bansheeyfz

I just bought some 22inch razrs up front and i have 20 inch razr 2's in the back. will it look retarded because of the difference. I know a lot of XC racers run that setup. what do you run?

gotcha

wait i thought when you go up in elevation you get more air?

so the ones from noss are way longer than the 450 tie rods? meaning i could adjust them more.

I actually just got on it a lil. it felt better. it was probably runnig like shit because of the higher altitude. but if it was rich up there it would have to be even richer down where i just rode it. it has 158 main 52 pilot.

i noticed that the tie rods are pushed to the limit and second are the 450 tie rod ends longer than the bansheeS? Also on the bottom i didnt use dust caps. do i need to put somthing over that or can i just run it open?

i just got finshed doing the 450 a arms questions. I first noticed that the tie rods seem to be pushed to the max. Now if i buy 450 spindles i also need hubs? WIth Mulletmans thread do the a arms work fine and he did.? THe only thing Im worried about is the tie rods backing up.

?

does that mean lean?

I damn problem is i cant take i out and test because my neighbors will flip shit. If I go down to a 50 pilot will it get rid of the bog?

I done it but took them off cause i liked my heel guards. I bolted mine and it worked fine.

yea. you have to drill out the holes a little. They are very cheaply made. water and mud go into the lens. I took em off and will only run them when it snows! GO right for the trail techs if you ride trails. but for sand I would think they work great there hella bright too

Alright it back fires and breaks up in 4th,5th and 6th gear. Also It dosent seem like it has as much low end as it use to . Set up right now pro flow kit -no lid T5's Cool head 21cc domes boyseen reeds on stock cage MAIN-158 Pilot-52 a/s-1.75 turns out 4th CLip What should i do I have 50 pilot s 160 and 155 mains.

Alright it back fires and breaks up in 4th,5th and 6th gear. Also It dosent seem like it has as much low end as it use to . Set up right now pro flow kit -no lid T5's Cool head 21cc domes boyseen reeds on stock cage MAIN-158 Pilot-52 a/s-1.75 turns out 4th CLip What should i do I have 50 pilot s 160 and 155 mains.

4200??

my two shees are runnin 50watt on stock stator. the lights on ebay for 25 bucks but there cheaply made.

Ill find out whats in it tommorow. BTW blazin what are your mods?

ok. should i go down one size in the main or pilot?

mayweather

Im just using the ones that came in them from CPW.

stop using these forums until you learn how to spell

same here. i dont like how they take commision though ebay already gets enough

i got them for 215 and they were never ridden on.

does the skid come with hardware. how much?

i bought new 07 a arms and this is what the the guy said. money sent they do come with everything ill need for a banshee mod right?? tie rodss? Yeah I'll be throwing in the tie rods. The only problem that I can see is that the diameter from the 06/07 tie- rod ends are different than the 04/05 tie rod ends. So you will either have to get 04/05 tie-rods or you can buy 4 tie-rod ends for an 06/07 and make it work that way. can somebody clairfy this?could i use my tie rod ends from my shee?