Veecha

Can you email me Some Pics to [email protected] ?

Got any Good Motors? or Top ends?

Im interested in the Cylinders and Crank, can you send me pics to [email protected] Thanks where are you located?

IM interested and Im local, Could you PM Me you r # so I Can call yo about it?

I'll take them!

Cool, Money is kinda Tight (Holidays) So that would be Sweet

I got a set of ported jugs with prolites, less than 6 hours ride time. Jugs are 0.20 over and ready to run. Can i get some pix sent of both? to [email protected]?

Just noticed that , Im not used to having a "Wanted" Froum. Can a Mod move this over there for me ?

hey guys, my banshee blew up! I need Some Cylinders, and a Good Crank for Starters. What ya got?

Ive never had the Crank out of it b4

I meant to say 110 octane Race Gas, ( I Like the Smell) As for performance mods , I have older Toomey t5's, v force reeds, K&N slip ons, jetted, Cool Head, Stage 3 Dune Port Cylinders, 3 deg Timming tooth, rev limit thingy disabled? and Im Sure another couple things I cant think of right now

yes the cases can be rewelded... i belive its called heliarc.... if its not leaking though dont worry about it unless your one of those guys that nutz about apperance.. (i am) Im not Concerned with looks that much, but the Holes ae about Quarter Size so they have to be fixed. your cranks shot sound like dont bother rebuilding for that price you can buy a new one... figures. :ermm: now your saying the cylineder is broke? you mean the flanges at the bottom of the skirts? if so then yea its trashed... yea the flange, looks like the rod caught it. :mad: domes can be salvaged depending how bad they are scard... you can have them recut to a bigger size.. if they are indeed 15cc dome they are too small foryour application anyways... why would they be too small? your best bet if you where happy with the way it ran before find someone local or on ebay or where ever that has an old stock crank from a bike that wasnt rode much and went to a stroker... you can get them for like 75 bucks... and replace yours with that one...as far as the jugs go you might beable to keep those depending on hat was broken. so $75for a crank with rods? how much should i expect to pay for jugs? Sorry, Ive never rebuilt a Banshee Engine, but Ive Built a handfull of Race Cars and this stuff is a little different than im used too...

Yea, 15 or 17 cc Domes, Im almost positive its 15cc, I run Torco 100 octane Race Gas with Golden Spectra oil.

Hey Guys, Im a "Newb" on here but Ive been Lurking for long time I have a 97 Banshee with Ported Cylinders,15mm Cool head, Toomey T5's, K&N's, Jetted, 4deg timming... To make a long story Short, I let my little Cuz Borrow it for the week and now its Blown up! I cant blame him for it cause ive abused it way too much Anyways, I Pulled it apart. Heres what I found Upper and lower Cases Broke , Weldable? (I think So) 1 Broken Rod loose rod on Crank (bearings?) 1 Cylinder Scratched and Broken at the Bottom (Junk?) Cool head Domes scard up Shavings everywhere! I havent Split the Cases yet because Im not sure I know what I want To do. I was happy with the power it made b4 and Im kinda Strapped forcash so i dont want to dump a whole lot of money into this thing just yet. What are my options, I think i can weld my cases back together. As for the Crank its probably junk right? IfI were to get one of those 4mm Stroker kits would I have to change anything else? or machine anything? Also, where can I get new Domes for my cool head, mines kinda chewed up. Or should I just get a used motor off of ebay or something?