HULKAMANIA

TTT

Up for sale is my 2003 Yamaha Banshee. I hate to sell the machine but my daily driver car the engine blew up and has forced me to sell this to relace something that I have to have. I am the second owner of the machine. I bought it from a guy in Oklahoma a few years back and honestly havent ridden it enough to justify owning it, or how much money Ive put into it. It has a -2 Lonestar swingarm with the honda style bearing carrier. +2 Lsr a-arms, with a +2 dura blue axle, so this machine is very stabile. I currently have FMF fatty pipes and silencers on it, which arent rusted and are in very good condition. It has a fresh 4 mill stroker crank, as well as a 12 port-port job from Passion Racing out of Tulsa Oklahoma. This port job alone cost me around $750. Theres very little run time on this engine, I would guess the hours to be around 4 hours of total run time. It has a cascade clutch cover with the lock up unit on the clutch itself. The stator/sprocket side has easy access panels on both to get to them without taking the whole cover off. It has pro-taper handlebars on it, as well as an AC front bumper and AC nerf bars. As far as suspsension goes it has WORKS double rate shocks with rezzies on the front but the rear shock is still factory. When I did the port job I also ordered a NOSS head for the machine as well but I honestly cant remember the dome size I had put in, Id be lying if I tried to tell anybody. Something else I would throw in with the machine if it sells is a set of motorsport alloy TORK design rims, front and rear with Sand Star sand tires. The tires as well are next to new hardly any sand time on them either. Depending on the price of what this machine sells for I do have a set of 35mm Keihin carbs,steel braided throttle cable,and a Boss Intake for the larger carbs to finish off the potential of this engine. I ran this stuff once, just putting around the shop, but since I didnt have time to fine tune it I pulled it all off and put the factory carbs and intakes back on the machine for purposes of selling it. The carbs, intake, and pod filters are all brand new I didnt buy used. For these items here to be included with the machine it would have to be the buy it now price. Otherwise I am selling them elsewhere. Should anybody want to contact me about this machine it would be easiest if you would just call me at 620-805-9191, my name is Caleb. If there may be a case where someone would want me to meet them somewhere for partial delivery depending on how far I may be able to work something out with some sort of compensation for the cost of fuel. Again I hate to sell it, but I need an engine in a car more so than I need a four wheeler sitting in the shop. If you have any questions please dont hesitate to ask. I do reserve the right to end this auction early since I have it posted on various websites as well as locally. THANKS FOR LOOKING!!! LINK TO EBAY FOR PICS: http://cgi.ebay.com/ebaymotors/Yamaha-Banshee-350-YAMAHA-BANSHEE-2003-4MILL-STROKER_W0QQcmdZViewItemQQhashZitem4aa007c1f4QQitemZ320512442868QQptZUSQ5fmotorcycles

If it was possible Id work a trade with you on my 03 Banshee 4 mill passion racing 12-port. Im in southwest Kansas I dont care about the title thing.

http://www.autotrader.com/fyc/vdp.jsp?ct=p&car_id=267087027&dealer_id=64501883&car_year=1997&rdm=1252204758545&num_records=25&systime=&highlightFirstMakeModel=&start_year=1981&keywordsfyc=&keywordsrep=&engine=&certified=&body_code=0&fuel=&awsp=false&search_type=both&distance=10&marketZipError=false&search_lang=en&showZipError=y&make=&keywords_display=&color=&page_location=findacar%3A%3Aispsearchform&min_price=&drive=&default_sort=priceDESC&seller_type=b&max_mileage=&style_flag=1&sort_type=priceDESC&address=67860&advanced=&end_year=2010&doors=&transmission=&max_price=&cardist=0&standard=false Item Price: $8500 Description:I hate to sell this truck but the job I just took requires me to do alot of driving and I need something more economical as far as fuel/room goes. Everything works on the truck, I have only had it for about 3 months and I really do hate to sell it. It drives out nice, and runs smooth. It has 77,700 original miles on it, with a 6" fabtech lift kit. The tires on it are brand new they are 35X12.5X15 BFG's. It has new brakes and shoes on it, and I just repalaced the windshield wiper motor last weekend. I took pictures of the two blemishes that the truck does have. There is a minor ding in the driverside right behind the door, and on the driverside door panel inside, all done by the previous owner. The rims on it are aftermarket and do look pretty nice on the truck. The a/c works extremely well! The hood does have a few scuffs up towards the front cause the previous owner put on the wrong type of bug deflector I was always gonna put a new one on it just havent gotten to it. I put brand new headlights in it with new side marker lights as well, the old ones were just a bit faded. The history report all checked out perfect when I bought the truck, no reports of anything fraudulent. If interested in the truck please call me at 620-805-9191 or email me either way and I will get back in touch as soon as possible. Any other questions about it feel free to ask me. It does have the 3rd door as well I forgot to mention that. Overall its a great truck, like I said just not the best thing for me right now putting alot of miles in on the highway so Im gonna have to opt for some smaller car. The title is also clean and clear there is no lein.

I will try to get some pics taken of the stuff today.

Will consider ANY reasonable offers!

Hey guys I have some items up for sale. I used all of this stuff ONCE for 30 minutes and Im done with it. Im gonna put the factory carbs back on it killed my top end so its just not gonna work for me. I have 35 PWK's, an aluminum air box with uni pod filters, a braided steel throttle cable, and the boss 35mm intake. Everything was purchased brand new with the exception of the pod filters. EVERYTHING shipped $575 Please dont ask me to seperate the parts I just want to pull it all off and sell it the way it is. Also the aluminum air box comes with the boots for the largers carbs. If interested contact me at [email protected] Thanks

PM sent

After doing alot of researching I am finding out that I dont want to do the single carb set up on the engine that I have. If I could find a dual carb set up then I would do the trade. Id need at least 33-35mm carbs.

I have a set of like new sand stars on Tork motorsport alloys. Its a complete set front and rear, yamaha bolt pattern. I dont run them anymore so I need to get rid of them. Id like to trade for a complete set up of a single carb intake for my banshee. I dont have any experience with the single carb set ups but from what I read they bring out the bottom end and some of the top end? Anybody have anything let me know.

TTT

Hey guys I am wanting to sell my complete set of front and rear Sandstar tires mounted on Tork style Motorsport alloys. They are both in great shape. The tires have at most 10 hours of ride time on them, and the rims have even less. I just dont use them enough to justifiy using them, I like Gheckos myself anyway. I have pictures if anybody is intersted. Im located in Southwest Kansas if anybody is interested. My email is [email protected] or if you want to call me its 620-805-9191. Id like $350 obo for the complete set. It does come with the new lugs as well. Any interest dont hesitate to get in touch with me.

Hey guys Im in the process of looking for some larger carbs for my banshee to open it up with the stroker kit. Im wanting to find 33mm up to 35mm. If anybody has anything and is wanting to sell them please let me know. Thanks

bump

Hey guys Im wanting to sell my set of motorsport alloys and sand stars. The set is all in great shape, the tires have maybe 6 hours total on them. I just dont know if Im gonna be doing much more sand duning so I might as well sell them. If you are interested please get in touch with me. The rims brand new are 400 dollars, so for the whole thing Id like to get $500 thats for the rims and the tires. I would be happy to send anybody interested pictures, I typed this all up then I realized the pictures are too large for me to post here. Email me at [email protected] Thanks

I want to find a nice set of front black fenders for my 03 banshee. I want to find a set that is uncut also. If anybody has anything you might email me and tell me what your asking price is. It would also be awesome if they had the 03 stickers on them. My email is [email protected] Thanks

To the top

Bump

Hey guys I have a set of used Paul Turner mid pipes with the silencers. They are used, but they were used by the previous owner I only ran them once when I brought the machine home. They are in decent shape, no dents, but there is one spot on one of the expansion chambers where the nickel plating has came off, its a small spot but I want to be honest. If anybody is interested in pictures email me at [email protected] and I will get you some pictures tonight. For the pipes and silencers Id like to get $300or best offer. Thanks

That sucks man we are in the same state but wanting two different things.

Hey guys Im tossing the idea around of trading my 88 250R for a banshee, but theres a few stipulations that it would have to meet. First heres the rundown on my 250R. Its an 88 model, new plastics, seat cover and new burgard + 2 a arms, and I put a rpm dominator +2 axle on it. It has a 330 big bore stroker, LRD pipe and silencer, new itp .190 rims all the way around for both mx tires and for sand tires so theres a total of 8 new itp .190 rims. The banshee would have to be newer than 91 cause I honestly dont want a J armed banshee. I would want it to be widened meaning I want the +2 I just dont want to go back to a stock stance, and I would like to find one thats stroked. I want to do alot of duning and such. The suspension on my 250R is still factory and in good shape but I can see where someone would want to update. The frame is powdercoated white. If anybody wants to see pictures and is interested email me at [email protected] Also if you have a YFZ 450 I may be interested in this as well. If you have any questions or thoughts dont hesitate to ask.

I will keep that in mind, what kind of shape are they in? Are they factory or aftermarket? Lol keep the parts list rolling.

I am in the process of restoring a 1991 LT250R for a buddy of mine, and Im just wondering if people here have any parts laying around they would like to sell. What Im really needing is the electrical parts, such as the keyswitch, the killswitch/lightswitch, and possibly the wiring harness itself. Id really like to find a harness that has all of this put together but thats probably swinging for the fences. I know this is a banshee site and yes I do have a banshee lol this is just a project Im working on. So if anybody here has LT250R parts, anything at all post it and say what you got, I might be interested in anything at this point. Shocks is also something we are needing, if we could find some nice works used for a decent price we may go that route. Thanks for looking everybody and replies and help would be greatly appreciated.

If its not Klotz Super Techniplate, then its not being run through my machine plain and simple.