lt250rfd
-
Posts
248 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by lt250rfd
-
-
Sounds like you may have welded your clutch rod to the ball. Pull your cutch off and try to see if you can sneak them out together......if not then your gonna have to split the cases and then try to remove it.
Are you talking the pancake bearing and the push rod? those are free. the gear on the back side of the clutch basket is still intack with the shaft and spacer and thrust washer. my guess is its seized and or welded and may be the issue. just unsure on how to remove with out prying. gonna try to mess with it later tonight.
-
-
need some suggestions/help on clutch issue. shee runs fine but no clutch. has pressure on clutch handle like should, so checked and reset all adjustments but no go. replaced cable thinking had stretch as well as plates and springs but still same issue. so pulled basket plates etc...
has anyone had problem with washer and or spacer seizing or welding itself to gear behind basket? to me thats where the problem lays but not sure. gear is still on shaft end as well as spacer and washer. now wondering how to pull gear washer spacer etc... with out prying or breaking anything. snapped a few pics but no luck uploading. any help or advice would be great. thanks, joe.
link to a few pics
-
http://www.mediafire.com/view/?d6t8fdgmh7mts3m I just uploaded it for you from my library of service manuals. Let me know if this doesn't suffice. Hope you don't mind its the pdf and not the paper copy.
Thanks that is what im looking for, more so the electrical section but can make do. Hopefully I can get it figured out. Thanks again, Joe
-
like the title says, looking for a manual for a 2003 50cc polaris. actually just looking for the electrical specs in it. my daughters quad lost spark so looking to test components.
-
-
insurance and keep it put up when not in use. scumbags around my area will go by with camara phone and take pics of open garages than get bigger pic on pc to see what you got and what to get.
-
everything sold but secondary clutch, oil resi/airbox, and some radius rods.
-
cool we should go riding when it gets nicer out ,i have two or three buddys that i go riding with, no banshees tho, do you have a decent sized group that you go with? lol manhappenin is what we call it .
Sounds good, won't be riding until sled season over. Cool, all good. Well depends, some times a few and other times 10 plus depending on where we go riding. Been riding trails in northern wisc by families property with big group. Usually try to hit up badlands, cliffs, or fox valley a few times a yr. Use to ride the dumps and casino area before started cracking down.
-
yeah im ten mins from toliet, manhattan where do you live?
actually in rockdale so not far from manhappening
-
from toliet area
-
What is left:
Heat exchangers, flywheel, chaincase, wiring, expansion chamber, red plastic ski (does have damage), driveshaft, steering stem with rods, intake boots with crossover, gas tank shroud, fuel pump, snow flap,headlight, brake rotor, rear bumper cover, park brake lever, top half or airbox, chaincase dipstick, steering rod, caliper for parts, misc. coolant hoses, ski bump stops, pulse coil, voltage sensor, water pump.
Also have a hood and rear skid. Hood has damage but is usable. Skid has seen better days and could be used for parts or rebuild.
All parts located in Il, south suburbs of chicago. Have pics if need.
-
What is left:
chaincase cover, new windshield polaris #2874612, mirror, exhaust grommet, hood plenum, steering stem, drive/jack shaft, brake rotor, cdi, voltage regulator, some wiring (hood section and short cdi piece), y-pipe, 13 plate hyvo chain, handle bar clamp, handle bar pad, drive cog, steering boots, rear bumper covers, handle bars, coolant bottle, hood strap, ski bump stop, throttle cable, secondary clutch, ski spindle, steering stem bushings and keepers, misc. hardware, drive/jack shaft flange.
All parts located in Il, south suburbs of chicago. Have pics if interested in something and have paypal.
-
pm sent
-
2004 Rance all aluminum snowmobile trailer. Wishbone tongue with 2" reciever, 4 prong plug. 2 place 101" wide by 120" long. Has 2 tie down bars, track mats, new spare tire. Has 4 tie down hooks mounted in the rear, 2 on each side. Just regreased the bearings, no miles since. Low mileage. Have clear title, original owner bought it new. Asking $900.00 or best offer. Also have a salt shield that may go with it or for sale as well. Trailer is located in 60436 area. Pm me or call/text 815-585-1538
SOLD, Please remove
-
stolen banshees from northwest indiana, not mine but saw on craigslist.
-
do you just have front tires? or rims? i'm near joliet.
-
2004 Rance all aluminum snowmobile trailer. Wishbone tongue with 2" reciever, 4 prong plug. 2 place 101" wide by 120" long. Has 2 tie down bars, track mats, new spare tire. Has 4 tie down hooks mounted in the rear, 2 on each side. Just regreased the bearings, no miles since. Low mileage. Have clear title, original owner bought it new. Asking $900.00 or best offer. Also have a salt shield that may go with it or for sale as well. Trailer is located in 60436 area. Pm me or call/text 815-585-1538
-
payment sent
-
pm sent
-
-
-
i have a 2 into 1 setup with a 35pwk carb
comes with intake and boot ,pod,and throttle cable
trade for ur stock carbs with no TORS ,intakes ,throttle cable and pods ,LMK wat u guys got ,thank you
how much would you sell for? i have some stock carbs and k&n filters with outerwears.
-
My buddy has a 2:1 intake with a 35 PWK with it. Not sure of the maker off hand, but PM me or him (oxtaco) and i'll get the info for you. Price i'm not sure of, but he wants to sell it i know.
pm sent
Clutching issue
in Banshee Repairs and Mods
Posted
no havent had chance to get out there with work and family hopefully can mess with it this weekend. if dont have anything going and get those parts back for that bike let me know can wrench on them in the garage.