330 R killer

Soak the black looking one's.

It was my water pump seal.

I fixed it sat morning, thanks all all the imput guys.

I have the same head, nope can't say i ever have..

:biggrin: :biggrin: :biggrin: That shit was fun 20hp is alot, Fu*k that pulled hard in 3 and 4th..just a little me tuning and i think i got it..thanks guys for all your help.

Ok here are my mods....Bored to 66 mm full race port,timing plate + 4 36 mm carbs, alba carb spacers, V Force 3 reeds, Ture and welded crank, Chariont head with 19 cc domes. and T5's I have been running and turning street bikes with nos for years Easy, just was not sure about 2 strokes..the kit is a dry system i drilled it into my carbs to put the nozele upped the jets from 310 to 340 going to go for a ride right now down the street and spray it let you know what happens in about 10 min..hope i am not pusheing it back lol wish me luck and my timing is set at -3 right now

My stock one has a grove just like that, good question,if u have that grove should we replace the whole impellor?

Ok so my timing is at plus 5 right now, so your saying with a 20 shot i should start at -2 on my timing?

Ok cool thank you.

SHIT I POSTED UNDER WRONG TOPIC SORRY!!!!!!!!!!!!!!!!!!!!!!!!!!!!

I FUCKED UP I JUST POSTED UNDER IMAGES...Ok here is my Question. I hooked up my old Nos kit from my street bike to my shee, The shot is going to be a 20 shot, What should my timing be at? -5?? or is that to much? Has anyone on here ever run nos a shee? i have run nos on my srteet bikes for years with no problem at all, can somone help me with the timing.. Thanks

Hey Guys. I just hook up my old NOS kit off my street bike to my shee, going to run a 20 shot, My Question is what should i do with my timing -5 or is that to much, Has anyone one on here run nos on a shee, I have run it for years on my street bike with no problems..So if u can help me out on the timing that would be great.. Thanks

Do any think it could be my o ring on my cool head leaking, would that cause coolant to get into my tranny oil??????

OK i checked myy water pump seal and it i good so it looks like? why else would it be leaking into my oil?? And there is no groove in to stock water pump shaft.

Thanks guy's i will try it in the morning i hope that is the problem..

ye send me some pics please, no the are not blue and black at all...

i drag my bike has around 70 hp full drag port cool head 18cc domes 36 mm carbs bored 66mm..i have it tore apart right now what seal r u talking about i do not see one, i can not tell if my clutch is bad or good do not know what i am looking for

what would couse that?? gasket looked good.

Noone knows why it is milky??? i am lost here

Hey guys, i think i smoked my clucth bike will not pull up hill but it revs like a son of a bitch and what would be the best clutch?,and my tranny oil is milky, i know that not good why is it milky?? and sells like like shit too..

No it has not, put on a new chain and front and rear spockets in sep just starting leaking a few weeks ago..

Thanks you for your help Guys going to replace it this week..

Hey guys,can someone tell me why my tranny oil is leaking out of my front sprocket.. Is there a gasket in there???

were r u guys doing to do with of gecko of wash??and how much are tickets?

i can give u 55 and send u a call tag tomorrow..pm me now