miami350

a guy sold me a banshee off the list... i was lookin at the vin and it say::: jy43ggv17wa112166 could that be right i see all other banshee start with jy43gga ... Now im scare if they messed with the vin numbers on the frame

So i cant run 513m06625 with my new crank ... i need spacer for it or cut my dome?

im new to banshee so here we go with some questions........ my stock crank went bad and the pistons i had was wiseco 513m06625 they told me my piston was .090 over so now i got me a 5mill crank for my bike and they told me i can't run the same piston that i need long rod piston that start with 795m0 but i cant find the .090 over long rod piston do they even make cant find it on wiseco site or no where...

who is ur builder?? i know a few ... but am lookin to do it my self aint no money right now LOL

the problem started after i let the bike sit for 3 weeks the last time i ran it was fine and also i put in a new throttle cable. carbs open at the same time. carb have the tube the go between it for the choke, fresh gas, havent check the gap on the stator - flywheel

the banshee starts up but when i hit the gas on it on the low rpm it bogs then when i hit the gas all the way it bogs bogs bogs real slow till the rpm go high.. then when i put it in gear i have to play with the gas so it can stay on when i do that it bogs and back fire then i let the clutch go it ride real slow then when it get to a high rpm it ride fine then when it time to come to a stop it act like it want to shut off.....bad piston ring?? "piston look good from the ex and intake side" or bad stator????? i already put new plugs and mixin the gas 4oz to on gallon. I also clean out the carbs and i did a compression test and the right side had 100psi and the left side had 115Psi is that low???? thats with the two plugs out and the throttle wide open !!

What is the compression Psi on a Bone Stock banshee... im have some problem with my i did a compression test and the right side had 100psi and the left side had 115Psi is that low???? thats with the two plugs out and the throttle wide open !!

just got a banshee off a friend... the banshee starts up but when i hit the gas on it on the low rpm it bogs then when i hit the gas all the way it bogs bogs bogs real slow till the rpm go high.. then when i put it in gear i have to play with the gas so it can stay on when i do that it bogs and back fire then i let the clutch go it ride real slow then when it get to a high rpm it ride fine then when it time to come to a stop it act like it want to shut off..... was thinking the parking wire??? or bad stator????? i already put new plugs and mixin the gas 4oz to on gallon. I also clean out the carbs

everybody telling me about the oil nothin about if i have to replace the clutch

and how much oil....

new to the site and to banshee :-) Just picked up a 04 banshee off the craigslist... and i was riding it on the last gear and the clutch feel like its sliping.. is it time for new clutchs??? clutch lever have a little play on it.. also was the best motor oil i should put in the gearbox?