foxy30

I put 290 mains in and it was even worse than now,so i put in the 260's in.aleast got it to run.what about the pilots,thanks man

put on some fmf fatties and got her to run well,but it not the power that i had with just the stock pipes.good power in the full throttle but not really any in the bottom.bike is stock but the pipes and the reeds.little bog in the beginning then runs preety good but it has more balls with stock pipes.the mains r 270,and the pilot is stock.running it without the lid,but i don't want to do that(alot of water).can someone please help me.I'm at sea level and the temp is 25 to 50,thanks

yes,everything is stock but the pipes and the reeds,gas cap is stock.it dies after 10min,then unscrew the cap it starts right up and runs fine for 10min.can i change it,or take it apart and fix it.i think the hose is fine,any help thanks

went out to check her out,read some posts and i tried taking the gas cap off,ran very well with it off,can it be my gas cap not letting air in.I don't know please help

hey guys- just finished rejetting for fmf fatties. went to 270 main and left the pilots at stock[25]. ran good for a coupole of days then started to boog instantly with any throttle. my elavation is 0 -stock except pipes-temperature around 40,but recently got a little colder 30-could that bve the problem any help is much appreciated

got your pm,and if u find anything let me know.thanks

when i had the 290 main in i did have the lid on.

hello to all looking for a set of back tires(stock)thanks

i put in the 270mains and took the airbox cover off,shee ran real well.and i'm at sea level,30 to 50 degres but i want to keep the airbox cover on.alot of water here.thanks for all the help

thanks alot i'll give it a try

Hay guys, have a ? about pipes.Just got some new pipes for christmas,fmf fatties.put them on and changed the main to 290,(all stock other than the pipes)just wasn't getting the pop shee had before.what should i do next,should i change the pilot,all the help the better. thanks

hello again- just put on fmf fatties and powercore 2s on an 02 banshee and it seems much flatter throughout whole rpm range.rejetted main at 290,left pilots stock. I am at 0 elavation and 30 -50 degrees, air box is stock, bike is stock can anyone help

can anyone tell me where to get individual main and pilot jets ....thanx

how much for pipes and silencers after paint sorry didnt finish reading-ill give ya 180 pipes and silencers after paint....email me at [email protected]

send pipe pictures to [email protected]