gunner6262

it flows

ok so i pulled my coil since the frame was painted and i sanded down and made sure there was good contact for the coil. the coil checks out for sure. i blue loctited the two screws that hold the pick up and checked clearances and everything was good. i definitely have spark. my plugs look dry though for some reason like gas wasnt getting in? i mean my pistons had an arrow on the top and i have that pointing toward the exhaust side away from the carbs. i have a cool head on this as well. so i dunno the carbs should be spitting fuel in there but for some reason my plugs are dry??? i hope i put the pistons in the right way. i dunno how it could be the carbs. i have the float heights adjusted on the 28 pwks and everything is clean. the pistons are in with the two holes on the side facing toward the reeds. is that correct?

yeah there was no adjustments made to the carb slides from the last time it ran. i didnt add anything the only thing i did was remove the key but that was before the rebuild. i mean the spark seems ok. i figured it would be stronger but the gap is quite good so i dunno. its acting like it almost wants to run ya know but it just doesnt wanna take off

when i put it together i checked the clearances and it was good. i have spark to the motor so i know thats good. i didnt lock tite anything... was i supposed to?

ok guys tore down completely over the winter had things painted and so forth and i split the cases and looked everything over. everything was great and resealed the case back up and was waitin for the top end to be bored. well i got the back with the pistons and everything was great. everything went together great got fluids in and stuff and no leaks. well i been kickin the shit out of it and cant get it to fire. i checked spark and i got good spark. i cleaned the carbs and set them between 20 and 22 mm. and the spark plugs are new. so im assuming its getting gas. i have even tried alittle starting fluid and its a no go. i know it has 28mm pwks with slide throttle so no tors here. the timing is advanced +4. forged pistons 66mm and forged crank and rods. does anyone have any idea where to go with this next? its really getting aggravating

stock intake boots still available?????? shipped to 43526??? send a pm