BLASTERMAN11

amsoil in the gas and benol in the tranny. and i deffinately wouldn't ride it with no filters

sorry bud but i gotta point out the fact that you can't powder coat stock a arms

thats a bad ass bike man, deffinately a clean one

an aftermarket gas cap with the short hose would make the handlebar area look alot better imo. pretty sharp bike though

the razr's slip really bad if they get any water on them. i'd say no go on the belt, deffinately creative thinking though. to each his own

i wouldn't give a $1.99 for them pos's. got a pile of them behind the shop lol

no input from anybody else? surely me an ricardo aren't the only 2 people that have ever had this problem?

mines the front bolt, i done the same drilled a hole through the back side of the frame an done it like that but the stock nut sticks out a little bit to bolt the peg on flush, my problem there being that i had to grind all there bs welds off to make everything flat again and had to use a spacer with my bolt set up, the bolt having the spacer between the peg and the frame made it weak and i bent it again today jumping it so i gotta figure sumthin else out

just bought a banshee wednesday an rode it today, noticed the left peg was loose so i was gonna tighten the bolts and it just spun. took the peg bolts out to finde that the previos owner had broken the external original frame nut that holds the peg and tried to weld it back but it's now broke again, my question being what is my best option for fixing it? the welds didn't look very good at all, would i be ok to just weld it back? just looking for some options/ opinions

not as good as a set of paddles as far as just sand but if you're in sand/dirt they would be a good buy i'd say. i had a set for my last bike that i used for mud and snow an they worked great for that

TTT this really needs to sell come on $2,000 for a good runnin banshee with the title in hand ready to sell

ok i got the bike but my dad still has to sell the bike so he dropped the price to $2,000 but he wont take anything less

lol that sucks, i think i'v got my banshee gone. Im gonna trade it and my 1988 honda shadow motorcycle to my dad for his 2007 honda shadow. he just got a new harley so i'm takin the ol shadow. the bike in the link is the same except mine has a $500 mustang seat that is sweet, vance & hines drag pipes (loud), saddle bags, and a sissie bar. http://www.google.com/imgres?q=2007+honda+shadow+750&hl=en&gbv=2&tbm=isch&tbnid=He53dAPNYUUJEM:&imgrefurl=http://www.powersportsnetwork.com/enthusiasts/new_vehicle_detail.asp%3FVehicleCode%3D37824&docid=uBxqoP4MXo9zPM&w=400&h=300&ei=cCNsTtisCu_CsQKIytXBBA&zoom=1&iact=hc&vpx=662&vpy=201&dur=5038&hovh=194&hovw=259&tx=140&ty=115&page=1&tbnh=125&tbnw=166&start=0&ndsp=17&ved=1t:429,r:9,s:0&biw=1280&bih=556

ttt SOMEBODY PLEASE BUY ME

oh lol ok, well actually i didnt get hurt (i wear a helmet) it rolled over me but it was pretty much over me not actually touching me but something landed on my right hand on the tender part of ski if you pinch it between your thumb and index finger hand hurt for a few days and i got a few scrapes on my back from sliding across the ground but other than that i was ok. did you get the shee off ebay you bidded on???

TTT

what do you mean by my damage? i a lever in my spare parts box and i didn't see the point in spending the money on new fenders when they'll just get scratched and scuffed again because some of the trails i ride on get pretty tight. and the stitched fender holds good and looks good also

i dont know if the previous owner ever rolled it but i did roll it over the top of me once while doing a wheelie, the left back fender snapped about a 6 inch split that i stitched up and it bent the stock clutch lever which i replaced with a new lever and added a block off plate to take the parking break off. i can send pics of both of these via text if you pm me your number

TTT

oops my bad failed to put the important part lol. asking $2,500 or make an offer

like it says in the title i have my 2005 banshee for sale. its all stock engine wise other than piped and jetted. has a couple chrome pieces back tires are pretty new. if interested please call or text me at 918-467-0332 for pics or more info. i am located in coffeyville kansas SE ks. this is an old pic but its the only one on my laptop. i have more on my phone so just shoot me a text and ill send you some more recent pics.

i dont know what that is???

so, you want me to measure the edge of the rim all the way around or???

yeah i had something like that happen to me reall quick, one mitute i was doing a wheelie next i was laying on the ground. bent clutch lever, handlebars, rear bumper, and put about a 6 inch break in my left rear fender

11 inches from lip to lip