252wheelieking

I know right....lol...but some things that are simple to some is confusing to others

Ok...The basket that I brought from a member on here didnt come with the gasket but it did have the belleville washer. The washer is just in there freely & it seems if I had the gasket installed it would make up the extra space that is causing the washer to move freely. Is it a must to run the gasket & washer on the aftermarket baskets? From the link Starwriter posted, I took it as AKheathen was saying it is your preference to use the gasket or not. It was not to much mention about the washer other than a member name bigborebanshee stating that you can omit the gasket & washer as they are not needed with the aftermarket baskets. Is this true? Im just being precautious cause I dont want to shatter everything on the clutch side.

I didnt see the installation diagram of the basket on bike bandit. All it showed me was the primary drive gear & basket but not how the washer goes on the back of the primary gear.

I disassembled the basket again & re assembled it the way it's described in the link you provided. Everything is tight now but the conical washer is just in there loosely. Is it suppose to be in there free like that? What's the purpose of the conical washer?

What's wrong with that? He used the search button as most of yall would tell him if he asked a question.

Thanks Starwriter & Coupelx for the help. That write up should be a sticky cause its some really good info in there.

You was right Coupelx. I disassembled the basket & installed the large washer in between the gear & basket like you said. Problem solved Thanks Reek.

Ok I disassembled the whole clutch basket. I see this large inverted washer that's shaped/looks just like the smaller inverted washer that is used to tighten the gears on the crank. It was just laying over the smaller gear on the back of the clutch basket & not in between the basket & gear. So I should install this large inverted washer in between the basket & gear to make up the free play?

Can I get this washer from my stock clutch basket?

Can you show me a pic of it or link me to what the washer looks like?

I just brought a used billet basket from a member on here. Looks great but my only concern is the gear & basket having a little separation play. Its not moving back & forth like when the cushions are bad on the stock clutch basket. Its more like the gear & basket trying to separate from each other when you pull on it. I need to know what needs to be done to get this basket assembled the correct way. Thanks all help is highly appreciated. Reek.

What size axle fit the carrier?

You might be right.

PM Sent

I need your paypal address

How do anybody suppose to know what they are paying for with NO PRICES & NO COMMUNICATION? I sent a pm to you & have not got a response yet. weird for sale thread if you ask me... Just saying.

Fucking phone. I meant zilla you a fucking BHQ joke. Finish you fake ass EFI......LOL

Nieskes you right I was trying to make it so that everybody can comprehend but villa to a BHQ joke. All I have to say to you is EFI aka enough fucking ignorance! Lol

Did you read the whole seat cover or stopped once you seen Nicki Manaj?

From this statement sounds like you don't like her & you probaly never met her which is considered a (HATER) just saying........ Since you would like to know the reason behind me naming my bike after Nicki Manaj. It is because it takes a GROWN MAN to hold a bitch like Nicki Manaj down. She is killing the game at what she does which is majority MEN & it isnt a MAN out there right now that I know of that can TAME her. So I fully understand why you asked that question in that tone. LMAO

Cause that's the name of my bike

What?

Thanks Joe

PM sent

I got mines done just in time....sweeeeeewww