joe.kent

Yea... You can find anything for these bikes on ebay

Good call... Mine being 03 i forgot that little factoid

I'm not sure of what you are asking... I added a brake/tail... Mine is just smaller and relocated... Still functions as noal light did. As long as the light you use has 3 wires... You should be ok

I got an led off ebay... Got it mounted last night... Have some tweaking to do then I'll post pics

Do you have any pictures of it?

I'm putting my shee back together, and I want to utilize the bolts that held the airbox... i want something small yet effective... any ideas/pics?

I did the same thing.. just splice the two wires together, use a tether as the key. Also got ride of the big black blob for on/off and headlights. Rewiring the banshee is pretty simple. I have a toggle switch now for the headlights, On (High) and off. Simplicity looks cleaner to me.

how much? does it need rebuilt?

Anyone out there have the piece that the kicker slides over and is secured to? Need it shipped to 74033

Pulled the bowls, took the carbs apart, used carb and choke cleaner... Gave 'em one hell of a mean stare down and put them back together. i put them on the bike, attached the fuel lines and viola.... no leaks. THANKS guys for the help!

Sprinkler, What is the best way to disassemble them? Do I need to strip them down, pull all the jets etc out? Also, what is best to clean them with? Supposedly they did the hypersonic cleaning on the carbs too, I know they are much cleaner than before.

So I took the carbs to a shop to have the TORS eliminator kit installed, since I didn't have the tools to do it myself and didn't want to screw it up. Today, I put the carbs back on, and installed all new fuel lines and drain tubes, but now when I turn the petcock to RES or ON, the bike will run, but 3 of the 4 Vent hose/Drain hoses will "leak" or flow fluid. The only one of the 4 that doesn't leak gasoline is the one directly toward the rear of the carb with the choke. Anyone know why the gasoline is flowing from the vent/drain tubes?

These are off a Blaster, fits a Banshee, just not my wheels. Make me an offer, powder coating is fresh, here is the color out in the sunlight on the frame https://picasaweb.google.com/lh/photo/CvvS3wYfJuTVsR3fH26_i9hFjzRHEhxu4HDprFnqCYM?feat=directlink Here are the hubs: https://picasaweb.google.com/Joe.Kent79/RearHubs?feat=directlink Make me an offer, tired of them sitting around..

I second this... Great guy to deal with, very fast shipping and the part I got was clean as could be.

You can't buy tires for the blue ones... lol.. For the sand, drag racing you can't beat haulers... as far as dirt, I'm not sure mine will never see dirt after what it's costing to make it shiny and new. Welcome to the board, and welcome to your new money pit!

Actually in Nowata, a week ago today it was -35, and today, 80.... Yea, only here in Oklahoma.

Anyone have this laying around? Mine isn't going to allow me to put it back together? I'm in Oklahoma... 74033. Thanks in advance.

Part out the red one... only b/c i want the plastics... if you do part it out.. I want "dibs" on those plastics.

Spend the extra money and get the dual band router, you WILL use it in the future. I have the E300 by linksys and its awesome. Can use multiple devices with very minimal interference. What ever you get, update the firmware immediately.

I have one I will sell you.. 16 GB flip with HDMI and accessories, 225 shipped if you are in the US. Wife now has iPhone and we don't use the flip. It does excellent video, especially outside in the sunlight.

Where did you get that front bumper?

So I've got my shee torn apart, waiting on some parts to get back from chroming, and I'm wanting to delete the key/ignition all together. I want to get a toggle or rocker switch for the headlights, and mount it somewhere concealed, and do a tether on the bars. Also, I would like to hide a kill switch, anyone have thoughts on this, as I am no wiring guru....

Received the crossover tube today... man it's even polished up. Thank you so much!

Google is your friend... you can find autoCAD on the torrent sites...

PM sent on A arms, may be interested in rad hoses too... what color are they?