dunerman

Works G Series with triple rate springs. Works shocks are for a rider weight195# +2 a-arm type, $385 plus shipping

Hey Guys, Sorry I havent got back to any of you, Holidays are crazy..... I have been keeping all of the PM's I get in a folder to contact any of you that want stuff if I decide to part this thing. I would rather not since I just spent 3 months building it. and have prolly 100 hours in all of the fab work in the frame and suspension. I havent got enough people interested to part yet . I still need the motor and chassis gone if I did. I do have it on Ebay and will take $6500 for it. I will post if I do decide to part but I am going to give it a little more time to try to sell it together. I am not in as big a hurry to sell now because I bought my new bike and I dont need the money as bad. Later SEE MY AUCTION E-BAY CLICK ME

No, Its not stock. Its all 4130 chromoly. I used a few stock tabs for the rear shock and foot pegs and the gusset for the steering hopp but thats it. I have pictures before it was coated if you need to see them . I will say this frame was instired but the built you posted. It is your design for the front end . I liked it alot thanks

I have a lockup $300 shipped it is a direct drive cover

ebay

$6999.00 need to sell best price I can do

All prices do not include shipping.

CHASSIS $2200 2008 built custom 4130 chromoly +2 stretch frame (This is a Custom frame NOT stock a modded frame) .065 wall with baja style front suspension Custom +1.5" 4130 chromoly antivibe stem Custom +2 +0 4130 chromoly a-arms 0.95 lowers and .065 uppers $275 (like new)Custom 4130 chromoly +4 swingarm .095 wall $100 (like new) Polished JJandA 40mm carrier $550 (like new) JJandA billet play axle with Billet hubs and sprocket and brake assembly $60 (rebuilt) YFZ450 twin piston rear caliper $25 (like new) Stainless braided rear brakeline $75 (clean) Polished front YFZ450 spindles (reamed) $60 (clean) YFZ450 front hubs $60 (clean) 01 raptor rear shock (+2 over stock) $40 (clean new) bearings Polished rear link $120 (like new) Cascade polished billet pegs w/ extra mounts for peg relocation $20 (like new) Chrome shifter $70 (New) DID 520 chain $30 (like new) Primary drive sprockets $300 (like new) Custom painted Fullbore front plastic (white w/ platnum pearl) $60 (clean) Custom white seat $50 (like new) Trail Tech X-bars Polished $25 (like new) ODI lock on grips $25 (clean) Polished TRX400 throttle $25 (like new) Billet on the fly adjust Clutch lever $20 (like New) cables $65 like new) Houser Antivibe bar clamp $200 like new) Boss oversized radiator MOTOR $500 (like new) stockbore cylinders w/ Passion 12 port mild dune/drag porting with pistons $130 (clean head new domes) Pro design cool head w/ 18cc Noss domes $20 (like new) Chrome bullet head nuts $300 (like new) Custom built Stock crank with aftermarket stock length rods ( crank has been trued, welded, and cryo'ed) $150 Tranny has been totally disassembled and inspected all bearings and seals in tranny are new $80 (ok) Port matched cases $35 (like new) Tm Designs composite case saver $150 (like new) Cascade Billet stator cover Stainless allen head bolt kit for whole motor new $150 (like new) P.E. Billet clutch basket $50 (New) OEM Pressure plate,rod,ball, etc $60 (like new) FZR600 clutch fibers All new water pump seals and bearings $15 (clean)Easy Drain Pro Design water pump cover $175 (new)Professional polished clutch cover w/ all billet inserts and wp- cover $50 (ok, has marks)Billet kicker $100 (like new) Boss billet intakes $40 (clean) Stock cages w/Boysen reeds $185 (Like New) PWK 33mm carbs $80 (New) Real K&N 10" filters $400 (like new) CPI pipes and polished silencers $115 (clean) Dune runner fronts on polished douglas $325 (like new) 21x12x8 10 paddle Skat Trak on polished douglas or I will take $7600 for the whole bike motor rated @74hp and weighs Appox 260# . This bike runs with the Cheetah Cubs and big bore bikes Everything is new and has been rode 3 dune trips and has been tested and runs great and is very fast. I am ready to build my next project so it is time for this to go.

May consider parting if there is a interest you can email me at duner00@yahoo.com for part offers

New Price $offers$

Thanks

I have a full custom Banshee duner I just finished and I am ready to sell it and move on to the next project CHASSIS 2008 built custom chromoly duner +2 stretch frame .065 wall with baja style front suspension Custom chromoly +4 swingarm .095 wall Custom +1.5" chromoly antivibe stem Custom +2 +0 chromoly a-arms 0.95 lowers and .065 uppers polished JJandA 40mm carrier JJandA billet play axle assmemly YFZ450 twin piston caliopers front and rear stainless braided brakelines front and rear polished front YFZ450 spindles YFZ450 front hubs LTR 450 Custom works special edition front shocks (+2 over stock) 01 raptor rear shock (+2 over stock) polished rear link Cascade polished billet pegs w/ extra mounts for peg relocation chrome shifter new DID 520 chain New Primary drive sprockets Custom painted Fullbore front plastic (white w/ platnum pearl) Custom white seat Trail Tech X-bars Polished ODI lock on grips polished TRX400 throttle polished YFZ450 front brake w/ shorty lever Billet off the fly adjust Clutch lever New cables Houser Antivibe bar clamp Boss oversized radiator MOTOR new stockbore cylinders w/ Passion 12 port mild dune/drag porting Pro design cool head w/ 18cc Noss domes Chrome bullet head nuts Wiseco prolite stock bore piston kit Stock crank with aftermarket stock length rods ( crank has been trued, welded, and cryo'ed) all bearings and seals in tranny are new Tranny has been totally disassembled and inspected port match cases Tm designs composite case saver Cascade billet stator cover stainless allen head bolt kit for whole motor new P.E. billet chlutch basket new OEM Pressure plate,rod,ball, etc New fzr600 clutch fibers all new water pump seals and bearings easy drain pro design water pump cover professional polished clutch cover w/ all billet inserts and wp- cover billet kicker Boss billet intakes boysen reeds new PWK 33mm carbs new Real K&N 10" filters CPI pipes and silencers Dune runner fronts on polished douglas 21x12x8 10 paddle Skat Trac on polished douglas motor rated @74hp and weigh Appox 260# Everything is new and has been rode 3 dune trips and runs great and is fast I am ready to build my next project so it is time for this to go. $9500 obo Will consider partial trades for a 06 or new YFZ450 in great shape I will post updated pictures soon These are from the day it was built and was not completely finished thanks God Bless!

Its a 12 bolt. I paid $375 from direct drive 2 months ago

i have a like new direct drive polished cover ( not a modded OEM cover ) with lockout and bolts $350 shipped (usa only)

I will be there . I am on the green and white banshee What do you ride?

Magz we need to get together we ride at App. and keystone. We have been going to the drags ai nowata lately . I think we are going to start ridingout at Eufala too.

Thanks for the help and the wrench . That helped get the bike back to camp.

Who is the main manufacture? I broke one of mine and need one fast.....

As Said . Let me know what you got thanks

Sold, just paid for them thanks Tankinator

i AM LOOKING FOR A GOOD SET OF CPI SMALL BORE INFRAMES WITH SILENCERS. LET ME KNOW WHAT YOU GOT PM ME PICTURES AND PRICES THANKS

Yes, It is Thanks

ttt

I am looking for a set myself (CPI std bore inframe) does anyone still have any? Of course dude gets first pick . I dont want to be a highjacker!!!

CHECK IT OUT EBAY BANSHEE YFZ450FRAME