Jump to content

strokerace

Members
 View Profile  See their activity

  • Posts

    253

  • Joined

  • Last visited

 Content Type 

Posts posted by strokerace

  1. dyna box

    in Drag Forum

    Posted

    custom programmed mine ran great for about a month then startedgetting kick back when i tried starting it causing me to break every thing from a kick idle gear to the clutch basket drive gear even a clutch cover because the pieces got jamed broke everything a least twice put stock bax on it runs fine no problems

  3. motor decisions

    in Drag Forum

    Posted

    yes thats what i have hurd about the turbo bikes talked myself out of doing that really leaning toward the 4 mill over the 10 but i really dont knoweven thought about a 7 i going to start on this in the winter so im not rushed on time going to put new motor in drag frame i already have and put 18 in a rigid frame and i have to get thet done first

  4. motor decisions

    in Drag Forum

    Posted

    i already have the 4 mill crank and plan on building it over winter dont really know if i want to build the 10 because how much faster will it be over the 4 and i already got my 18mill just kind of weighing out the two the 4 mill will rev to the moon and the 10 has more torque but just dont know kim at k&t said the 4 mill dm screamed like a raped ape

  11. I think i f#$ked up need help

    in Banshee Repairs and Mods

    Posted

    seperate the cases you dont even have to take the cylinders off the upper case halfs if motors not in the bike it shouldnt take more than 45 min to repair and put back together and if you havnt fired it the seals should still be good and reusable dont waste your motor over 45 miniutes work leave the top end bolted together and take case bolts out seperate case halfs clean case surface turn crank seal around put yamabond or other sealant on case half torque back down and done took mine apart a few weeks back and took like 2 hours and that was taking motor out of frame and replacing tranny and putting it back in the frame

  14. drag frames

    in Drag Forum

    Posted

    im putting the 18mill i built this spring on it and building a 4 or 10 mill for the frame i have now this winter i hope to have the rigis with my 18 mill done in a few weeks but my other will be done in spring

  15. I had A Dream

    in Roostin' Room

    Posted

    vic will be playing ball this year till just be 2 of them at the other end of bubbas dick "i love pitts thats my dog of choice if raised right they are just as good as any and better than most)my dogs aim to please and are smart as tacks

  17. motor decisions

    in Drag Forum

    Posted

    ok heres the question have a little time to make up my mind I just sold my 73mm cheetah cylinders and hole topend carbs included off my 4 mill today. Last week i bought a rigid chassy for my 18 mil which im going to build in the next couple weeks and run this year but that leaves my e.t. bike down i was going to build a 4 mill d.m. cylinder and put in my stock drag chassy that im running now but then i got to thinking what about a 10 mill the only difference would be the crank in price they say that the 4 mill d.m. is a real screamer but my heads a running in a thousand different directions on what to do just wondering about some opinions even thought about a turbo on my 18 mill from a&s whichwould be mean but howconsistant and reliable would that grenade be

BHQ Quick Links

×
×
  • Create New...