juiceboxxx26

price reduced $150 shipped

I have a pair of reed spacers. Aluminum With all hardware. $30 shipped or best offer please make offers email me at [email protected] or text 646 335 7573 for pictures

also for pictures text me at 646 335 7573 or email [email protected] thanks

Hey guys i have a pro design cool head im looking to sell. I picked up a motor and this was on it. looking to sell it Looks good one dome is scored from top end going. i am unsure the size of the domes. it has all of the parts including rubber o ring but will need new rings. please make offers im looking to get about $180 for this but deff negotiable.

sup guys i parted out an entire yfz 450 and i have a complete front brake setup. i have the front master lines and front calipers i also have yfz front spindles with brake rotors if you have questions please text me at 646 335 7573 and ill send you pictures. i also have a lot of yfz parts from the part out left over please let me know. make offfers Front SPindles $100 shipped Front Brake Setup $100 shipped

I need a stock intake cross over tube asap thank youu PM me if you have 1 with a price I have paypal thank u The Metal Tube that connects the 2 intake boots

I have a few problems with my new shee. Just built her and now finally got it running and when it starts up it idles very high and is unresponsive to the tors scres to adjust the idle i have the jets at 25 pilots 2 turns out on the air screw and 270 mains has full stock exhaust k n n air filter at sea level and that was with the air filter lid off when idling i am not getting strong exhaust out of the tailpipes the left carb was dumping fuel and then when i adjusted the float in the right side now the other side dumps fuel. Please help me out what would cause the bike to idle high and hang when i rev it up?

port richmond

i gota full set of blue if your interested make an offer and i will get you pictures they are in pretty good condition

PRICE IS $900

Selling my banshee engine .50 over out of a perfectly good running banshee it looks good This is a perfectly good running yamaha banshee YFZ 350 engine It came off of a perfectly good running banshee It is a 2001 engine Tons of Compression. Shifts great. No problems with it at all runs good off of a bike that started first kick. I will include : Complete Engine with reeds attatched, carbs attatched with tors , and engine mounting bolts. The only thing you will need is the gas tube that goes to the carbs, i will take an updated picture of the engine asap. Right now it does have the stator cover on it. The Sprocket is welded on due to the chain break whipping the threads so i had to weld it on. Works perfectly fine It was removed because i was going to rebuild my bike but do not have the time right now so decided to jsut sell it any questions email me at [email protected]

all items recieved and perfect thnx

I am selling my Yamaha Banshee Yfz 350 Its a 2001 Banshee This is a rolling chassis complete with everything except the engine, I have all of the plastics a complete set of blue blastics and a pair of front red and a rear red plastics , it has a stock exhaust aftermarket front bumper aftermarket reat bumper, the frame has been painted black, it has steel braided front brake lines, all brakes are blead properly and fully functioning i will include chain and other parts i have laying around for it, Also has a seat it is purple but in good condition and can easily be reupholstered asking $800 or best offer i really want this bike gone asap i need room email me at [email protected] for questions

idk bout yell ow how much are you asking?

i got a full set of blue 1z

i have a 28mm mikuni blaster carb with thumb throttle pm me if interested thnx

lookin for a set of gas tank covers with a radiator plastics, i have red plastics and looking for possibly a black Gas Tank Cover with black Radiator cover please let me know what yopu have thanks

Yea it's not doing anything . I don't think I have an air leak . I will look deeper into it later . Maybe trying to open the rezzy cap and try new fluid, what's the difference between dot 4 and dot 3. Why do I need dot4???

hey guys im having trouble bleeding my front brakes. I pump them up with the lever than hold then i loosen the bleeder screw on the caliper but i only get a little bit of fluid out , it doesn't seem that it gets and harder to squeeze in and no movement on the caliper at all . I dont think there are any leaks, please let me know any tricks to this thnx

oh man i got 1 already, would you have mid pipes? for a stock exhaust??

how much and where are you located?

bought tons of stuff from this guy and all as described, do not hesitate do to business with him A+++

hey i need a pair of stock exhaust mid pipes . im going riding this weekend and need to build this shee so i can go please let me know asap and i will pay tongiht and extra for priority shipping thnx

hey do you still have these???

Hey i need a set of stock carbs with tors delete kit installed. I have paypal and will send payment tonight i need them for this saturday so shipping must be immediate Thanks