okbasspro

We will be there 16-22 we are taking the drag bike and the rail going to stay in the campground should be 5-6 in our group

Will try the new tires today at the dunes the tires in the pic are sand devil 20-11-8 9 paddle I was told by several members that it will just spin with the long swinger we just race at the dunes not at the track the other tires belong to my sons bike and I will buy some for mine just want to buy them once not several times. Jeff

Pic

Its a Kenda tire buffed down and scat trac paddles added

Look at these http://cgi.ebay.com/ebaymotors/28MM-CHROME...emZ170191664329

Where you at I may have one for you I know it needs bearings I will look it over if your interested.You can just have it. Jeff

I will have to get bigger paddles for my bike and would like the input from the drag guys. I have a set of 23x10.5x12 scat tracs on rockstar wheels that I stole from my sons bike but would like to run a more common size for the Banshee. Mods are as follows bore +.020 ported and polished juggs ported reed cages milled head PWK 28s toomey 2n1 airfilter OOF hand coned pipes 16/42 gearing running on 115 av gas with Klotz Techniplate at 32.1 mix clip on 3rd position with 155 mains and 50 idle Thanx Jeff

Give a shout if you see us. I will probably be watching my son race we have the shee in the pic and a black warrior. Also in the party is another shee a craptor and a can am 2 seater. Happy Trails

Well the bike is done and we are headed to LS on 10/24-10/26 say hi if you see us I wear a yellow riding suit and my son wears green. Happy Trails Jeff :yelrotflmao:

Was wondering if a stock petcock can be rebuilt mine leaks fuel and that can not be safe. Happy Trails :yelrotflmao:

I have a Pro design PD100 Tether kill switch the inst. say to hook it into the existing kill switch wires can anyone tell me the color code for them. This is one of my last items to add and then off to the races. Happy Trails Jeff

Great seller and lightning fast shipping

Thanx Toyboxx payment sent Jeff

Great post I now know where to start on my jetting will post setup as soon as it is dialed in I am way lean for the mods I just did. Happy Trails Jeff

My son and I will be there oct 24-27 orange and purple Banshee and a black warrior he will run the drags a lot Jeff

Anyone?

Do you got a flywheel by chance Jeff

Looks to be a dune port I run at about 1500 ft elevation

I will be there OCT 24-26 2 banshees 1 warrior 1 craptor

To be honest I do not know I bought them from Arfountain on here they look to just be cleaned up nothing real drastic still lots left in the middle support of the intake area

Looking for a flywheel for my banshee also need the nut that holds it on Thanx Jeff

Hello I need the advice of some of the gurus on here I have done some mods to my motor and do not know where to start on my jetting and do not want to burn up the new motor here is a list of what I had and what I have now What I had stock bore and port T/5 pipes k&n with drilled airbox PWK 28s ran needle in 3rd clip mains 130 pilot 50 air screws out 1.5 What I have now +.020 bore ported and polished juggs ported reed cages milled head oof drag pipes with silencers +4 timming 2 into 1 toomey airfilter PWK 28s thanx for any help I can get Jeff

PM sent

A very honest seller and fast shipper always has good deals :beer:

Hello I rode there last winter it was a blast not crowded at all even had fun with the snow on the sand. I dont know when I will go again I am in the middle of a complete teardown and rebuild. Should be a screamer when done. I ride more in winter than summer. I build HVAC units and my riding buddy services them so summer is real busy for us but winter time we go once or twice a month. HAPPY TRAILS Jeff :beer: