blueshee

Sold the banshee and have these parts laying arround. Graydon Proline 2ito1 intake with airbox and 35mm pwk in excellent condition. also k&n filter that i ran. (I did not use the airbox on my bike. http://cgi.ebay.com/ebaymotors/Graydon-Proline-2into1-intake-35pwk-k-n-uni-banshee-/150658888814?pt=Motors_ATV_Parts_Accessories&hash=item2313f8346e Toomey Hush kit spark arrestor in great shape. I only used it for maybe 3 rides. http://cgi.ebay.com/ebaymotors/Toomey-Racing-Hush-kit-Spart-arrestor-banshee-/150658890444?pt=Motors_ATV_Parts_Accessories&hash=item2313f83acc

A friend of a friend did the port job. He actually did very good. my bike ran very good before I put the single carb on. the 50 hp was with the single carb. It was way faster before. I think Ill buy another 35 pwk and run two.

So, I installed the timing plate at +4 and it made a world of difference. Then I put the graydon 2 into one with a 35mm pwk and it runs like ass. I figured the dyno would get it figured out but here at gordons wells its running like ass. it seems to me like it is rich, but I pulled the plugs which were a nice chocolate brown before, and now half of the porcelin is chocolate brown and the other half is white-ish, yellow. this is with 210 main, 50 pilot, dek needle at middle clip, 1.50 out on air screw. with the stock carbs the bilke ran like a raped ape, now after putting the single carb on, it runs like it did before it was ported. front wheels dont even come up. please help cause im getting beat by 450s that I used to smoke. Sorry if i dont make much sence but I have a few beers in me. by the way, I already tried a 200 main and It doesnt seem much diiferent

well i took it to the dyno yesterday. Mods are whatever is in my sig and +4 timing, graydon intake with 1 35mm pwk. ended up with 49.15 HP and 30 ft. lbs. torque. I took the bike in jetted at 200 main, 50 pilot, dek needle at middle clip, 2 turns out on air screw. He ended up putting a 210 main and left the rest the same. It seems to me, it was snappier before with the stock carbs but I guess ill find out for sure this weekend at the dunes. Im leaving here in a few hours. Ill post up when I get back

Do the garbage can thing or use your bathtub. It could possibly be leaking at the rim where it is welded together. I have one that is leaking from the weld that I need to fix

BTW.. Are you the one that won the Graydon intake with aluminum airbox and uni-filters? If so good deal! thats me. how much did these go for new

I won an ebay auction on a graydon intake setup and am now looking for a carb for it. I found a 38mm lectron on ebay and am wondering if it is too big for my setup. Also are there any jets to change on lectrons or is it completely externally adjustable? If I dont get this Ill probably just order a brand new 35 pwk. I just need some quick answers in order to make a decision. Thanks in advance.

so i decided to do a carb swap before paying to get it dyno-tuned. I found a graydon manifold, airbox, and two uni filters on ebay and won the auction since im kind of on a budget, i figured one carb will be cheaper than two. So now I need to get a carb and am wondering what size would go good with my setup. If the 2into1 guys could give me some advice I would appreciate it. Also I was wondering if I need a high flow fuel valve since one carb will be doing the job of two. thanks in advance

anyone know what bikes had pwk 33s stock. by chance, is a 95 cr 125 carb one thanks in advance

So Im thinking ill try to get a set of pwk carbs sooner than later. Anyone know where I can get a good deal on them. I suppose I also need to get new intakes and pods. Do I need a new throttle cable. If anyone has a set of used 33mm pwks that you want to get rid of let me know.

Thanks for the input guys. Carbs are definitely next on the list. Dave, so are you saying more timing will give me more power, but less reliable. I mostly dune the thing with a little hill shooting now and then. I deffinitely want it to be reliable. Do you think +7 is reliable, or should i go +6 to be that much safer

Dune season is almost here, so I wanted to do a little more to my shee before the first trip. I ordered a timing plate and it should be here in a couple days. I am wondering where I should set it to for my setup. I will also, hopefully find the time to go get it dyno tuned before the trip, So If you guys would like to guess my horsepower, Ill post up with the results. Here is my mods list. .040" bore .030" milled off the head (175 psi compression) aggressive dune port stock carbs with k@n pods vforce 3 reeds toomey t-5 running 50/50 110 race gas and 91 pump timing plate will go on this weekend (suggestions on how much timing?) thanks in advance for any suggestions

If you have fiberglass, yes you will clear 33s.