jeffrey

where in wv r u located

how bout some offers?i really need a fuel eff vehicle i need to sell or trade for a fuel eff vehicle perferabley a truck but anything possible

i need a coolhead perferably 19cc domes 4mm stroke but any will do i need aftermarket shocks elka perferably 34 or 35 mm carbs

is your gear oil low? how new is the engine? u said its burning a lillte more smoke then u would think maybe the trans oil is getting into the crankcase and banshees use that area and require its sealed

i would trade can u send some pics? to [email protected]

and a clean title

its true its all in the gearing if he had another 100 feet he was gaining fast

i really had fun over the weekend i have a 96 banshee 65 mm bore and stock stroke with jetted carbs and dmc916 pipes well my main bike was down i am doing a freshen up(main bike is a stroked shee with 65 mm and dmc pipes v force reeds so on and so on) so this is a bike i ws trying to sell i decided to ride it let everone see how it runs i lined it up with my buddies 4mm stroked banshee note in the stock banshee the gearing is 12 41 with 18 inch tires our first run i beat him hard but in his favor he did miss a gear but i dropped it in 3rd gear easily our 2nd run i decided to drop it in 4th and wow every time we raced it was by at least a bike i was surprised his feelings was hurt

pm sent

i forgot to mention it also has a new clutch and new axel bearings and seals holeshot tires protaper bars and a emglo unbrerakable shifter

lowest is 800

bump

this is a 96 banshee stock stroke with dmc 916 pipes and a new wisce crank and about 7 hours on rebuild has custom professional painted plastics it also has a new clutch amd more give me an email addy and ill send pics

hello i have a banshee for trade will u send pics to [email protected]

noone interested i will take 800 i just need to get some money back so i can get my new cyl

hey guys i have a jetting question i have a 4mm stroker with 66 mm bore dmc exaust (916) stock carbs k&n filter open top airbox timing advanced 4 degrees live in va where our elevation is around 550 ft average temp is 73 can someone please give me a baseline on where to jet the stock carbs

u can email me at [email protected]

it is stock stroke and its 65mm wich is what cubs smallest size

the pistons have no wear on them either arent even discolored at all no scars or scratches

these are a set of cub cyl used 3 hours and im going with a bigger stroke so im selling these for the cub stroker they have 3 hours on them not even a full tank of fuel with oil mixture 26.1 if inteerested u can pm me and ill give u my number

im intersted also send pics to [email protected]

i already had the cub cyl and i already had the 4mm stroked engine now im going to combine them to make the stroker cub i was curios if anyone had any thoughts

wow they really put a turbo on a busa wat the hell as if they needed that i was looking for a used busa 6 monthes ago and found only 1 that hasnt beened downed somehow and the only 1 had only 600 miles on it

i have dmc 916 pipes and k n filter and can i use the spacer plate like i did on the stock heads?