peterlocal22

used a zip tie, works great. just incase some one else needs to know

almost finally done my front end transformation. Just waiting for a couple more parts.

I need to get some new pipe clamps for my banshee and I was looking at TM Design pipe clamps. The ones that heat up and expand. I believe there called mellot exhaust clamps. Anyone run TM's Pipe clamps or did at one time? there expensive so i wanted to see if there worth it or not thanks

Hello, Im from the New England area and I had rocket pipes but im changing over to Toomey T5's. My set up with the rockets is as follows: Toomy T5's, Delta V Force Reeds, 310 main jet, Adj. timing plate, Uni Filter w/ Pro Flow Plate. Do i need to change anything like the jetting when i switch to the t5's or am i good to go? thanks

tire wire, good idea never thought of that thanks

twice on the same thread you said that. you need glasses more than coffee, just kidding buddy thanks for the respnse

hello, just got some ball joint boot replacements for my banshee. just wondering how i get the clip secured that came with it? do i need a specal tool to put it on or do i stretch it and spin on? thanks

Has anyone replaced a ball joint boot before? just wondering what it consists of? any instructions would be great. thanks

are the upper a arms the same boot size as the lowers? thanks

hello, i put a good size slice into the rubber boot that protects the ball joint in my lower a arm. not sure what to do about this. any advice would be appreciated. thanks

does anyone have a set for the t5's that they can get some measurements off of so i can then go measure mine? thanks

Ben, when i get back home tomorrow i will look it up in the banshee repair manual. im nit sure ut it might be in there. if yo think of it throw me a reminder message tomorrow afternoon so i dont forgot. thanks peter

I ordered some cascade pipe clamps for my Toomey T5's. Just got them in the mail but the package says there for SHEARERS. Do Shearers and T5's both run the same size pipe clamps? Thanks for any help.

whats up everone, just wondering if anyone has or has had or tried out Works G series shocks. There gold with red and black springs. If you have could you tell me pros and cons and if you would recomomend them. thanks

i believe that Ben's new shocks are more like 16-5/8 and hes using the yfz spindles.

on the one that doesnt fit, unbolt the silencer from the stinger, then keep the stinger in the same location and rotate the silencer a bit and then screw back into the stinger tube but at a differnet position than originally started with. Continue to try this until you have done a complete 360 rotation of the silencer and your back to the same spot as you started with. Let me know if this doesnt work or let me know if what im saying is unclear? im bad at explaining things, lol. good luck, peter

If I were you I would keep looking because there are some really freat deals out there. I know its tough because you probably just want to buy one and start riding it. However believe me because I know first hand, take your time and find a nicer one for the same price. good luck

sweet let me know what happens im looking to do the same thing

nice job, do you need to run yfz 450 rotors, caliper and master cylinder when you use the yfz 450 spindles and hubs? or can you use the bansahee calipers, rotors, and master cylinder w yfz 450 spindles and hubs? thnak

man by the time your done you have $70 invested in hangers, $40 in pipe clamps then add your insane shipping costs. were does it end? thanks for everyones help

maybe im loosing my mind but the bolt is to big for the silencer frame mount. Should i reem the hole on the t5 silencer mount? maybe im trying to install them at the wrong point but i dont think so? anyone have any pics of there toomey t5 silencers mounted on there bike. maybe i need some type of hanger, i dont know i bought them used so theres no instructions. i figured they would bolt up were my old rocket silencer bolted up. thanks for any help

Whats up everyone, well I got a set of spacers from Brian, or as the HQ knows him 2003LimitedBanshee. Let me first start of by saying he was upfront with me the whole time. (plus #1) Told me he didnt think he would be receiving the spacers until Tuesday after Memorial Day. However they came early on Saturday. Most people would say "ok Ill send them out Tuesday like I said." Not Brian, he actually got them out the same day he recieved them. I really appreciated it because this meant I would beable to get my bike back together even earlier that originally thought. (plus #2) Now I get the spacers day earlier than thought and they look awsome. I then put them on the bike and they fit perfect as if hes been produceing these spacers for years. (plus #3) I highly recomemend doing business with Brian. If you have yfz 450 a arms on your Banshee you need these spacers, trust me. They make the whole kit cme together. Now if you dont have 450 a arms yet 2003LimitedBanshee has the kits already made so you can just bolt them and go. Thanks alot Brian Peter

Whats up everyone, well I got a set of spacers from Brian, or as the HQ knows him 2003LimitedBanshee. Let me first start of by saying he was upfront with me the whole time. (plus #1) Told me he didnt think he would be receiving the spacers until Tuesday after Memorial Day. However they came early on Saturday. Most people would say "ok Ill send them out Tuesday like I said." Not Brian, he actually got them out the same day he recieved them. I really appreciated it because this meant I would beable to get my bike back together even earlier that originally thought. (plus #2) Now I get the spacers day earlier than thought and they look awsome. I then put them on the bike and they fit perfect as if hes been produceing these spacers for years. (plus #3) I highly recomemend doing business with Brian. If you have yfz 450 a arms on your Banshee you need these spacers, trust me. They make the whole kit cme together. Now if you dont have 450 a arms yet 2003LimitedBanshee has the kits already made so you can just bolt them and go. Thanks alot Brian Peter

Ben your set up looks great. I cant waite to hear how the test runs go. I should have my front end done by this weekend as well and hopefully some test time too.

thanks brian, cant waite to get them