-
Posts
215 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by Dalton
-
-
With those mods 280-300 for main. Clean your carbs with carb spray if you haven't done it in a while.
-
At sea level I was at a 350 main 30 pilot 3rd or 4th clip with my ported 4mil with pods....... so you are close. Experiment with different sizes for each position (pilot, needle, main) until you get the pull from the engine you like. Only do one position at a time though and one size at a time.
Oh and one more thing...prior to doing any jetting take a can of carb spray and clean out all ports on carb especially the pilot. If it's dirty you will be chasing your tail all day.
-
-
2 hours ago, sheerider11 said:
Do not run knock off filters. They let A LOT of dust through. A shit load. I couldn't believe how caked my carbs were with one ride. Immediately in the trash they went
Sent from my SAMSUNG-SM-G891A using Tapatalk
Agreed.....only run genuine filters.
-
On 6/10/2018 at 11:22 AM, Dalton said:
Hello question about these pods?......https://www.ebay.com/itm/Banshee-YFZ350-AF-1090-RU-1090-Air-Filter-and-Pre-Cover-Pair-Fit-2004/251195493610?hash=item3a7c6b0cea:g:1JoAAMXQROxRfeSZ
Has anyone ran them?......... This is the size I'm looking for....... for some reason K&N does not make the angled neck version in this size.....I'm running Cascade Shearer small bore stingers with RU-1090 filters and I'm burning my Outerwears WITH the cascade heat pipe wraps! Also running UPP intakes.
The solution is these or going with RU-1080's which are 5" long instead of 6" which should clear pipes.
Thanks for any input!
So I ordered these pods and what was shipped was not what was in description picture with the angled neck.....so avoid this seller at all cost! Shipped back and they issued a full refund.
-
Stock carbs still for sale? Pics?
-
Just now, christoph.tamz said:
I run those on my shee and have no issue with clearance.
Sent from my SM-N920V using Tapatalk
Thanks
-
48 pilot 4th clip 155 main
-
Hello question about these pods?......https://www.ebay.com/itm/Banshee-YFZ350-AF-1090-RU-1090-Air-Filter-and-Pre-Cover-Pair-Fit-2004/251195493610?hash=item3a7c6b0cea:g:1JoAAMXQROxRfeSZ
Has anyone ran them?......... This is the size I'm looking for....... for some reason K&N does not make the angled neck version in this size.....I'm running Cascade Shearer small bore stingers with RU-1090 filters and I'm burning my Outerwears WITH the cascade heat pipe wraps! Also running UPP intakes.
The solution is these or going with RU-1080's which are 5" long instead of 6" which should clear pipes.
Thanks for any input!
-
I have 1 single 22x11x8 12 paddle Hauler Tire For Sale
Comes with a good tube
There are no holes or plugs in the Carcas
Look at pics a few of the paddles have tears but are all in tact
This would make a great spare tire if you have another like kind 12 paddle Ultralight
The tire held air no issues with tube
$100 Shipped gifted PayPal or pay fees
-
Looking for only 1 in good shape......my other tire has a hole in it so looking for another replacement. Let me know if you have anything!
22x11x8 72-74RO 12 Paddle
Thanks-
-
Still for sale??
-
-
3 hours ago, pjhackney said:
Are you in town to ship
Yes Sir!
-
Bump... still for sale...
-
nope in storage and I'm outta town on business.........
- 1
-
5 minutes ago, Ayesully810 said:
these still available?
they are.....only thing is I will be out a town for the next 5 months......I can hit you up when I return home.
- 1
-
Looking for a stock crossover tube in good condition. If you have the squeeze clamps for it that would be awesome no big deal if not. Thanks
-
UPP Intakes came off 35PWK's
Great shape no cracks clean
$45 Shipped Gifted PayPal or pay fees Thanks
-
I'm running 14/42 with 22inch ultralights 12 paddle with a ported 421 serval shearer small bore pipes & a +4 swingarm. I can launch in second. My weight is 190lbs. I tried many different sprocket combinations front and rear and I found this to be the most rideable. It's geared to pull 1-5...with 6th being useless. In the end gearing is how ever you like it the most IMHO. Hopefully this will be a guide for you.
-
SOLD to Canadianshee!
- 1
-
On 10/16/2017 at 3:28 PM, Canadianshee said:
Have you sold this yet? PayPal ready with fees and will put an extra 20.00 to cover shipping. Small box USPS good to go
Sent from my LG-H831 using Tapatalk
pm sent
-
Chariot Thumb Throttle
All fasteners there everything in great shape and clean
$100 Shipped gifted PayPal or pay fees...... no international lower 48 only..... Thanks
-
1 hour ago, Dalton said:
Hello currently running a dual pingle with my 421 setup and 35PWK's..
Wanting a petcock with a reserve. Could I upgrade carb bowls to oversized and if I did so would stock petcock flow enough fuel to feed carbs adequately?
What are your thoughts on this. Thanks
I called Pingle today and the height is about the same between the race version and reserve version....with reserve being about a gallon of fuel. It's about $162 between pingle and adapter plate. I'll probably go this route. Thanks.
Banshee jetting setup
in Jetting & Exhaust Forum
Posted
mains 330-350, pilot 27.5-30