banshee4201

I am looking for a 10 mil cub, complete engine, just wondering whats out there, Thanks.

i got a 400 68mm cub fully drag ported, 5mm long rod crank, trinity head, 18cc domes, trinity intakes, 38mm keihns, out of frame cpi's with silencers, dynatek cdi. I was just wondering exactly how do i get the port timing just right, and what should it be and how do i check it. just looking for just a little more power out of this motor. i'm running 50/50 110,93 and my squish is about 65 thou. i know thats off. It runs great just wanted to get the port timing rite, Thanks.

i have a complete 400cc engine. It has a long rod crank, 68mm bore cub cylinders fully drag ported by trinity racing, trinity intakes, trinity stage iv head, brand new trinity racing clutch with heavy duty springs, will sell the carbs seperate, keihn 35 pwks with k&n filters and outerwears. The top end is new with about three hours on it. Freshly nikasiled cylinders, new wiseco pistion, rings, circlips and wristpin bearings. Will sell the motor with carbs for 1650.00 or without the carbs for 1400. Will sell the carbs seperate for 240.00 Any questions call at (252) 725-4475 http://i256.photobucket.com/albums/hh171/t...newpics3030.jpg http://i256.photobucket.com/albums/hh171/t...newpics3031.jpg http://i256.photobucket.com/albums/hh171/t...newpics3033.jpg http://i256.photobucket.com/albums/hh171/t...97/198d7476.jpg http://i256.photobucket.com/albums/hh171/t...newpics3028.jpg http://i256.photobucket.com/albums/hh171/t...97/c97161fc.jpg

i was just wondering do you polish the steel parts on my banshee the same as the aluminum ones or is there different steps? thanks for any info

I am lokking for a 6 over swingarm. I like the aerotube and artermarket carrier. Thanks guys

just post some pics when u get a chance and we'll go from there.

here are some links to some better pics. http://i256.photobucket.com/albums/hh171/t.../newpics284.jpg http://i256.photobucket.com/albums/hh171/t.../newpics285.jpg http://i256.photobucket.com/albums/hh171/t.../newpics301.jpg

[attachmen t=14658:new_pics_284.JPG]these are a set of inframes with about 6 hours on them. i'm selling them because i want some outta frame drag pipes. the silencers have been polished and they are in great shape. theses pipes have one ding on the right pipe down at the bottom where the tab sticks off the frame, other than that they are in great shape. i am asking 470.00 shipped but i do accept offers. u can give me a call at 252 725-4475. i have another post but cant figure out how to get the pics. up there so here they are....

i've got a set that i would let go for about 425.00 plus shipping. they r chrome and i would rate them about 8.5 of 10.

i have a set of cpi inframes, send me ur email adress and i'll send some pics.

i have a set of cpi inframe drag pipes with about 6 or 7 hours on them and i want some out of frame drag pipes. i will get some pics up tom. any questions just call 252 725-4475

yea everythinga negotiable here in norht carolina even the girl...........lol

can u post some pics for me to see. and what all has been done to ur bike. and oh yea yall like the little video thanks.

i am in north carolina. i would like a 4mil or something of that sort.

<a href="http://s256.photobucket.com/albums/hh171/tylerray97/?action=view&current=Justinspics031.jpg" target="_blank"><img src= "http://i256.photobucket.com/albums/hh171/tylerray97/Justinspics031.jpg" border="0" alt="jason's 450 R"></a>here are some pic links..

i got a 07 honda 450R, its got a curtis sparks cam, its been ported and polished with a 5 angle valve job by white knuckle racing, it also has a full rossier exhaust, a boyesen quick shot accelerator pump cover, a K&N air filter, a 13:5 to 1 JE piston, dyna tek ignition. the motor has about 6 hours on it since it was put back together. its got blingstar nerf bars and front bumper, its got various parts powdercoated. it has holeshot's on the front and 501's on the back. anything else u wanna know just ask....

i was just wondering if the arms of a yfz 450 will work on my banshee? thanks for ur comments...

i was just wondering if yfz a arms will work on the banshee as well

i could have traded u my dual setup, 35's PWks, trinity intakes, stainless braided cable. u could give me a call at (252) 725-4475

i have 68mm cub cylinders with a full race port, in frame CPIs with 2 k & n's adj timing plate at 6 deg. i am at sea level and cant seem to get the jetting rite. i put new plugs in ran them wide open and it looks like they r still super clean, it also feels like it dont want to pull sixth gear, im running 16/41. i've got a 150 main and 48 pilot stock needle that came in the keihn 35's the clip is in the middle?