03rider

so im tryin to purge/bleed out the air in my coolant sys. the CORRECT way cause im gona do a pressure test,and im pretty sure im not doin it right, does anyone have any good or helpful tips. id realy apreciate it,my poor bike hasnt been out in weeks and it and i are in need a good hard ride without over heating or blowing seals.

i have a 30% bigger radiator (aluminum-new) and i still get fluid on top of my pipes wen hot,as did the stock one. im more worried about stayin cool then compression,would it be a good investment 4 me. i have the 30% radiator-(2)in line coolers,one on in and out lines,and i run engine ice coolant,thinkin it would help. nothin. i hear all good about the 21c.c domes,but since ur the only 1 i have heard on the oposing side,wat would u think? thanx

cool,thanks!

is it cool 2 run any 50/50 or is there a certain kind i should use? i run engine ice now but with a leak that gets a lil expensive.so if i could use anything,i would feel real stupid

i to have a leak.stock radiator spittin when hot out of front left (if lookin from front) there are no over flows there. so i put an after market aluminum 30% bigger one in with an in line cooler on each line out of despriteness and this danm things leaking on my pipe in the same spot, but only enough to see the steam but cant find the leak. now i know the things over heat quick, but how are all you desert,west coast and south riders keepin cool? im in ohio were it pretty cool most the year. and i just cant figure it out. PLEASE BANSHEE OG"S, any advise would be greatly apreciated. Ohio 03 rider