X53Gunner

Well I figured out what was messing me up. I thought they were supposed to go in the hole right next to the main but the jets that they sold me wouldn't fit up in that hole and that was screwing me up! I took out the idle jets up in there and they are a bunch smaller than what they sold me. The ones they sold me are longer and have pin holes along the shaft, nothing like the stock ones. I'll have to return them tomorrow and see whats up. Scott

Ok thanks guys!!! I will invest in one of those books also. Where is the best place to get one? Scott

So I don't have to remove the floats then? I thought they might be hiding under there? Scott

I know where the main jet is but were is the damn idle jet located in the stock carb. Trying to rejet but stuck until I find that crappin idle jet loctaion. I know this is probably a stupid question but hell you have to start from some where learning. Scott

Thanks guys!

I have an 02 banshee, I just installed fmf fatty's and powercore II silencers. I have a K&N air filter in the stock air-box with the front removed for better airflow. I live at 800 feet elevation. What main and pilot would you start with for normal summer time ridding? If I want to take it out when its colder I will then just bump up a couple jet sizes. Also what would be a good starting point for my airscrews. Thanks for the help!!!!!! Scott

Cool thanks for the quick response!!!!!!!!! I"m off for my set of SandStars Scott

I'm heading out in about a half an hour to get some paddles off a guy. They were bolted on a raptor I'm guessing they should fit on the banshee hubs correct? Thanks for your help guys!!!!! Scott

Ok guys just throwing a question out there. A friend of mine and I work togather and were talking about taking a weeks vacation this coming year. I'm looking for some bad ass dunes with in a day or two drive from MI We would be taking our quads and also our roadbikes to mix it up some. Let me know where you would head to? Thanks! Scott

If possible I would like pictures of the PTR's. I just want to make sure they are the mids. Thanks again for your time! Scott

I was looking for FMF Fattys as I would like to get more power in low to mids. From what I thought the T-5's and Pual Turners where mid to high. I also know there alot more expensive then FMF. Scott

Looking for a nice set of FMF Fatty Pipes and power core II Silencers. Pics would be great! Thanks for your time! Scott

Thanks for all the input guys!!!! Scott

I live in Greenville MI how much would you take for the T-5s if I picked up today?

Ok thanks guys!!!! One more quick question, should I just get the same size paddles as my stock tires or would you get a differn't size set up thanks again for your help!! Scott