jtraptor660

i have a 7 disk set i might be interested in trading. you trading basket as well. is it hinson/billet or stock?

Got a 450 with a 04 frame and the rest of the bike is off a 06. Parting this bike out. everything goes except wheels, tires and handlebars w/clamp the only thing aftermarket on this bike is the motor, pipe and K&N. ALL ITEMS ARE PLUS SHIPPING 06 Motor, less then 1hr on it since rebuild, 480cc, cylinder works cylinder, high comp piston, cam mod, new cams, new clutch, new crank, new timing, only thind untouched in this motor was tranny and valves. Has a small leak underneath, no cracks just didnt seal up like factory, asking 1800.00 for motor will include carb and wiring for another 200.00 carb has a idling issue when coming off throttle, prolly an easy fix. titled 04 frame and subframe, powdered orange, the bolts on the subframe have been pulled out so when you mount a rack you need bolts and nuts 450.00 Shortened DRD pipe w/header (back side of mounting tab is cracked, still mounts fine) 150.00 K&N with billet mount 50.00 Front end, aarms, shocks tie rods and hubs 300.00 rear shock 75.00 swinger 75.00 axle 75.00 black irin cross front bumper 50.00 Black PAINTED plastic. not the best in my eyes but im real picky 150.00 And a bunch of misc parts from a part out. hubs, oil tanks, gas tank, steering stem I would like the motor to sale before the rest gets parted. WILL TRADE STUFF FOR BANSHEE DRAG ITEMS. in need of 4mm or 10mm crank with drag ported aftermarket top end

still got these.

Got a 450 with a 04 frame and the rest of the bike is off a 06. Parting this bike out. everything goes except wheels, tires and handlebars w/clamp the only thing aftermarket on this bike is the motor, pipe and K&N. ALL ITEMS ARE PLUS SHIPPING 06 Motor, less then 1hr on it since rebuild, 480cc, cylinder works cylinder, high comp piston, cam mod, new cams, new clutch, new crank, new timing, only thind untouched in this motor was tranny and valves. Has a small leak underneath, no cracks just didnt seal up like factory, asking 1800.00 for motor will include carb and wiring for another 200.00 carb has a idling issue when coming off throttle, prolly an easy fix. titled 04 frame and subframe, powdered orange, the bolts on the subframe have been pulled out so when you mount a rack you need bolts and nuts 450.00 Shortened DRD pipe w/header (back side of mounting tab is cracked, still mounts fine) 150.00 K&N with billet mount 50.00 Front end, aarms, shocks tie rods and hubs 300.00 rear shock 75.00 swinger 75.00 axle 75.00 black irin cross front bumper 50.00 Black PAINTED plastic. not the best in my eyes but im real picky 150.00 And a bunch of misc parts from a part out. hubs, oil tanks, gas tank, steering stem I would like the motor to sale before the rest gets parted. WILL TRADE ITEMS FOR DRAG BANSHEE ITEMS

i may trade it for a well built 10mm motor, pipes, carbs and wiring the works. Or may start parting it out if i get enough interest.

Got a 04 YFZ450 up for trade. It has a 480kit in it and the complete motor was rebuilt less then 1hr ago. crank, cam, clutch, piston, new cylinder works cylinder(not honed) and head was looked over. High compression bike. not even a full tank of fuel through it. Everything on the bike is a 2006 but the frame. The frame is an 2004. DRD shorty pipe with header, K&N. plastic is painted black not real happy with the paint job but looks decent. it runs on half and half, Premium/110. Frame has been powdered orange and has black plastic. Motor has a small leak underneath. no cracks or anything just didnt seal up like factory. All motor work was done by brian balmer at clown racing. Looking to trade this for a 10mm Banshee might consider a 4mm. please let me know whats out there. might entertain purchasing offers. call/txt 623-341-3516 or email me at [email protected] I am located in southern AZ.

pics sent jered

bump this up

i have more pics. it says the files are to large.

send me your email addy and i will get you some.

Got some blue full bore plastic front and race cut rear. In good shape has a couple nicks. one bolt hole has been opened up due to a bolt striping. it is located on the tank where the seat mounts. cant be seen when bolted up just need a washer. Would like to trade them for a black set or sell for 350.00 +shipping. if interested PM for pics.

Another vote for inland being in the wrong. He ordered a 4mm plate he should have recieved one. Granted i would have checked myself but his conditions were probably different. You should recieve wht you order and pay for. And the dude called to verify. horrible customer service in my eyes.

Like it says. i am in need of a brake stay and a clip for a round carrier. Do not need the carrier.

what kind of numbers did this motor put out.

sold

any good brake stay's and clips in stock?

these might be sold. payment pending

lets see if this works

hey james thanks for the feedback. glad you like the parts. keep me updated on your build. should be fast. also let me know if there is anything i can do here in AZ while dealing with Doug at D&M.

i have a non titled 93 frame. not sure if you need a title over there.

Got a set of bare +2 forward stock length deviant design aarms. looking to get a good 4mm crank or some 11 or 12 paddle haulers. tire size must be a 22x11x8 SLS's. Aarms are brand new never mounted and come with all that is needed to mount except bushings. they require you to ream your spindle. caps and crush tubes are used. PM me if interested or for pics. Asking 250.00 shipped

Got a set of bare +2 forward deviant design aarms. looking to get a good 4mm crank or some 11 or 12 paddle haulers. tire size must be a 22x11x8 SLS's. Aarms are brand new never mounted and come with all that is needed to mount except bushings. they require you to ream your spindle. caps and crush tubes are used. PM me if interested or for pics.

aarms sold pending payment.

send me some pics of the klaws. i have some holeshots i might be willing to swap. pics to [email protected]

stem might be sold. pending payment.