thdog3

get a hold of motion pro directly or a mp dealer. i would think a blaster cable might work also.good luck

hello everyone, i have a 2000 mild port,stock carbs,k&n,lid w/o snorkel,vforce 2 pro circuits.i recently sold my woods bike and wanted to tune my banshee for woods riding(1-3 gear stuff).i bought a dynoport 2-1 pipe and i stumbled across a 34mm pj keihin carb in my garage.is it worth all the trouble tuning the single carb?from the searches i did i've found that the 34mm pj is difficult to tune.am i wasting my time with this?should i just run the pipe and stock carbs.any input would be greatly appreciated. thanks thdog3

a friend of mine had similiar problems with the hard starting and it turned out the carbs were way out of sync from the factory.didnt notice it in stock trim but when pipes were added it exploited the problem.personally ive run with the lid on no snorkel of course,k&n,pro circuits 310 mains stock pilots,stock clip pos(center i believe)with great sucess.adjust the air screw by moving 1/4 turn at a time until it runs the best.start at a 1/2 turn out change 1/4 or 1/8 turn out until you get it where it has best throttle response.

looking to buy a 2-into-1 exhaust set-up.looking for pipe and silencer but i would buy just the head pipe if its out there.

do you still have that pipe?

i didnt recieve your e-mail or pm.

is the pipe still available? if so could you e-mail pics to [email protected]