davidonmars
-
Posts
125 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by davidonmars
-
-
Stock timing
-
They were 23 mm I believe but then cut for 4mm dome has some engraving 20 13 115
-
At 155 psi I didn't think I'd need higher octane. I'm about 1000 above sea level
-
Can anyone tell me why my
Spark plugs are
Coming loose? It's a cool head with 20cc 4 mill domes running 94 octane
-
390 is huge what motor do you have?? I got a 4mm dune ported and I'm at 340 mains 25 pilots
-
I can't for the life of me bleed these brakes. I just changed a caliper on the front and I tried for about 5 hours to bleed them. Pumped them and opened bleeder and sometimes fluid came out slowly and other times air. Reservoir never dropped. Hooked up a line to the bleeder then to the a bottle with fluid attached to a chain above the quad. Played around with the lever while the bleeder was
Open like a YouTube video showed for a good 2 hours. This will not
Build pressure for the life of me. I ha. Good solid lever squeeze before all this. Help me
-
Leave pilot stock 25 and try 290 mains stock needle middle clip
-
Got the crank off a member new but opened in box. Was wondering of these are supposed to be welded from factory? Couldn't see any welds on the pin. Can I tell which crank it is by the number on the rod? As far as I can tell the rod does look longer. Thanks
-
So the green part faces inside clutch cover?
-
-
-
Can't do shit
Anyways who wants his number
-
I'm pretty sure I sent as gift I'll log
On see what I can do
-
Got a coolhead and domes from him. Wrong dome size not what he said and he said it came with o rings but they weren't there. I have his number but he's not answering or returning texts
-
Bump
-
Anyone have pm me
-
To the top
-
Bump
-
I beat craptor 700s with my
Bike with just pipes. When I added my porting it was no longer a race
-
Anyone got a set of these pipes they want to sell?
-
Got them coming thanks
-
Looking for 795 long rod pistons. 64.75mm would be ideal but not sure they make those of need be I'll bore to 65mm if anyone has a new set laying around they would sell. Thanks
-
Hey guys looking for a cool head and 20cc 4mm domes if anyone has. Let me
Know. Thanks
-
Text me 4165710306 just blew a rod bearing on my stocker looking to upgrade
Cool head spark plugs loosening
in Banshee Repairs and Mods
Posted
I'm not sure who cut them I bought them off a member o the board. As far
As I can tell reading the numbers done
Volume is 20cc squish angle is 13 and 115 for long rod. Stock timing stock carbs 330 mains. I'll have to use another gauge tonight