98_banshee_newbie

Ok guys I need a good place to start for my jetting. I am roughly around 700ft above sea level I have noss head with 21cc domes,2 n 1 33mm carb,toomey 6's, 40:1 mix ratio. Where do you guys think a good start would be. I have never ran a 2 n1 before.

R U talking about the little flat rectangle piece that keeps the slide going up and down. If so I had the same problem that it would keep getting pushed out so that the carb slid would spin and not go down all the way . So when you start your shee up its roaring. If it's that that piece cannot be replaced I checkededat the yammy shop they told me to adjust it right so the slide goes up and down good with out catching but yet not able to spin. Then takesome Jb weld and put in around the out side of that piiece on the exterior of the carb just to make sure that it does not come out. Because like i said that small little brass piece can't be replaced unless you get real lucky or another carb. Hopefully that's what you are talking about.

I just bought the carbon tech's petals

Welcome and the one thing that helped me out the most was the clymers manual a must for any banshee. The best 20-30 bucks you can buy in all seriousness this will help you out a lot when putting this thing together.

I figured reporting that he was using banshee in his title when it is not one get his auction cancelled. That will teach him to talk shit. If anythinmg it will take him a little longer now to sell that piece of shit. Another victory for the banshee world.

I have an idea what if ebay makes him cancel his thing because according to ebay rules he is not allowed to put not baanshee in his title. It is against there policy because if i am searching for banshee why would I want this jack off to pop up. Since he diss's banshees lets see If I can shut him down. Kind of like a banshee would if they raced.

You got a point people either like the 2 n 1's or don't I will find out soon enough

I hae a stock head and stockcarbs with tors removed and almost anything you could think of for a warrior motor pm me and stock shee reeds

That alright i will be purchasing one in a few so if you come across one or have a way to trade that one out let me know.

I just bought a brand new 2 into 1 intake only for 72 bucks shipped on ebay. What do you guys think good deal or bad?

If you had the black one that they sell I would buy it in a heart beat

I would buy it in a heart beat yup sure would

bought everything that I want for now thanks guys

found one thanks guys

went ahead and bought the carbon

I took the jugs off and there are no scratches ar anything really smooth actually. But I am pretty sure that it is running rich because I didn't reaize that I had to check the jetting after switching mix ratios.

I just did a compression chech and I am at 110 on each cylinder stock shee with t6's and about 700-800 above sea level. What do you guys think.

pm sent

If I had carbon petals and then later on bought some VF3's would I even notice that much of a difference.

I have a question money wise what s the bestto get vs. power gains VF3's vs. Carbon petals vs. boyesen power reeds I ave a stock 98 with T6's and a 34 mm 2 into 1 coming.

I have a question money wise what s the bestto get vs. power gains VF3's vs. Carbon petals vs. boyesen power reeds I ave a stock 98 with T6's and a 34 mm 2 into 1 coming.

Hey guys I am look long for a good deal on a cool head of some sort hit me up

that sounds fun

If I am not mistaking about a month or so when I went it was 20 bucks to ride ans an extra 10 bucks for the mx track. And I think the flacgs for the average ones were like 14 bucks. And that was during a week day I bet they are packed this weekend. How is haspin acres ? I have not been there yet.

Like the titles says got a good price I got the money. Let me know