okbeast

What drag parts are you looking for? Post up a price and then people will give you an OBO. Alot easier that way.

Looking for some stock width, +2 or +3 forward arms. Or possibly some -1, +2 arms.

Damn good 60' time

They don't have to. You can play with it a little bit as some components might be out of spec some. I have mine adjusted where they don't line up to help get rid of some of the lurching off the line and the clutch still works fine.

I'll take all the slow parts

Just make sure none of the ports are covered up and go for it.

I also have my lever adjusted like Paul and it will creep a bit after 10 or so drags in the dunes but nothing like the bike trying to take off.

Pathetic group all around

I've never had someone not answer when I called. He is moving and changing #'s too, that may be holding it up

I got 6-7 threads in it. I remember someone once told me after 5 threads it was just repetitive. We'll see

I'm gonna throw the tires on tomorrow and see how it sits. It would have to be after Snakehunt because I have to have something to run

I was able to add some nuts and washers to the bottom to get it long enough. Added almost an inch I think.

Just make a map with a star that says TITTIES next to it.

I'll give ya $200 for them.

Fixed

lol wtf

Titties and beer - Check White and scrawny - Double Check

Figured I'd see if anyone had any junk to sell at Snakehunt. I've got: +8 swingarm - $250 35pwk carbs - $250 35mm billet intakes - $100 Will snag pics when I take it off bike in a few days.

What spot? Is being tanned and jacked a requirement?

Anyone going to Snakehunt have a 13-13.5" shaw for sale or would want to trade for a 12" (with no extension) shaw?

We get our alky from oilfield supply stores. Bikes have run just as hard on it, and it's free

True story, thanks.

Going on a cub. Might just snag the spacers just in case

I'm more looking to see if I need the spacer to clear the clutch linkage on the top of the cases.

Looking at getting these: http://www.ebay.com/itm/UPP-Intake-Manifold-38mm-Carb-Carburetor-Banshee-350-/200618312563?pt=Motors_ATV_Parts_Accessories&hash=item2eb5c88373&vxp=mtr With some 38 HV lectrons with billet bowls, will I need to run some kind of billet spacer? I hate the intakes with the o-rings b/c I've had problems with them leaking, and it's just another spot for it to leak. Id rather run something like this, with some intake gaskets. http://www.ebay.com/itm/MODQUAD-375-Aluminum-INTAKE-REED-SPACERS-Yamaha-BANSHEE-350-YFZ350-/380416850787?pt=Motors_ATV_Parts_Accessories&hash=item58929c7b63&vxp=mtr