YFZRACER22

To answer alot of PM's at once yes I will give a price break if you buy more than one item and all shipping is insured with a tracking number.

Any pics? Throttle cable?

Parts I am looking for; Hinson or Duncan quick change clutch cover, Roll Design +3+1 TRX250r or 400EX Long travel arms, +2+1 sterring stem

Works shocks are 14.75" eye to eye

Both sets of nerfs are aluminum and neither set has heel quards.

Cylinders sold pending payment, I have the pistons for sale still 513 wiseco 65.00mm new with rings $100

I am getting alot of PM's please include an email address or phone number, its easier for me to check this and reply from my phone

The A-arms are made by Dean Sundahl, he also modified my stock 1989 chassis to accept arms and stiffen the front end for dessert racing. This was my dune bike.

I am cleaning out my garage and selling off the spare parts I have collected over the years. This is a small list of what I have if you are looking for something not listed please email me (Put Banshee in the subject line). I update list as items sell so you dont need to ask if I still have the item. Images can be seen @ http://photobucket.com/Nor-Cal_Creations Banshee Stock head & cyl. w/ new pistons 65mm $300 Banshee cases port matched: $180.00 RZ350 cases: $180.00 Banshee Transmission w/ forks and drum: $160 RZ350 Transmission w/ forks and drum: $175 Banshee AC nerfs w/ blue nets: $75 Banshee DG nerfs w/ red nets: $75 Banshee Ricky Stator 3 light rack: $85 Banshee 1989 frame w/ Title, A-arm modified frontend, +2+1 arms, spindles, tie rods: $300 Banshee Works shocks w/ Res, for 185lb B rider on +2+1 arms: $200 Banshee FMF Ram valves with reeds: $75 Banshee Stock cages with CarbonTech Reeds: $50 Banshee Ported Stock Cages w/ CarbonTech Reeds: $75 Banshee Rear Shock w/ Race Tech Valving and Spring: $250 Banshee AC grab bar $25 Banshee AC glide plate $60 And tons more, I also have tires and wheels.

I am looking for a Hinson modified clutch cover. I know somebody has one they have swapped out. Let me know what you have. Thanks, DMC

I have stock cylinders (no porting) with new pistons (65.00) and stock head, I am asking $350 shipped. I can email you pics if you are interested. Thanks, DMC 704-975-6749 Texting is better than calls

I have a set of stock cylinders with new pistons (65.00). this was a stock bike I bought to rebuild but no longer have the time or space so I am parting it out. I already sold the roller. Thanks, DMC

PM Sent

I have a set with new pistons, 65.00 mm, $325 shipped. I have pics let me know

I am cleaning out my old race stuff and have 2 spare engines and a stock engine, let me know if you are still looking Thanks, David

are you still looking for plastics i have a new set of ufo black full fender front and rear. I am located in NC. Call me if you are interested 704-975-6749 Thanks, David

Roll swingarm sold, 28-30mm k&n filters sold, rz stator and flywheel sold,

Pics, Emails, and PM's sent. RZ stator and flywheel sold, AC nerfs pending, Pro Design Plate and Rear Brake Pedal Pending. I have gotten interest in the cylinders and pistons from the 1987 engine. Any interest in the cases or trans? Also have interest in the complete 1987 engine. I dont care if its complete or parted out I just need this stuff gone. Thanks, David

What does the end of the silencer look like?

Cleaning out my garage so I have room to rebuild my first banshee. I am parting out a 1987 banshee (roller already sold) and a 1989 banshee (Ca Title, green sticker legal), along with a ton of parts I have accumulated over the years. I am willing to part out the stock 1987 engine if I get enough interest to do so (PM me with what you need). I am located in Mooresville, NC 28115 all items can be picked up to save you the shipping. The following list of items is only a short list of what I have let me know if you need something else. 1987 Stock Engine; (sold as parts) I took this in on trade was going to be a drag bike project, but I have no time. No porting, new pistons and was told fresh bore, all stock no electrics. Asking $500.00 O.B.O. plus shipping 1990 Banshee Engine: (Was my Dune Bike) ADA Coolhead, Toomey Racing Stage 3 Port Job (Mid-Top), Cases matched, Runs on Premium Pump, Barnett Kevlar CLutch, Lightened stock flywheel, ported stock reed cages with carbon tech High Tension Reeds, Used 30mm Pwk's with Toomey T5 Pipes not included. Asking $1000.00 O.B.O. Plus shipping AC Glide Plate $70.00 Shipped Durablue Axle Measures 34.5" hub to hub, I think its a HD axle $80.00 Shipped (2) sets of stock rear hubs $55.00 a set shipped 1986 RZ350 flywheel, stator, and timing plate $130.00 Shipped Msd Ignition complete with harness, new coil and 2 batteries. $275.00 Shipped 1992 or newer Front brake calipers with pads and +2 steel braided lines $70.00 shipped Toomey 2 into 1 airfilter adapter with K&N filter $45.00 shipped AC grab bar $40.00 w/ # plate, $35.00 w/o Shipped Rad Bearing Carrier Stock style, needs bearings $70.00 shipped Durablue swaybar, like new $300.00 shipped Works front shocks set up for dunes +2+1 arms 160-180lbs rider. $265.00 shipped Race tech revalved and resprung stock rear, set for 180-210 lbs mx b rider Nickel Plated stock pegs lowered 2" $55.00 Shipped (2) K&N filters for 28-30mm PWK carbs $40.00 Shipped JT steel sprockets new in package (14 front and 42 rear) $30.00 shipped (2) Stock radiators w/ caps $35.00 each shipped Pro Design billet airbox flange no filter $10.00 shipped Silver Stock front fender braces $35.00 shipped Stock carb boots with pro design boost bottle $30.00 shipped 1/4" Reed spacers $20.00 Shipped Stock gas tank w/ petcock $40.00 shipped Roll Design -1 swingarm Blue $400.00 shipped AC nerfs Blue nets ------- Sale Pending Dg nerfs Red Nets $70.00 shipped I will list more later this weekend and try to check the thread twice a day. For a faster response PM me your number and I can text you pictures and answer your questions. Thanks, David

I have an Alba Action 320watt stator on my desert banshee, running (3) Hella Rally 2000. I have a triple light rack and a double light rack I run depending on the course. The stock banshee stator can only handle (2) 35w bulbs without major dimming at idle. I recommend running the biggest lights you can get 8 or 9 inch and switching the bulbs to 35w. To maximize the reflectors. If you have any ?'s pm me I will explain it more. Good Luck!

Are you still looking for nerfs? If so I have a set of AC nerfs with blue nets that bolt to the stock footpeg and would allow you to put bigger bolts in your frame