330 R killer

Soak the black looking one's.

It was my water pump seal.

I fixed it sat morning, thanks all all the imput guys.

I have the same head, nope can't say i ever have..

:biggrin: :biggrin: :biggrin: That shit was fun 20hp is alot, Fu*k that pulled hard in 3 and 4th..just a little me tuning and i think i got it..thanks guys for all your help.

Ok here are my mods....Bored to 66 mm full race port,timing plate + 4 36 mm carbs, alba carb spacers, V Force 3 reeds, Ture and welded crank, Chariont head with 19 cc domes. and T5's I have been running and turning street bikes with nos for years Easy, just was not sure about 2 strokes..the kit is a dry system i drilled it into my carbs to put the nozele upped the jets from 310 to 340 going to go for a ride right now down the street and spray it let you know what happens in about 10 min..hope i am not pusheing it back lol wish me luck and my timing is set at -3 right now

My stock one has a grove just like that, good question,if u have that grove should we replace the whole impellor?

Ok so my timing is at plus 5 right now, so your saying with a 20 shot i should start at -2 on my timing?

Ok cool thank you.

SHIT I POSTED UNDER WRONG TOPIC SORRY!!!!!!!!!!!!!!!!!!!!!!!!!!!!

I FUCKED UP I JUST POSTED UNDER IMAGES...Ok here is my Question. I hooked up my old Nos kit from my street bike to my shee, The shot is going to be a 20 shot, What should my timing be at? -5?? or is that to much? Has anyone on here ever run nos a shee? i have run nos on my srteet bikes for years with no problem at all, can somone help me with the timing.. Thanks

Hey Guys. I just hook up my old NOS kit off my street bike to my shee, going to run a 20 shot, My Question is what should i do with my timing -5 or is that to much, Has anyone one on here run nos on a shee, I have run it for years on my street bike with no problems..So if u can help me out on the timing that would be great.. Thanks

Do any think it could be my o ring on my cool head leaking, would that cause coolant to get into my tranny oil??????

OK i checked myy water pump seal and it i good so it looks like? why else would it be leaking into my oil?? And there is no groove in to stock water pump shaft.

Thanks guy's i will try it in the morning i hope that is the problem..