STREETSWEEPAZ

I had some stripped Phillips screws on the engine crank cover - I would like to replace them - 4 or 5 needed / will buy all if needed......... I seem to have lost my reeds & cages - Would consider anything aftermarket . I have a cracked Plastic grill housing - Need that & the Grill - Aftermarket is fine............. Seat Cover -- I prefer a Black or a Dark charcoal grey seat cover -- I have a Ceet one with some flames on it & It dont match the quad anymore......... Willing to Trade ???????? Any links to some bad ass graffix kits would be appreciated ......... Thanks fellas ,,,, Please Email me with what you have - I do not frequent the site that much - [email protected]

I have a 87 that i blew up a few years ago ...... I took it down to every nut & bolt , Cleaned & painted or Powdercoated all of the steering & suspension ,,, I have been slowly rebuilding whatever i can on it since then .... It is not fully assembled but it only needs a few parts here & there to complete........ I just got done painting the plastics 2006 Hummer black mica with Black , Gunmetal & Silver flakes with added flex agent so it will withstand some beating & flexing .......... Had to race cut them but,,,, I did a nice job on them - no jagged shit .. The frame is Kandy violet over Hot pink pearl bascoat with fuscia flake & Ice pearls..... Good shocks off of a newer banshee - Painted Black , Stock swinger painted black Steering & suspension components are powdercoated chrome but it looks like polished aluminum to me........ Buffed & Hand Polished Parts: -Nerfs -New front bumper -Engine case cover -Brake master cylinders ect Engine: Lower end has been gone thru last year & is rebuilt to stock spects. Top end needs rebuild kit but ,,, I now have A set of Ported cylinders with transfer ports @ 64.5mm New Kick gear done Misc add ons: Pro Taper Hi rise bars Twist grip throttle & extra set of carbs with Tors removed ... Newer ITP wheels with 18'' Holeshots in rear - Stock YFZ or so in front . Ceet seat cover Needs: Rebuild kit A set of matching pipes A set of good reeds A Cool head or something would be nice / I only have the stock one. I know it needs work but the quad is Real Clean & needs to be finished...... I am located here near Superior Wisconsin ........ I Would like to pull at least $1400 for it but money talks ,,,, I want a 4x4 - I bought a 07 Suzuki LTR450 so i never bother with the banshee anymore............. Any reasonable offer will be considered .....

Harley tanks:

I think you sent me a pm a little while ago but i erase most my PM's ..... Here is some recent things i have painted ....... I am doing my plastics right now Enjoy: 06 300C

You have to scuff it witha red scotch brite pad , Clean with mineral spirits or paint prep , &then ise Bulldog Adhesion promoter & FOLLOW THE DIRECTIONS ON THE CAN !!!!!!!!!!!!!! Light & Misty coats are better than 1 thick one because a thick coat wont dry & it will be gummy............ PAINT AWAY !!!!!!!!!!!!

Well,,, I wont take $500 ........Since it sounds like this is a sensitive subject in the making , I guess i have to put up some sort of price now that you mentioned it so ,,,,,,,,, I guess i will need over $1000 for sure......Everyone knows how much $$ goes into a machine when you build it - Even if i didnt put in a stroker kit & whatnot............ I am making some progress on the machine & doing what i can until i find whatever else needed for it .... After that - The price keeps going up ....... I have pulled the plastics off & prepped them for some fresh House of Kolor paint........!!! The plastics will be HOK black Pearl with some chrome flakes & some ghosted smoke flame airbrush work .......... Similar to this -- Only with More pearl like white for a more transparent look / that appears in different angles of the sun ...........

Sorry ,, I have that into the lower end alone............. I need more than that . This is what sucks about building something up - You never get what you put into it........ I just took the wheeler in the garage to mess with it ...

I have my 87 that I would like to get rid of someday - I was trying to get all the parts together first but,,, I dont havethe time or energy to put into it & make that happen......... I took the banshee in my house a few years ago , had the frame custompainted candy violet over pink pearl basecoat with flakes & ice pearls... The supension & steering were powdercoated a chrome color...... I picked up some ported cylinder heads for it -they have transfer ports , ect & were done by someone in Florida i believe........... Newer ProTaper hirise bars, new front bumper , has nerfs , The lower has been gone thru already & is ready for the top end........ Plastics are cracked in front but rear is nice...... shocks are good , cluytch & that was redone right before i blew it up ........ I did a trade for the quad & the previos owner beat it right before i got it ....the first day i rode it - I knew it was going to blow up due to the smokeon one side.........I may consider parting it out if i could get rid of the majority of the parts in short time........ I want to buy a 4x4 quad asap.... LMK by email - [email protected] & Thanks for your time , BOB_T

Just picked up some Ported cylinders & Plastics ........... Thanks for the emails guys

^^^ I appreciate the replys guys ....... I am not on here that much so bare with me if i dont get back to you right away ....... You can send me some pics to : [email protected] I can be reached thru email alot easier than on here, thanks

I need a boost bottle as well.......... I can custom paint a set of plastics or whatever for good trade.......... I have plenty of pics & refs.........Here is the last set of haley tanks i did .....LMK

Thats About it , I am looking for cheaper stuff so i can toss them on my quad so i can get rid of it ............. Will consider plastic colors except white , yellow , or red

^^^ Appreciate it guys ,,, I had too splurge a little bit on my car build today but,,,, I will be finishing up with painting a car by the end of the week so ,, I will have plenty to spend then..................... Please email me - As i dont get to frequent the site that much ....................

^^^ Yes i am ................ I am looking at the lower half of my engine & i can see some small chunks of piston in there so ,,, Imma have to split it apart i think ............. The rods & that are still good so ,,, I dont think I want to replace them just yet ........ I have a lead on a swinger but,, its one of them ebay people -- I been shiested by one so im skeptical ................................. Is it true that I amprotected fully if i order with my credit card & if the person turns out to be fraud - my CC company will refund my money ???????

I am in need of these parts here asap .......... Cylinders : Stockers or Overbore will do ......... Over .60 is questionable,,,,,,, Pistons : Im sure i will just order a kit but,,, If someone has something oversized - Feel free to post Swinger : Nice stocker to a 4+ Chrome or non ,,,,, Light cosmetic damage ok Plastics : I will entertain whatever colors you have..........( I have a Kandy Magenta frame to match it to ) get ahold of me Via Email @ [email protected] - Thanks, BOB_T

I always wanted another 70's Cutty ............. I had a 71 like your s there when i was 15 - Paid $150 for it - Ran & Drove Great !!!!!!!!!!! Body rusted but it was decent still ......... Back then - that amount of rust was way too much fr me to handle , 14years later - im kicking myself in the ass........... I will pick up a 72 Cutlass Supreme / Convertable when the time is right ........ You should be able to sell it if you advertise locally - The Big Rim craze is in full swing down south - Advertise it down there in an Auto shopper -- Your on a Banshee site / Not the IDEAL site to sell a car

ttt email me : [email protected]

You have some drag ported STOCK cylinders but the measure .60 over ???????????????? Send somebody somepics - its not hard to post them up - Just upload them to tinypic.com or somewhere & copy the img tags...........

I am in WI - I just sent you a Email................

Im hardly on here email me : [email protected]

TTT

I have been on here for awhile & i have asked multiple times but,,, I just flat out forget about the pile thats in my backyard................ It can sit & rust for all I care but,, i went thru all the hassel of painting the frame custom & powdercoating everything.............. Thats the only reason I want to finish it or I would have junked it out . I dont have paypal anymore - I was screwed over from that pile of shit company - No seller protection from scammers !!!!!!!!!!!! I dont know what to do as far as sending a payment other than COD ............. I just ordered some car parts from California on COD & It went smooth...............:biggrin: I custom paint helmets & stuff like that............Will trade a mild paint job for some cylinders ...... that for something .......... Here is a Link to some of the things i have done for the owner of Fourwerx motorsports: http://www.fourwerx.com/PHP-Nuke/modules.p...topic&t=319 Others: I have excellent feedback from these guys & im willing to paint whatever - From a toilet seat ( & I can paint some mean ones !!! ) to Harley tanks & tins....................... BOB_T

$50 shipped.............. ?

Are they stock or bored over ???? I dont know much about bore sizes & the measurements ...... PM me your asking price on them cylinders will ya ?

What side is the cylinder that you have ??????? (if you were looking at the engine staright into the carbs)