Firemann32

I went to Grainger and bought some, same place I got my studs for my cool head after I lost one. Spent $2.88 for 2 studs instead of $50 for a new set from Cool Head, WTF!

Also forgot it has a new o-ring chain

I have a 2003 Yamaha 660 Raptor with a clean/clear title that I need to sell. I just went through this quad for my sister, 2 days after I finished it she decides that she nolonger wants a fourwheeler. So now I need to sell it. New bearings in the front hubs. New brake pads all the way around. Cleaned the carbs, new oil, filter and antifreeze. Aftermarket K&N air filter with Outerwear, bumper and grab bar. Good battery (1 yr old, stored in the garage and maintained) Ok tires on freshly black painted wheels. I will post pictures this afternoon. Asking $2200 417eight 40 three 217

I take that $202 quote back, I guess I didn't log in. After I logged in the amount changed to $171 Looks like if I pull the stem it'll drop it to $160

I was just planning on wrapping cardboard around the tubes, not boxing it up. Yea, I've heard using a bus is cheaper, we do have a Greyhound hub here in Springfield, I live in a suburb of Springfield Missouri . I'll let hime decide if he wants it, I'll do almost whatever is needed to ship it.

Sorry for the delay I endedd up working a 48 hour shift. I checked with Fed Ex and they say $202 for ground and thats through my account. It weighs 55#'s is coming from 65619 and has the following dimensions 62" long x 28" tall and 19" wide. That's allow about an inch for cardboard and tape. I might be able to drop the heights from 28 to 26 if I take a steering stem of and attach it inside the frame but I didn't leave calculated with a 26 inches instead of 28. If you come up with a cheaper way to ship it and are interested let me knowI and I'll do what I can.

I will have to get you a price tomorrow, I'm on my 24hr FD shift today.

That's a hell of a deal too! $300 with the carrier!

Price dropped to $300 firm through next Monday after that I'm just going to have it powdercoated and swap my frame over to the fresh PC. I have the title in my hand.

Thats the wrong price, asking $400 on here Here's pics..... http://springfield.craigslist.org/mcy/3141601743.html

These are the only pics I have.

I forgot to add the price so if an admin could do it or tell me how to gain access i would appreciate it. Asking price $500 + shipping Open to offers and possibly partial trades for Raptor 660 parts.

I have a 2001 Banshee Frame w/title that I no longer need. I planned on building a Banshee with a sled motor but I need the room and to finish my son's ATV before I do that. Frame has steering stem and tie rods. Will post pictures Tuesday. Any questions call,text or email 417 eight 4 zero 321 seven Located in Springfield, Mo

Everything is sold.

Who said Fuck HQ?

Oops, I sent it to the wrong #, I used an 8 instead of a 0 Should have gotten it now. Update. I would like to sell as a whole lot but I'm open to offers.

Got your PM, Send me your email or a # so I can send you a pic.

I'd like to sell everything as one giant lot for $300 + Shipping (Offers) http://springfield.craigslist.org/mcy/3078291867.html I will get better pics posted tomorrow, until then the Craigslist ones are the best I can do. I would consider breaking it into two parts lots. 1st Plastics to include, Plastics, 2 radiator covers, 2 tanks covers, Gas Tank (good screw holes) and Seat $150 + Shipping 2nd All the other Banshee parts in the pictures. $175 + Shipping I'm open to offers but I won't split the body work I'm trying to make some room and need to get ride of all of this stuff listed below. I would trade for Raptor 660 parts list at bottom. Here's the parts list of what I have: Wiring harness Braided steel throttle cable Steering stem w/ tie rods a-arms (one has a small dent didn't affect quad, all boots are good) Front brake system w/ lines Spindles, hubs, rotors and calipers Swingarm w/ linkage Rear master cylinder and line Rear grab bar Foot pegs PC'd black Adjustable timing plate Gas tank Seat (nearly perfect) Plastics (front fenders are painted and shaved) Box of Misc parts Not included in above pricing but I also have a set of cylinders, they can be bored once more After market Seat Cover Any questions call, text or email 417 eight4 zero 321seven I'm willing to trade for a aftermarket wider axle or a +2 swingarm & Carrier or a full set of Yamaha sport ATV Tires/Wheels (4x156 and 4x115)

I really just need it to be stiffer since the geometry is all changed with the +4 swingarm. It doesn't have to be longer, just trying to avoid another $500 rebuild and since I already have the Raptor shock I thought I'd ask.

I have a R6 shock if someone is interested just PM me. I've decided to go a different route and not build a second Banshee, going to build a small bike for the kid. I know one guy I talked to wanted to use a pair of them up front to lower the front end for barrel racing. If you wanted to do that I can get a second one from my buddy.

Wow, OK that's not the route I was looking for. I was hoping the were longer and stiffer since I put that +4 on its sitting really low. My Banshee is at my storage unit so I was''t able to compare them side to side.

Does anyone know? Is it any better, i would think it's stiffer. If so what are the mods if any?

I own 2 of his swingarms both +4's one on my Raptor and one on my Banshee. I also have his first sets of extended a-arms for both, he used my bikes for the mock ups. His stuff is definitely well built and very sturdy, he stands behind all of his work. I can send pics if you want just PM me your contact info. Chris

DAMN!!!!!!!!!!!!!!!

Yep, got that all covered. My first thought was an air shifter but was sure how well they worked. Any tips on where to find a kit ir do i just need yo make one?