meaderaca9
-
Posts
72 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by meaderaca9
-
-
if you get an aftermarket cdi i'd go with a ricks hotshot by rick's motorsport electrics. I'm not sure if it is better than oem but I used it to replace my cdi that had gone bad and so far i love it. stay away from ricky stator stuff. ive personally never used any ricky stator stuff but i hear its junk.
-
well i was hoping to replace the keyswitch because when i purchased the quad it didnt have a keyswitch on it. does it matter which tether wire connects to either wire for the killswitch?
-
hey guys. I got my tether cord in today. its the emgo closed circuit to run switch. i hooked it up to where the key switch would normally hook up and i wouldnt get spark. does it have to be tied in to the killswitch that ties in with the light switch? how are you guys mounting connecting them?
-
500 cc.That would be a phazer sled engine in a Banshee chassis.
If you want 70 hp just buy a new Highland! 
ya. that highland looks like such a nice quad
-
its prolly a little log but how about "a life without racing is no life at all"
-
dude your little workshop is killer. youve got a pretty sweet setup there
-
if its the right side caliper how much for the caliper and master cylinder?
-
hi, im lookin for a straight axle, preferably aftermarket, a right front brake caliper and the front brake resevoir with out the brake light leads. thanks
-
im interested in the axle, right front brake caliper and front brake mastercylinder if you have them too if you end up parting out.
-
email sent about axle rf brake caliper and mastercylinder
-
how much for the wiring harness shipped to 01516
-
if you still have the axle can u send some pictures to meaderacer2@hotmail.com. and what kind of durablue is it?
-
i did a search online and here and couldn't find anything about them. do they still exist?
-
ya. for me my guide says somethin about pregnant teens
-
bansheeAndRider,
I only ordered the 2-pin type a and the three pin sealed connectors. From what I can tell, the three pin *should* be compatible with the TORS tops, but mine were removed before I owned the bike, so I can't test this. The three wire was 100% compatible with my sport bike though. The 2 wire I got will not fit the rear brake switch; you'll need type b.
Unfortunately, the 4 and 6 pin connectors on their site are clear, and appear to more closely match the clear 6-pin connection to my CDI. I just so happen to be redoing my harness, so I took a pic, below. The best way to tell the difference is the latching device; to unlock the white ones, you press on the female, and to unlock the clear ones, you pull the latch on the male.
And the male end on the CDI:
To summerize, yes and no. The 2 pin type B and 3 pin will fit. The 6 pin clear will fit your CDI.
are you gonna be simplifying it with a dirtbike killswitch and a toggle for the lights? thats what im thinking about doing
-
thanks for all the help guys. the electrosport and Deutsch connectors look pretty nice. im probably gonna go with one of them. or the weather pack if there the easiest for me to get.
-
thanks for the help guys. when my new cdi comes in im going to pull the tank off and check over the harness. if the wires are melted anywhere im probably just gonna rebuild the whole harness. now that i kno the probes just come out of the connectors im probably going to use the stock connectors.
-
hey guys, im thinking about building a new wiring harness for my bike and i dont know where to get the connectors. should the local hardware store have them of am i gonna have to order them offline?
-
douglas. south of worcester
-
it needs a cdi. i ordered one but the guy i bought the bike from changed the wiring harness. so back goes the package and im waitin for the new one to come in. the bike is almost a basket case. im tryna talk my dad into lettin me strip it down this winter for some much needed pc work, a new top end, and some other mods.
-
its decent size. but my shee aint runnin right now. but if u guys ever want to ride it theres a small lot right in front of it. im not sure how much longer were gonna be able to ride it tho. a few weeks a back a kid about 18 brought his truck back there and flipped it. cops and stuff were out there.
-
well its pretty much a big bowl with some trails and quite a few hill climbs
-
im in ma. just north of the ct border. theres a pit i ride thats right behind my house. where in ct r u located?
-
the black looks nice. much better then the blue
tether cord
in Banshee Repairs and Mods
Posted
ya. after just spending almost 200 on a new cdi i really dont want to trash this one