DonnG03shee

SOLD! Thanks Savage420 for your help.

bump

The pics with the black wheels are the most recent, although it has 22x11x8 haulers on it now instead of the 25's shown in the pics. This bike runs very fast for a 4mil and I think the price is very resonable for everything that it is. Title in hand!

Bump

2003 limited edition Banshee 421 cheetah cub (full drag port) by Passion Racing brand new Hot Rods 4 mil crank brand new 68mm weisco pistons White Knuckle head with custom domes Boss intakes with V-force 3 carbon fiber reeds dual 40mm Dennis Packard alcohol carbs with gas and alky needles (on gas now!) mechanical fuel pump PVL ignition system 3 inch lowweering kit Matt Shearer out of fram chrome drag pipes Direct Drive lock-up clutch with polished billet side covers 22x11x8 10 paddle haulers 21x7x10 Skat trak smooth buff Mod Quad aluminum drag axle and carrier +10 swingarm MUST SELL $3900.00 located in Denison, TX (903)815-2966 call or text

This was my 421 banshee that I traded with quadrcr09, it is well worth the $ he is asking for it, if you don't think it's worth it try building one that is this quick. This bike run side by side with a "twister 611cc motor built by Loui that was putting out 111hp on gas, this motor is not your average 421, it has countless hrs of port work and dome work put into it, not to mention all the dyno time to get the most out of it. Who ever gets this bike will not be disappointed! :cool:

since there were no hits my bike, i'm keeping it. thanks Mike for posting it. I'm installing a set of one-off out of frame drag pipes on it in a few weeks. See ya'll at the dunes. Wes...let me know about your bike and if there is anything I can do to help.

Trash the "CHEETAH" and go with the "CUBS" and 4mil. Problem solved!

Yea, stretch those cheetahs legs out Bro. Just put it back together and ride it like you stole it. See ya, Hellride96.

Thats a really good deal, but out of my reach at this time. Thanks anyway for the reply. I did talk to jim at passion racing, really nice guy and very helpful too. I decided on the cheetah cubs and 4mm crank, seems to be more suited for the type riding I'm doing, and cheaper. Thanks again for all who replied.

does that come with the cylinders also? What size carbs? If so how much? on a budget. Also I'm about an hour north of Dallas Tx.near lake texoma.

Thanks for the info, I think I will do the cheetah cubs and 4mm crank. Where is the best place and best price for the cubs and crank? thanks again for the replies, everyone has really been helpful.

My 03 shee has a set of 68.5mm bore drag ported cylinders, pj34mm carbs,cool head with bid bore domes,V3 reeds & vito fat bastard pipes. I could trade my cylinders & carbs plus 350.00 for a set of cheetah cylinders with pwr valves & pwk35mm carbs. The cheetah cylinders need bored and a new top end, or should I just go with a new set of cubs ported for 4mm crank and run the stroker kit? The cheetahs are not ported for stoker. What is the best for drag racing?

my brother just installed a timing adjuster on his buddies banshee and had the same problem. We pulled the flywheel and found a wire that had been rubbed and grounded out by the flywheel. maybe this will help.

I have a set of cheetah cylinders with a standard port job. Can I run a 4mm crank and spacer and benefit from this or am I just wasting my time and money? One person said I could. One said my port timing would be wrong and would not work.