RustyHook07

interested in front and rear shocks .I'm assuming thats shipped.Do you have a kick start by chance?

Are your cables for twist throttle?Would you consider selling cables and intake together and if you have good air filters?

Well you may as well PM me you address so I can get you a money order and finish up your post.

Thank for the input.Swinger bearings are 3 weekend rides old,4 carrier bearings(Lonestar carrier) are about 10 rides old.Switched my 13t back to 14 because 13 makes 1st gear useless.The good used srocket hub I bought off HQ is now fucked in 3 rides just like the one it replaced.I'm going to have to buy a quality hub and just buy $33 chains.Heading to Daraques park(however it's spelled)in 2 weeks so If Motosports don't get my sprocket I will just buy 2 $33 chains and run with it.

I am having the same problem.I tear up chains like a bastard and am done buying o-ring chains cause they're expensive and they aren't going to last no matter what I buy.I run 22" tires but just got a kick ass deal on some 18" so I was going to go to a 39T to get some of my top end back and get some use of all my useless chains.Ordered the 39 and they got the wrong one.Still waiting for them to tell me whats going on on their end but I could keep you posted on my end and maybe we will help each other.

Could you post a picture of the air filters and tell me what brand the filters and manifolds are?Thanks

Do you still have the wheel hubs?

looking for REAR CALIPER & MOUNT/ROTOR HUB with ROTOR/SPROCKET HUB Im only looking for hubs with GOOD-TIGHT SPLINES and little to no seal grooving/a rotor & caliper in good condition not trying to be a picky bitch but I dont want questionable parts thanks

do the front tires leak?they look real worn down.i was also wondering where your located

YOU GET THE IDEA DRIBBLE DICK

I HAVE A 93 NOT THAT IT MATTERS;I MAY HAVE TO SELL IT TO HELP WITH DOWN PAYMENT AND THE SPINES IN MY SRPOCKET HUB ARE ABOUT WIPED OUT AND REAR CALIPER IS LOOSE ON PIN.WITH A PAIR OF HUBS & CALIPER & ROTOR IT WILL BE MECHANICLY PERFECT.LET ME KNOW WHAT YOU HAVE OR PLEASE HELP DIRECT ME IN THE RIGHT DIRECTION.WHEATHER ISELL IT OR KEEP IT IM ONLY LOOKING FOR PARTS IN GOOD TO PERFECT CONDITION.THANK YOU

I live in Wisconsin and would like to at least like to hit some radar runs this winter.If any one would part with these bastards at a reasonable price let me know.I usually buy all my stuff new but with christmas coming Im F'ed

I am interested in your turf tamers.What size? on rims?How much wear?Have they had studs?Could you please post a picture?THANK YOU

[quote name='HULKAMANIA' date='Aug 12 2008, 10:27 AM' post='85617 i have 34 pj's i was going to post tonight.i bought them 3 years ago and have been in a box ever since.i'll sell them for $275 shipped.i cant get the pictures small enough to fit from this laptop but if your interested ill send from other computer.i don't have cables,filters,or manifolds though(thats wy i never put them on)

interested!

no tors/fairly new ricky stator..im bring home the fluke tonight

sparks on 1 or 2 first kicks then nothing /same w/ 2 good coils.ran new coil wires from cdi & jumped neg side of coil to ground/im thinking cdi but would like to see if anyone is famaliar w/ this

yes ,the pivot bolt is seized in the bearing tube so take a cut off wheel and saw the fucker off /if you are careful and cut on the veryedge of the cup you wont damage anything you didnt have to/be sure to use jack stands and support everything that needs to be/not taking a shot at your skill level or common sense but this country is full dumb fucks/use a lot of anti-seize on bolt when installing

yes ,the pivot bolt is seized in the bearing tube so take a cut off wheel and saw the fucker off /if you are careful and cut on the veryedge of the cup you wont damage anything you didnt have to/be sure to use jack stands and support everything that needs to be/not taking a shot at your skill level or common sense but this country is full dumb fucks/use a lot of anti-seize on bolt when installing

for stock a-arms/if so send pic-what weight rider

I may need your pivot bolt /I bought a stock swingarm from another guy who said I was getting pivot bolt w/ it but he didnt send it (I only paid 40 shipped so Im not going to cry about it)I ONLY HAVE 6 DAYS TO GET THIS FUCKER DONE ;so is there a FASTER WAY to pay you like pay pal or something . I dont think theres time to send a money order then wait and rely on our mail system /please let me know

im not a truck driver so i dont need a naked lady grill/but will you sell the v3s and if so how much

i have 34pj carbs /if interested we can trade pictures