paulnyw

hey i am rebuilding my banshee and want to know what kind of jetting to start with i have these mods .80 over with mx port ,pro lite pistons, fmf fatty, stock carbs no tors and individual filters , stock uncut head probably going to bump the timing plus 4

hey i need a head or the piece that bolts to the head where the cooling goes in thanks

thanks that is exactly what i was looking for

i am looking for a chain guide the one that goes on the pivot tube for the swingarm and cant find it anywhere any body know where to find them?? thanks

hey any chance you still have the carbs i will paypal you tonight if you do

ya i found a good crank stock stroke with pistons so i think i am going to go that route still looking for cylinders and a head

what about if i run a + 4 crank with stock length rods? do i just need to have the domes cut or do i need the pistons to??

where are you located and what is a general idea for a price on a frame swingarm and a-arms?? i can do the prep work if need be

hey i am starting a banshee project i am rebuilding it fromthe ground up does any one know of sand blasting or bead blasting in new york area?? i want to get the frame.swinger, and a rms blasted so i can repaint them or have them powder coated

ok after getting a banshee project that i know nothing about- the guy said it was a stroker with 404 big bore but he blew the top end and took the cylinders off before i got it so i have no idea of how to tell what the crank really is soooo i have concluded that my best bet would be to pull the motor and tear it down so i can find out what the crank is and get it trued and welded while it is out and then go from there as far as buying new pistons and cylinders is this what you guys would do?? i know off the top of my head i need cylinders, pistons, head, basically a whole top end so if any one has anything they want to sell let me know thanks

do you have pics of the cylinders??

to be totally honest i have no idea i amtotally new to banshees what would the domes look like if they were cut?? is there a way to tell if i just have a normal crank??

the machine has a cool head with 22cc domes i would assume this is for use with a stroker??

hey i am really interested in the cylinders is that the price shiiped??

hey the rods said 29L

up top by the needle bearings??

hey i am new to the banshee world just got a banshee today i traded a non running sled for a nonrunning quad anyway the guy said he broke a ring while riding and scored the cylinder he took the cylinders off and the pistons and lost the pistons somewhere he said the crank was a hotrod stroker and it also had a 404 big bore in it how do i confirm that it is a stroker crank or stock before i go and buy the wong pistons sorry for the long post and thanks in advance for the help!!