#1JUANstunna

DO NOT use starting fluid on 2 strokes! PERIOD. If you want to "cheat" is squirt a little pre mix in,not starting fluid.

I'd deliver it to you big boi! Sent by me FFS from Tapacrap

What you see is what you get. 36.6 lbs. Shaws were rebuilt and powder coated black in the summer of 2015 and never ridden. $1545 that was the purchase price without the rebuild and PC, so that's what I want out of it. Shipping extra but prefer local pickup due to my busy work schedule and no greyhound terminal close. Located in Lynn, in. Sent by me FFS from Tapacrap

How bout you put them on ebay for a .99 auction.

Well I don't need them now. Sent by me FFS from Tapacrap

So you'll ship these to Indiana right? Sent by me FFS from Tapacrap

FFS JD! Hummer is going to kick you in the dick

STFU and before I send Skeet to take care of your ass

You are obviously dumber than fuck.

BUMP! I finally found the neutral switch cover and installed it. Its an aluminum Mattoon.

Time to post pics of hot chick and hotter chick. Let us be the judge of who's who.

Bitches be cray cray!

Fuckin shit what the hell did I miss?

MMAxtreme Machining coming soon!

Pretty much

None

I'm going to sell my 421 cub that is completely fresh. The engine has only been heat cycled. No ignition, carbs or pipes. It's been drag ported and BansheeHP cleaned it up some more adding pink power bands. It's been freshly plated. BHP assembled it. Driveline domes (Super secret BHP special cuts) Cool head New wiseco pistons Vito's 4 mil long rod crank with max load and tz bearing V Force 2 reeds UPP intakes for 38mm carbs Redline cut 2-5 override Redline straight cuts Aftermarket clutch basket ( I can't remember the brand) Driveline clutch and pancake bearing Lock up and cover This was set up for alky. The bottom case was welded and I've ran these cases for 6 years or so. You can see some jb weld around the shift shaft also. It was there when I got the cases and been fine. $2500 plus shipping and fees. Only trades I will accept will be Paypal, or 25 of my favorite dead presidents, Benny Franklin. Once payment is made it will take a couple of days to get ready to ship. I will have to remove the ignition and build a lil crate. No i'm not going to waste my time doing that before the sale if I'm going to end up keeping it. I don't have to sell this. I will not part this out so if you ask and get a fuck off, don't be offended.

To help a little more with what BHP said, click the link. http://www.cpindinc.com/pub/part_list?manufacturer=3 then click the "More Info" tab to get the measurements he was speaking off.

That comes out to 41.275mm so I'd say they are 44mm spigots.

Yes I have two pair and the od is different on both. Sent by me FFS from Tapacrap

What is the OD on the intake side? TM 38's come in two different sizes

JB Weld and sand paper and it's good as new. Sent by me FFS from Tapacrap

My offer still stands. Bump for a homo.

Come on Debbie Downer, jd is just trying to have an opportunity to sell more parts in the future. Sent by me FFS from Tapacrap

JEW!