Flyinacez

Everything sold except complete front brakes with 50% pads left.

Swinger skid, key switch and nerds sold

Rear brakes, seat & k&n filter sold

Exhaust, Plastics, Airbox sold

Motor sold

Please email any question to [email protected] I will respond very quickly. Thanks A-arms, tie rods, swinger, bearing carrier, belly skid all sold.

Peeps please email me at [email protected], i can only send 1 responce every ten minutes due to the sites spam settings.

Headlights, Frame, axle, DG Bumper, Wiring Harness(coil still available) all sold

How about $20 shipped, no cuts anywhere, good shape. thanks

$13 to ship thanks

I'm thinking the plastics would be quite expensive to ship way out there, they would require a large box. I will squeeze them all together tomorrow and get you a quote. Thanks

You can see in the front end picture that despite the frame bend, the front end looks good. There is no abnormal tire wear either.

Please email me at [email protected] for any info! Prices do not include shipping. Where it says(will split) I will split up the components of the particular system. FMF Fatty's with FMF Silencer's $250 Headlights - $40 Taillight - $10 Wiring Harness/coil/regulator etc(will split) - $30 CDI - $40 Foot Pegs - $10 Nerfs - $30 Rear Grab(stock) - $10 Rear Grap(aftermarket) - $15 Front Bumper - $20 Front Brakes %50 left(will split) - $50 Rear Brakes, needs new pads(will split) - $60 Seat - $40 Key/Ignition - $15 On/Off switch - $20 K&N filter/Prefilter/Adapter - $40 Filter Box -$10 Front Shocks - $30 Rear Shock - $50 Radiator - $40 A Arms / Spindles(will split) - $80 Stock exhaust - $40 Rear Skid Plate - $15 Gas Tank/Petcock(will split) - $15 Carbs & Throttle/cable(will split) - $50 ( carbs are good but I couldnt get one of them back together properly when I took them off the bike?) Engine(needs work) - $250 Frame(has a bend aft of a arm mount but rode straight) good VIN, if someone just needs a VIN #, I could cut it out and ship for $5. Best Offer on this item. Plastics are good and complete and I will have them up shortly as well as good rear hubs, rear disc brake/hub, rear sprocket hub,axle and carrier. I'm sure I have forgotten something. Let me know if you need anything. Thanks

To all those that are sending me PM's, please be patient. The forums allow me to send a response once every 15 mins?? I don't have time to sit and wait to reply to all. I'm sorry if I have not responde quickly. I hope I am not breaking any forum rules, please email me at [email protected] and you will have a response within 12 hours. I will also be putting up a complete part out list with prices soon. Unfortunately I am going on vacation in 2 days and will have very limited internet until the 29th of June. I have included some new photos of the engine. Cylinder head off, one side is very pitted, and the piston on the same side is aswell(not as bad) but will need replacing. Cylinder walls are good. Other piston is good. I can move the kickstarter and you can see in the video that the pistons are moving aswell. The clanging you hear in the video is actually my bolts pan clanging around. I can take another video if any one that wants to buy it wants me to. It has a wiseico crank and the pistons are 3 over. The bike does shift through the gears, I don't know what caused the kickstarter to not turn over or all those small aluminum shavings in the oil.