Jump to content

digger

Members
  • Posts

    33
  • Joined

  • Last visited

Everything posted by digger

  1. just use a little high heat silicone, or gasket maker of some sort. it doesnt get that hot that far back so almost anything will work.
  2. are u sure that the chain is actually stretchin and not u'r adjustment comming un adjusted? just a thought.
  3. has any one ever heard of the "iCat" it a small electronic device that goes between u'r coil and ur spark plug. its suposed to give u better spark and and give u more power and throttle responce.... I read about it in QUAD magazine and they tested it on a 450R and said it was awesome.... whats u'r oppinion???
  4. the motor is completely stock on my banshee, i got tr6 pipes, toomey 2:1 filter, booste bottle, 4* timing key and boyesen reeds, i want to get a cool head or some sort of after market head for it, what head should i get, what size domes would be the best? i still want it to be reliable, also has any one found the perfect porting for the tr6? thx for u'r help..
  5. u can buy thinner clips for the needles for finer adjustments
  6. I'v tried 280, 300, and 320 mains and the thing will still not rev on top end, air filter is brand new, not dirty. the plugs look like they are burning perfect with the 280 any other sugestions... i just got beat by my buddies almost stock 450R and i cant have that!! and its not the rider cause we traded bikes then i beat him. Please help!! toomey tr6 toomey 2:1 uni filter 4* timing key boost bottle boyesen reeds
  7. i've heard a lot of people say that they run a 32:1 mixture, is this a safe thing to do, i am new to banshee's and i dont want to lean it out too much and blow it up. right now i run it 24:1 like the manufacture sugests.
  8. i have a 2005 banshee that i put t6s on. its got a 280 main, stock pilot, and needle on the fourth groove, and air screw one and a half turns out like toomey says. the bike pulls fine up untill 5th gear, but will not rev in 6th like it used to, i used to be looking for a 7th gear with the stock pipes, now it seems like 6th is too high a gear. i ride at sea level, in the winter, it can be 20 degrees F. and in the summer up to 85. i have a booste bottle, boyesen reeds, and a 4 deg. advance timing key, and the toomey 2:1 intake with a UNI filter. any sugestions on what i can do to get more top end revs???????
×
×
  • Create New...