barranquilla
-
Posts
17 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by barranquilla
-
-
where can i buy these fenders and graphics in blue?
thanks
-
Jbooker82 where did u buy them??
-
Vrx 46 the black color way, thank you
-
Where can i buy oem 97 banshee graphics??
-
Are there any slick tires for stock 9 inch rims? If not for 10'?
-
Will cpi inframes work well on a NOT ported 4mm long rod crank, vforce 3, .50 oversize pistons, and timing plate?
What timing would you use on the timing plate?
-
Will cpi inframes work well on a NOT ported 4mm long rod crank, vforce 3, .50 oversize pistons, and timing plate, stage 2 jets.
What timing would you use on the timeing plate?
-
Barranquilla d donde Eres?
De donde crees?
-
the prob is im buyin a set online and idk if theyre big or small bore and my only reference is a picture
-
How can i tell the difference between cpi out of frame small bore pipes and cpi out of frame big bore pipes??
-
I have a pair of keihin 34 carbs and i havent figured out what size jets to install. i have fmf powercore2 timing plate dynatek coil and cdi box and 4mm longrod crank and .50 oversize pistons.
-
whats the difference other than how they look?
-
so cpis and port job it is
-
Sounds like a set of CPI inframes is what you need. Pretty much a T5 on steroids. It is an inframe drag pipe but it comes on sooner than Shearer's. Shearer's make a little more on the top end but dont come on as soon as the CPI's.
What if i dont have a port job done? and if i do will it still run good with 89 octane gas
-
depends on how bad the pipes are....If they are a little dinged up, i would run them until you are ready for porting. Then i would get with a site sponsor and talk about your porting and then they could reccomend a pipe for you. If you need new pipes asap, then i would get a set of pipes that will fit your riding style.
yea they are pretty banged up my brother crashed my bike and i dont know what pipes fit my riding style
-
I currently have t5 but they are pretty banged up and i was thinking about changing them. I currently have a 4mm long rod crank with .50 oversize pistons vforce3 reeds timing plate. i like to drag race, but i really have no clue what to do with the pipes buy t5s again or get another type of pipe. I also want to get a porting job but down here its hard to get quality gas its around 89 octane please give me your thoughts about what i should do.
FENDERS GRAPHICS
in Banshee Appearance
Posted
Couldnt find them on ebay, do you know how to look for them?