r_flagel222

check to see if the choke {cross-over hose} is there in place...... i just had a banshee of my buddys kick my ass for 4 hours till i saw the rubber tube that runs between the two carbs and connects them was removed.... i had the same sympoms as you are desribing.... good luck you may have or may have not been talking about this tube in your last reply......... i gota make sure.... some say crossover tube and mean the one on the intakes..... good luck once again

thanks ... lol, never sit out!

look, i know all you guys will recomend a FAST kit, but i dont have the cash, im in a jam right now..... have one more race next sat. and cant miss it! i have a 2002 R6 with a barnett clutch pack i installed three weeks ago... not much time on it, maybe 6 or 7 30 mile rides on it. my question is will this clutch fit in my banshee? thanks guys

many dont like these builders but i havent had any problems....Thanks to Trinity i wraped up the season championship at Hartford Speedway Friday night. thanks to the guys here also that helped me get this thing tuned to perfection! i Have traveled to other tracks in Indiana and won their also. Thanks too all!

Anyone know of a Todd Bell from Pleasant Grove UTAH? seems that he has maybe riped me for 175.00 ..... .... ...... ..... Thanks my fellow headhunters......lol

yeap, my right rear gains around 1.25 lbs in 20 laps.... thanks brother

well i won one of the heats and took the feature! the taller tires gave me lots of bite... had to adjust air press. to create wheel spin ... but im getting it thanks nos!

Type in IndianaFlattrack.com shoud be what you are looking for.....

i had to feather the clutch alot last race with them new tires... gearing was off as i said, hopefully that dirt digger clutch will hold up to the abuse.... thanks again for your help

thanks partner... i was thinking thats the way i needed to go but just making sure . points race is real close right now and cant aford a bad night, trying blind! thanks again Ryan

i was running 15 front 41 rear with 59'' hoosiers on a 10'' gearing was perfect. i switched to 61'' right rear and was to low in gear to hit band on exit. can you help me with the changes to get back were i was in the gearing? thanks for your help in advance! ryan

mine ready for 2008 season

just as stated... i wanna check prices from u guys on a used wheelie bar for stock swinger... if anyone has one let me know what it is worth to ya, wont hold anyone to anything.....lol thanks guys

i had stock gearing on it and my 59inch hardest compound hoosiers fot flattracking. second gear launched hard.... hard enough that the first take off i smacked the grab bar. ... i might add that i had to have a leather jacket and gloves, i used my street bike coat. thanks for the comments guys!

Snowmazz13--- it was extemely hard to keep the front end down..... launched in second and basically wheely walked down the track till the 6th gear shift.... i will be looking into a wheely bar so i can give her hell next time around

alcoholbanshee----- i know that 131 changed owners recently, like a year or two ago, they were all pretty fair with me, no problems. tech was really only worried about nerfs. i went on a test and tune night. ill be trying it again. maybe we could get up there together sometime, so i have someone to run with. the sleds i run smoked me.

1/8th mile times.... quads can not run the 1/4 mile at US 131 dragstrip

thanks nyuk........ hard to launch that thing on all the rubber on the track. the -2 swinger aint for draging! lol it was a blast

1st time at the drag strip ever... US 131 Martin, MI 1st pass , slamed grab bar at launch..... note to self ........ sit on tank...... lol 10.62 @ 70.76 1/8 2nd pass, better launch 8.50 @ 79.52 3rd pass, 2nd - 4th wheely 9.31 @ 77.28 are these times respectfull? thanks guys

the holes in the splash bowls have been drilled out large, and vintures on the needle slide have been ground down, i cant get the bike to clean up down low...... it runs good in the power band, down low it is rich and smoky... thanks

hey guys, what is done to a set of 34mm pjs to convert to alky? please be specific... thanks i have a set and i think someone has tried to convert them....

should be set at 16 mm .... thats where i ran my pjs at

come on someone help here, im working a bike doing the samething right now! any comments on this subject would be nice!

im looking for a cool head... i have domes.... i bought one off flea bay and its a p.o.s. no name brand .. cant get it to seal. please feel free to call 269-591-1320.................thanks

what size were your carbs dan? i have 34 mukunis....thanks