chevy913

Looking for a rear Marvin Shaw 13.5" thanx.

Got my axle with hubs sprocket hub and brake disc and hub. Everything was in great condition and packaged very well and arrived pretty fast. Great seller and great guy to deal with. Thanks again Tony

Pm me the lowest you'll take for the swingarm axle and carrier. Also does the swingarm take stock shock setup?

Can you email pics of the chrome a arms and spindles to [email protected] also how much for those shipped to 48312?

it idles fine but once you rev it up it gets about half throttle then bogs down farther into it. Needle clips are 2nd from the bottom with 200 mains and 52 pilots. Stock timing running 110 fuel. Put it into gear and it bogs down real bad. Fmf fatty pipes with turbine core 2 silencers.

I have a fresh +.20 bore uni pod filters 34mm keihins drag port milled and o-ringed head stock crank trued and welded. Looks like elevation is about 600' ?? Silver lake michigan and temp is around 75-90 degrees. Or if someone around the Utica michigan area could tune it or refer me to someone that knows what they are doing? Thank you and any help would be appreciated.

Had a great time out there even tho didn't really get to ride the banshee. Nice riding and hanging out with ya chris (wheelmanslim). Can anyone tune my bike around the Utica area?? Was supposed to be tuned and couldnt even get out of first gear with it. On the upside the rzr was awesome out there but now need some hop up parts for that.

interested in the set of fullbores pm me price shipped to 48312 Thanx Aaron

i'll be out there on my banshee but bringing the rzr incase the banshee only runs for 20 mins again buddies will have banshee raptor and a yfz450. Staying at silver hills

pm sent

Looking for a set of 21x12x8 skat trak extremes on rims for banshee.

Also have fireball racing round carrier was mounted up but never ran with brake plate. HAve rear brake setup minus brake line and needs pads and brake off plate. Stock radiator with hoses and overflow bottle. WOuld take trades for yfz450 aftermarket parts or wheels and tires for my 08 silverado like 33-35" for 18-20" wheels.

I have a 99 frame with clear michigan title. 250 obo Motor with brand new crank trued and welded, tyson drag port, fresh 20 bore with new pistons, new clutch, stock basket, stock tranny, milled head, 34mm keihins with intakes never been started. 1500 obo Stock a-arms with tie rods, spindles, hubs, brake calipers and lines. 250 obo Also have other stuff let me know Located in Utica mi

Utica Here

Looking for a front set of marvin shaws and a round style bearing carrier.

looking to trade a set of 20x10x10 skat trak hauler extremes 8 paddles mounted on douglas blue labels like new only sed 2 times. Lookin for a set of 21x12x8 10 paddle haulers on rims.

Not sure how to edit. I am located in michigan but travel to cleveland weekly so if needed to meet somewhere along the way could do that. I don't know how to post pictures but pm me your e-mail and I can send them to you. I will take 100 obo for everything.

I need a set of intakes for 34mm carbs, wiring harness w/CDI box and coil and a round housing bearing carrier for stock axel. thanks

I have a complete set of stock pipes only a few hours on them. Stock swing arm with carrier and skid plate, stock tors system and e-brake cable. All of a 05 Banshee, all in good working order. Make me an offer, need gone. PM me for pics. Thanks.

I have a blue seat looking to trade for a black one. My seat is in mint condition.

Looking for a set of jugs with stock bore but with a nice aggressinve/dune port job with pistons and rings. Also looking for a head if stock has to be milled or and aftermarket head. Also need intakes for 34mm carbs.

can you send pics of the pipes to [email protected]?

pm sent also can you send me the pictures? [email protected]

send pics [email protected] does it come with gear shifter and kick starter?

I am going to be building a banshee and am just wondering that if I buy a frame does it need to have a title if it has a clear vin #?