stema1966

Any Offers? You wont offend me. If I dont sell it, I will start parting it out. Thanks

I am selling a 1995 Yamaha Banshee which is in good condtion. I got the Banshee last year and was told that it had a fresh top end with a bore of .30 over. It has the stock carbs and it runs with an open top air box, K& N filter with an outerware cover on it. I have a title in hand for the Banshee. It has no major issues and is a strong runner. It has approximately 10 hours of trail riding time and 2 hours of woods racing on the rebuilt motor. It has some aftermarket parts which include: FMF Gold series exhaust, American Star +2 A- Arms with heavy duty heim joints, steel brake lines, RAD axel carrier, Douglas chrome wheels with chrome lugs, White Brothers boost bottle, YFZ450 tie rod ends, DG front bumper with rear grab bar, tusk hand guards, pro taper hand grips, tether kill switch, skid plates, nerf bars, new clutch plates (oem), Verde seat cover, plastic from a 2004 Banshee, and razer tires. The A-Arms have some surface rust near the heim joints, the rear FMF muffler has a gouge at the end, the left front rim has a gouge on the rim (rim and tire are straight), and the frame has some surface rust where the paint had to be sanded to obtain a VIN for the title. I am asking $2300 for the Banshee and am wlling to answer any questions or send additional pictures via email to anyone that is interested. I live near Pittsburgh PA and am willing to drive a couple of hours to meet for pick up purposes. I would like for you to come and ride the Banshee to see if it is what you are looking for. http://i1037.photobucket.com/albums/a451/mikefcpd/bansheehqpics001.jpg http://i1037.photobucket.com/albums/a451/mikefcpd/bansheehqpics017.jpg http://i1037.photobucket.com/albums/a451/mikefcpd/bansheehqpics002.jpg http://i1037.photobucket.com/albums/a451/mikefcpd/bansheehqpics003.jpg http://i1037.photobucket.com/albums/a451/mikefcpd/bansheehqpics007.jpg http://i1037.photobucket.com/albums/a451/mikefcpd/bansheehqpics010.jpg http://i1037.photobucket.com/albums/a451/mikefcpd/bansheehqpics009.jpg http://i1037.photobucket.com/albums/a451/mikefcpd/bansheehqpics006.jpg http://i1037.photobucket.com/albums/a451/mikefcpd/bansheehqpics015.jpg http://i1037.photobucket.com/albums/a451/mikefcpd/bansheehqpics011.jpg

Thanks to all the BHQ members who responded. I now have my coil situation taken care of. Thanks...

I was able to borrow a spare coil and wires off another racer. I am still looking to buy one but do not need it overnighted. Let me know what you want for a used coil/wires shipped to Valencia PA. 16059. Thanks

I need a Coil with ignition wires ASAP. I have an AWRCS race on Saturday and I was putting new plugs in my banshee and an ignition wire came apart. I have a 1995 banshee and I am willing to pay via paypal, check, cash or however you want paid. I would needed it shipped overnight so I have it on Friday. I know this is a long shot but I have had luck on this site before. Any help would be appreciated... I live near Pittsburgh (16059 zip). If you can help.. call me at (724)316-0637. Thanks

According to clymer manual 22 ft-lb. send my your email address and I will send you pic of it. If you have a cylmers manual. page 144 shows the bolt and page 148 has the torque specs Eccentric bolt is located next to the shift star. It is used to adjust the shift drum pins with the shift shaft.

I bought a set...Thanks to all who emailed me.

I will do that...thanks for the info.....

I am looking for a used set of aftermarket Banshee 2 + 1 a arms. I have purchased a set of yfz shocks and am looking to match them up with a set of Wicked, Full Flight, Pro X Type or whatever you have. I would like the ball joints to be solid and the a arms to not be bent. I am not too worried about the actual appearance of them because I am woods racing my banshee so the a arms are going to get nicks and scratches. Let me know what you have and I would like to stay under $275 shipped (Pennsylvania 16059) for the set but am willing to pay a little more if they are in great condition. You can email pics to mikefcpd@yahoo.com Thanks

Thanks to all Banshee HQ members that responed...I got a set of a arms....thanks again...

I am looking for a set of a-arms for my Banshee. I would the the balljoints to be solid and the a-arms ready to bolt on and ride. I have just purchased a set of YFZ shocks so I would like the a-arms to be stock or close to stock that I could bolt on the YFZ shocks. Please email me pics and a price shipped to Valencia PA 16059 mikefcpd@yahoo.com. Thanks

Pics of a-arms to mikefcpd@yahoo.com If they are not sold and the ball joints are tight. Thanks

Ball joints all good on the A-arms. If so...I will take them pm sent

I had an issue last year with my banshee not starting. I had spark also and it ended up being related to my thumb throttle adjustment. I adjusted the thumb throttle slack adjustment back down and it started right up. The manual stated that you shouldnt give the banshee gas while trying to start it. With the thumb throttle adjustment off ...mine must have been getting too much gas while trying to start....Just a thought.... Hope it helps...

Here are close up pictures of the plastic. I cleaned with soap and water and have not attempted to take the scratches out. I did noticed that there is what appears to be an exhaust burn on the one rear fender. It is not all the way through the plastic. I am going to reduce the asking price to price to $135 (you pay the shipping). Let me know if you have any other questions. Thanks. http://i1037.photobucket.com/albums/a451/mikefcpd/Banshee/Picture006.jpg http://i1037.photobucket.com/albums/a451/mikefcpd/Banshee/Picture002.jpg http://i1037.photobucket.com/albums/a451/mikefcpd/Banshee/Picture009.jpg http://i1037.photobucket.com/albums/a451/mikefcpd/Banshee/Picture011.jpg http://i1037.photobucket.com/albums/a451/mikefcpd/Banshee/Picture008.jpg http://i1037.photobucket.com/albums/a451/mikefcpd/Banshee/Picture007.jpg http://i1037.photobucket.com/albums/a451/mikefcpd/Banshee/Picture003.jpg http://i1037.photobucket.com/albums/a451/mikefcpd/Banshee/Picture010.jpg

Here is some general photos of the plastic: IMG]http://i1037.photobucket.com/albums/a451/mikefcpd/Banshee/0703091835-1.jpg[/img] I am going to clean them up tonight and take close up photos of the plastic and then post the pics

I have a set of Maier banshee plastic (front/rear) for sale. They are orange in color and were brand new when I bought the banshee last year. They do have scratches on the right rear fender from a roll over. If you are interested in them send me a PM and I will email you detailed pictures. I would like $200 for the set and you pay the shipping. I live near Pittsburgh PA if you want to pick them up. The Shee I have shown in my profile has the plastic on it. Let me know if you have any questions. Thanks. Mike

How much for the twist throttle shipped to 16059. Thanks. Mike

Thanks a bunch.....That really helps....

The frame is powder coated and I started to sand it off looking for the vin....I have not been able to locate it yet.... The stampings on the case...is it the total vin number

Can anyone help me with the location of the vin number of a banshee?