Budd

You have carriers too ?

I dont know what my compression is, Im goin to call Trinity Racing this week since they did the porting, and Im running their head to see what they think. I currently have 20 cc domes but am thinking about steppin it down to 18s since im running race gas now.

Just picked up the jugs and pistons. Cylinders wernt bad, but he gave them a fresh hoan, and the rings were toast. Now to tear the rest of the bike apart for a complete rebuild. Cant wait!!!!!!

What did you pay for the rockets and what did you sell the T5's for? Im thinking about making this change also

Removed the jugs and pistons. Rings are glued to the pistons. Guess the race gas gummed up from sitting. Im still goin to take them to the machine shop since its this far apart just to make sure all the clearances are up to spec and to see if the rings are good. Ill let you know how it turns out.

Ok cool. I figured it had to be something stupid. I did leave racegas/91 mix in there for almost a year. I might just take the jugs and pistons down as well just to get them checked before i re assemble. What would you recommend for carbs? Im thnkin abou gettin some 33's or 35's and a set of billet intakes

SO basically just remove the jugs and clean the rings on the pistons and re assemble? Your thinking th erings got glued to the pistion and thats why there is a loss of compression?

I pulled the plugs 1 by 1 and put my thumb in the spark plug hole, the compression was weak. I out brand new top in 2 years ago and only have a few rides on it. Im goin to pull the jugs and pistons and take them to the machine shop. See what he has to say.

Yea. Super weird. It poped a few times like it was goin to start then i noticed i could kick it over by hand. My guess is the rings collapsed or one cracked or something. Ill have to check them out when i get the jugs off.

Well my bike has been sitting for a year or so and when i went to fire it up there was no compression. Pulled the head off and checked the cylinders, they feel smooth, rings must have taken a shit. My question is, while I have it apart should I just throw a set of rings in it or do a big bore of some sort? I dont want to spend more than 1k or so. Its already got Trinity stage 3 porting, trinity head with 20cc domes, toomey t 5 pipes, and v force 3 reeds and cages. Let me know how I should proceed.

Well Im running out of time before Thanksgiving and the deal on the yellow plastic fell through. He ended up refunding my payment. So The Banshee Will go to pismo this year lookin like this

Ouch! Tough crowd around here! lol It doesnt look that bad. I like the rear plastic, the front is just a little different. Im sure it will look better once the seat is on and the new wheels and tires are on.

Looks clean!

Thanks. Im doin a full makeover on her soon. Picked up some yellow fullbore plastic. Going to powder the frame black with gold flake in the clear. Should turn out good.

Had some free time and I just couldnt resist! These things are amazing, really look nice on the bike.

Here you go, They were expensive when they came out. Billet wheels, the ones you listed were cast http://www.speedsupplies.com/accessorylistingdetailpurch.asp?item=38923

Got them all mounted on the wheels. Hope to throw 2 on this weekend just to see how it looks. Then the teardown and transformation begins!

You can buy wheels still from douglas or hiper. But they are expensive. And ITP and Douglas still make sand tires for 12 inch wheels

Good luck finding these. Ive been waiting over a year for a set to pop up. Guess ITP stopped making them a few years ago. The wheels retailed for over $600 bucks says the guy I got them from. I picked them up for $330 shipped to my house. You can get the tires all day long on ebay. I got mine for less than $100 bucks for all 4. Keep your eyes peeled on ebay, you can get great deals sometimes.

All 4 wheels weigh 30lbs. I dont know how much the tires weigh but Im willing to sacrifice weight for the Bling Factor! lol

Yeah, they are pretty nice. Only thing I wish is they were wider. They are only 7 inches wide, I wish they were 8's or 10's. But oh well. Should look sweet mounted on the bike. Im hoping to get time to mount the other 3 today. It only took me about 5 min to get that one mounted.

Got a rear mounted up!

Got a rear mounted up

Thanks! But trust me you will like the new and improved!

Sort of, ITP made a set a few years back. Way too expensiver so I dont think they sold many. I just picked up the pieces off of ebay and got a completes set for under $400 bucks. Here are a couple pics of bikes with 12 inch kits. I have the magnum wheels with sandstars. So a mix of both. Rims of the first and tiires on the second. Cant wait to get them mounted up.