yfz450killer

I have a set of Lectron alky carbs with the twist throttle and out of frame big bores with silencers. Take $800.00 for all

I have a set of bb out of frames with silencers I will sell you for $400.00 plus shipping.

Out of frame drag pipes for sale. They are CPI big bore with silencers and chrome. We reinforced the mounts because they were only welded on 2 sides. You can not see it because they are on the bottom. No dents or bad places in the chrome. Excellent condition and they are off of a 510cc Twister motor so they are big bore pipes. I also have the aluminum pegs and mounts for sale as well. Also I have a full set of Marvin Shaw Competition drag shocks. The fronts are 13 1/2 inches tall and the rear is 14inchs. $400.00 obo for pipes $400.00 obo for shocks $150.00 obo for the pegs Shipping is what it costs me to send them to you. Cody 214 725-6372 I am in Dallas, TX Here are pictures: http://i151.photobucket.com/albums/s131/ba...ller/shocks.jpg http://i151.photobucket.com/albums/s131/ba...ler/shocks1.jpg http://i151.photobucket.com/albums/s131/ba...ller/pipes3.jpg http://i151.photobucket.com/albums/s131/ba...ller/pipes2.jpg http://i151.photobucket.com/albums/s131/ba...ller/pipes1.jpg http://i151.photobucket.com/albums/s131/ba...ller/pegs-1.jpg http://i151.photobucket.com/albums/s131/ba...killer/pegs.jpg

Out of frame drag pipes for sale. I think they are wicked with silencers and chrome. We reinforced the mounts because they were only welded on 2 sides. You can not see it because they are on the bottom. No dents or bad places ion the chrome. Excellent condition and they are off of a 510cc Twister motor so they are big bore pipes. I also have the aluminum pegs and mounts for sale as well. Also I have a full set of Marvin Shaw Competition drag shocks. The fronts are 13 1/2 inches tall and the rear is 14inchs. $450.00 obo for pipes $400.00 obo for shocks $150.00 obo for the pegs Shipping is what it costs me to send them to you. Cody 214 725-6372 I am in Dallas, TX Here are pictures: http://i151.photobucket.com/albums/s131/ba...ller/shocks.jpg http://i151.photobucket.com/albums/s131/ba...ler/shocks1.jpg http://i151.photobucket.com/albums/s131/ba...ller/pipes3.jpg http://i151.photobucket.com/albums/s131/ba...ller/pipes2.jpg http://i151.photobucket.com/albums/s131/ba...ller/pipes1.jpg http://i151.photobucket.com/albums/s131/ba...ller/pegs-1.jpg http://i151.photobucket.com/albums/s131/ba...killer/pegs.jpg

Out of frame drag pipes for sale. I think they are wicked with silencers and chrome. We reinforced the mounts because they were only welded on 2 sides. You can not see it because they are on the bottom. No dents or bad places ion the chrome. Excellent condition and they are off of a 510cc Twister motor so they are big bore pipes. I also have the aluminum pegs and mounts for sale as well. Also I have a full set of Marvin Shaw Competition drag shocks. The fronts are 13 1/2 inches tall and the rear is 14inchs. $450.00 for pipes $400.00 for shocks $150.00 for the pegs Shipping is what it costs me to send them to you. Cody 214 725-6372 I am in Dallas, TX Here are pictures: http://i151.photobucket.com/albums/s131/ba...ller/shocks.jpg http://i151.photobucket.com/albums/s131/ba...ler/shocks1.jpg http://i151.photobucket.com/albums/s131/ba...oseuppipesr.jpg http://i151.photobucket.com/albums/s131/ba...oseuppipesl.jpg http://i151.photobucket.com/albums/s131/ba...ller/pipes3.jpg http://i151.photobucket.com/albums/s131/ba...ller/pipes2.jpg http://i151.photobucket.com/albums/s131/ba...ller/pipes1.jpg http://i151.photobucket.com/albums/s131/ba...ller/pegs-1.jpg http://i151.photobucket.com/albums/s131/ba...killer/pegs.jpg

A bunch of us are leaving on Friday April 20th and heading to Glamis California. We will be coming back on the 27th. Meeting some friends from Cali out there. Anyone want to go send me a message. [email protected]

I need the complete wiring harness and the front shocks. How much for shipping to 75069. Send me an email to [email protected] for payment info. I can do paypal or send a check.

I will give you $100.00 for the shocks. What is shipping to 75069?

Still got the swing arm. If so send me some pics.

How much for axle and polished lower shock mount? 75069 zip.

Is the swing arm stock and do you have the entire axle assembly?

I have a set of Shaw Billet Shocks front and rear. Asking $450.00 for the set. Perfect condition and include mounting hardware. [email protected] Cody

I am selling a set of Matt Shearer Out of frame big bore pipes with silencers. Chrome and no dents or flaws in the finish at all. I did however weld more on the mounting tabs for strength. No problem because they are on the bottom where they mount to your pegs. $475.00 plus shipping. These are great pipes. Email me for pics. [email protected] I am in Dallas, TX Cody

Located on ebay below. http://cgi.ebay.com/ebaymotors/ws/eBayISAP...3394&rd=1,1 Reserve is $8500.00 2000 Yamaha Drag Banshee 10mm Twister Alcohol Motor built by Twister Crank Shaft Company in Boring, OK. Their web site is www.twistercrankshaft.com Bike has around 130-140 hp to the ground. Dyno-ed at Little Sahara OK and they could not keep it on the dyno to fully see what it could do. Here is what the bike is and has done to it. 2000 Banshee with frame powder coated purple, Plastics race cut and custom paint job. Seat is custom stiched with extra padding to help keep you on it.(does not help when the bike will jerk you off of it). 10 mm Twister Billet Crank, 510CC Twister Head full drag port, Lightend flywheel, Twister Clutch Basket, Twister High output ignition w/ seperate coils, Twister billet clutch case, Billet flywheel case, V force reeds, Lection Carbs set up for Alcohol, Out of frame drag pipes with silencers, Pingle Valve, Lock-up clutch, Dunable 2-5 override, Marvin Shaw competition Billet Shocks, 10 inch lonestar swing arm with round carrier, 40 mm Aluminum drag axle adjustable with billet hubs, 13X22X11-8 paddles Hauler Extremes, Skat Trac Smoothies on the front, Twist throttle, MSR Clutch lever, Oneal bars, Aluminum steering stem w banshee engraved, Aluminum cap on front brake, KillSwitch, Chrome Wheelie bar, Wave Rotor back brake, Billet coolant bottle holder. OVER $16000.00 INVESTED AND $9000.00 IN THE MOTOR ALONE. Bike has been run on Benol 2 stroke oil and is setup for Alcohol. As you can see no expense was spared. The bike runs strong and runs perfect. We are located in Dallas, TX and can meet you within a 200 mile radius. There will be a charge of .25 per mile to cover gas. Call 214 725-6372 with questions. Bike was way more than expected.

Sold

Don't get an extension. They suck a$$. You will be tightening it all the time. Ebay +4 +6 +8 +10 is the guy you want to look for. They are cheap and he makes good stuff and warranties it also. You will need longer rear brake line and a longer chain.

They have what is called a dunable override. For $450.00 you send your tranny in and they make it to where you have 5 gears and can launch in 1st. The best part is that you only use your clutch to launch and then no clutch through the gears. You pull the clutch in when you want to stop or grear down. If you drag alot it is worth it. Trails even help, but I would only recommend if you have had some motor work like 4mm stroker and head work. Just my opinion, hope it helps.

I have seen and heard that warming up and cooling down and not staying constant in speed makes a difference. I have built 100's of 2 strokes and the one thing I have to come to realize is this. If it is going to break it will usually within the first 30-an hour. Fire it up, running it a little rich is best for breaking in a top end, rev it up a few times, get on it and beat this piss out of it. If it is wrong or defective you will know, but if it is right then it will last for as long as you take care of it.

Anyone use the dunable overdrive set up for thier trany? I understand it changes you from 6 to 5 gears and you can launch in first, also you put it in gear and nevr touch the clutch while racing. I am just curius if it is durable and really gives an advantage in drag racing.

I agree the 1 piece bllet intake is sweet. I am running 35mm carbs. Had to bend theclutch lever though to keep from rubbing the bottom of one of the carbs. bOOST BOTTLE IS A WAY FOR COMPANYS TO TAKE YOUR MONEY AND SELL YOU CRAP AS A PERFORMANCE MOD. Waste of time and funds that could be used to builde your motor right. Remember kids money equals speed, not bolt ons or bling.

Here they are on ebay. I am not quite sure which they are. They fit my stock jugs that have been opened up. http://cgi.ebay.com/ebaymotors/ws/eBayISAP...9650&rd=1,1

Here is the link for them on ebay http://cgi.ebay.com/ebaymotors/ws/eBayISAP...2128&rd=1,1

I am selling a 1999 CR250R dirtbike. New top end, FMF Gnarly pipe, new tires, graphics kit, Procircuit reeds and shocks. Extra set of tires and triangle included. Seat and plastic in perfect condition. Very fast and extremely clean. Local pick up. I am in Dallas, Texas. 214 725-6372

I am selling a set of 2003 stock carbs with the throttle cable. No tors on the carbs. They are in perfect condition and I am selling because I am now running 35mm. 214 725-6372 will ship to USA