tooez

I run benol in all my quads and my bike. I run 32:1. but I also run 110 octane race fuel. Love the smell of race fuel and benol. Mine are are bone stock. Except for fmf pipes. Benol recommend's 32:1 in all 2 stroke's. Even in the carts. Some people don't like it. I have run it for over 20 years and won't run nothing else. Here's some info. BENOL CHARACTERISTICS: BeNol has a 25% greater film strength, higher load carrying capacity, and reduced varnishing properties than the lower grade AA castors. Smoke Rating: 4-5 1=Fog 10=No Smoke Clean Burn: 3-5 1=Heavy Deposits 10=No Carbon Film Strength: 10 1=Failure 10=Virtually No Wear Viscosity @ 100 F 950 - 1000 SUS 50W @ 40 C: 220cSt Pour Point: 0 F Flash Point: 520 F Rust Prevention: Contains rust inhibitors Certification: A.P.I. S.A. Intended for Racing Engines Biodegradability: 100% http://www.klotzlube.com/ http://klotzlube.com/storeProdDetails.asp?pi=6 Thanks EZ

I got a 89 frame on ebay. 49.00 start bid no reserve. Buy it now $80. thanks EZ http://cgi.ebay.com/ebaymotors/ws/eBayISAP...273362&rd=1

No not mine. I would strip it. lol

Won't you guy's get off my bike. I was drunk and forgot what bike I was working on. To each is own.

Send pictures to [email protected] Thanks ez

You take paypal. Can I pick it up saturday.

30 If sent you mine.

Man sorry to here shit like that. Pm your email address and I will send you some pic's of a axle and swinger. Thanks EZ

Almost everything is on ebay. I will be listing more tomorrow. http://search.ebay.com/_W0QQsassZred90corvette For the ones sending the m/o. I have them boxed and ready. thanks EZ

These are mine. I will ship if you win. Just pay actual shipping. thanks ez http://cgi.ebay.com/ebaymotors/ws/eBayISAP...E:IT&ih=016 http://cgi.ebay.com/ebaymotors/ws/eBayISAP...E:IT&ih=016

Get a set of toomy's or fmf fattys, I had a set and they rub the pegcock on the Gas tank.

No mods. Bone stock. Fmf fatty pipes. Rejetted to 260. elevationis 1100. stock air box. thanks ez

I put some fmf pipes on my bike. I rejetted the carbs with 260 jet. quad is bone stock. For some reason it idles way to high. I don't know much about carbs. I just don't want to turn screws that I don't know what they exactly do. Do I need to change the needle or rejet the pilot jet. Thanks ez

25 shipped I get picture tomorrow

I got them with rims hubs.

J-arms (pending) rear carrier (pending) stem (pending) Jugs 1 jugs 2 jugs 3 jugs 4 Stock reeds cage's and boyens reeds in very good shape, Carb boots 25 shipped Reeds part 2

Here's some picture's of some of the stuff. Click on parts list to see pic's. Rear carrier $25 shipped (needs bearings) Rear shock 50 shipped Front shocks 50 shipped Complete Front break's (Part one) 60 shipped Complete front break's (part 2) 60 shipped Complete rear break's 75 shipped. Front rims 75 shipped

jugs 150 (no pistons) shipped motor 250 Bad rod frame 75 rear hubs 25 shipped front hubs 25 shipped carbs 50 pipes 75 Dg Pipes and silencers plastic 75 caliper rear 75 shipped front caliper 40 gas tant 10 seat 25 throtle 15 shipped axle 65 shipped tires 100 tires 75 a arm 50 shipped rear shock 50 shipped front shocks 50 shipped kick starter 40 rear spocket 20 rad 30 swayarm 30 head lights 40shipped j-arm (chase) Spindles 25 shipped If you guys want pictures just pm me your email and I will send them. I will be taring it down today and getting pictures. I have more to list. Just give me some time to check the parts out and I will list.

pic of tire

I think rims would clean up nice. The tires are like new. Here's a pic of rim and tire. Is 150 shipped out of line.

This quad is complete. I'm taking it apart today and l will be pricing it. look at it and let me know what you need. I'm in tn. 38501 If you want phone number, just pm me.

Being a kx250 and kx500 rider. I would love to have that kind of raw power in a banshee frame. I have always wanted to put one on a tecate 250 four wheeler.

I'm getting ready to build my motor. Just need some info. (And yes I have read alot of post) Quad is for mx and woods. When doing a 4mill stroker do I need to have the jugs ported for it to run correctly. Will I need to change carbs from stock. Is it any advantage to have a 2 to 1 carb setup. (Other than having only one carb to adjust.) Thanks EZ

Answer to question's It's not true about blowing up. If you rebuild it just make sure that the pistons are match to the jug. Who ever does the jugs should have the pistons to match the bore and hone ouf each jug. The t5rans is basicly the same as a 4 stroke. It the trans is in the motor. Trans oil and motor oil is the same just like a 4 stroke. You got to mix gas for 2 strokes. I mix mine 32 to 1. 16oz's of oil to 4 gallons of gas.

Just make sure that your first ride on a shee. Make sure it its been taking good care of. I bought my first shee 2 months ago and was out buying another one a month later, I liked it that much. The more you spend on parts and make faster. the more you want to do. In the last 2 months I have learned more about a shee than any other quads in my life. (thanks BansheeHQ)4 strokes are torque. 2 strokes are raw power.