FASTOYS
-
Posts
2,539 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by FASTOYS
-
-
They should work fine but always check with the guy that PORTED your mtr as he should know best. They look smaller than 34 to me but maybe not.
-
During the month of Jan. All cylinders/motors SENT DURING THE MONTH OF JAN. for porting of any kind, we will be offering a bore/hone job at half price!!!! A $50 Savings
-
If this is what you want " personally , i mostly ride the dunes and bowls but also like to hillshoot".......
Then i recommend looking into a well tuned Serval !! Good sale on them in our sig. below.....
-
Still got some left and another week left to grab em!!!! : )
-
Sounds good! Time to make use of our Sale in my sig.... : )
-
Thanks guys!
Yes Paulie, it makes it nice too, getting everything at one time from one place AND an HQ sponsor as well.
-
Someone would love this thing..Very dependable and very F.A.S.T. !!! Hard to build them for that with all those goodies $$$$$.. I've seen this bike beat on some DMs and other bigger builds.
-
33S Work great on a play mtr. especially a stock stroke... If you have a 4mm stroker or are looking for more mid-top end hp then 35s will pick it up a tad.
I see you have our porting feel free to give us a call to discuss it if you'd like..
-
Nice post Jeff!!! So what is your price? On average how much longer do your clutches last?
not sure how much longer than brand x but i know on high hp bikes we have had them last well over a season (year). My 10 mm Alky bike had our same clutch for like 4 years and countless runs.
-
Thanks, Our F.A.S.T. CLUTCH is $99.95 http://www.farmandsandtoys.com/partdetail.asp?partid=34
I beleive the Tusk clutch is $50. Dont get me wrong , if you can only afford that much then it is what it is... We too can get cheap clutch kits but they have fibers just like the Tusk that flex a bunch when you twist them, and are very thin on contact area (tabs that go in clutch basket and cause wear). : (
If you want a cheapie clutch ask us for one, but we do not recommend or have them on our website, as we prefer to do it once and do it right !
Tedder (a well respected site member) has run many many many of our clutches as he likes to try different things in 1/4mi setup... He has told me many times that he likes ours the best out of all of the many he has tried.
-
This is to compare our clutch kits vs. Tusk. We are not bashing the Tusk clutch kits we are just comparing them side by side to ours. A lot of people want the Tusk kits because they are cheap but hopefully from all this you can see why we don’t recommend them.
Picture of the F.A.S.T. and Tusk frictions side by side. You can clearly see our frictions are thicker and stronger on the tabs that go into the basket. This is crucial for less basket wear and grooving because the load is spread evenly throughout each tab. Also added rigidity to the entire friction.
Picture of our heavy springs vs. Tusk heavy springs. Notice how our springs are taller than the Tusk. When installing the Tusk springs the clutch bolts will thread almost a ¼ of the way in without even compressing the spring whereas on ours you have to “preload” the springs per say to start the clutch bolts. What this does essentially is give you more spring holding pressure.
F.A.S.T. steel vs. Tusk steel. Notice the Tusk isn’t full like ours which give you less clutch apply area.
F.A.S.T. vs. Tusk (friction thickness comparison) Longer clutch longevity!
F.A.S.T. vs. Tusk (friction width comparison) More clutch holding area!
F.A.S.T. vs. Tusk (tab width comparison) Our clutch fits tighter preventing less wear on the clutch basket from the tabs slamming back and forth when you dump the clutch. Allows for smoother clutch disengagement as well.
F.A.S.T. vs. Tusk (tab thickness comparison) As stated above in the first picture, our frictions are thicker and stronger on the fingers that go into the basket. This is crucial for less basket wear and grooving because the load is spread evenly throughout each tab. Also adds rigidity to the entire friction. The #s speak for themselves!
F.A.S.T. vs. Tusk (friction width comparison) More clutch holding area!
F.A.S.T. vs. Tusk (side by side comparison)
-
They are Super fun motors!!! Grab the good deals while they are hot.....
-
Still time to call/email for that special someone and get them a F.A.S.T. CASH Gift Certificate..
We can email them to you so you still have time to put them under the Christmas Tree!
Happy Holidays
Jeff
-
This sale will be good through Jan. 11 or until we run out of stock!!!!! This is JUST for 421 Servals but we will match anyone's advertised price on Servals or Cubs!!
4mm Serval Kit: $925 (Includes cylinders w/clean up port, pistons, base gasket, stud extenders, water plugs)
http://www.farmandsandtoys.com/partdetail.asp?partid=403
Hot Rods 4mm Stroker Long Rod Crank w/Our Extra deep penetrating Weld: $399
http://www.farmandsandtoys.com/partdetail.asp?partid=78
Cub Domes: $75 (Any size of your choice or recommendation by us)
http://www.farmandsandtoys.com/partdetail.asp?partid=135
F.A.S.T. Head: $170 for Silver (For colors add $20; available in black, blue, red)
Silver - http://www.farmandsandtoys.com/partdetail.asp?partid=183
Black - http://www.farmandsandtoys.com/partdetail.asp?partid=387
Blue - http://www.farmandsandtoys.com/partdetail.asp?partid=454
Red - http://www.farmandsandtoys.com/partdetail.asp?partid=386
Keihin 39mm PWKs: $345 Pair
Keihin 33-35mm PWKs: $295 Pair
http://www.farmandsandtoys.com/partdetail.asp?partid=351
33-35mm Billet Intakes w/Built-In Crossover: $130
http://www.farmandsandtoys.com/partdetail.asp?partid=465
Don't forget to check out our eBay special on V-Force 4 Reeds as well!
http://www.ebay.com/itm/330854028148?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
HOPE EVERYONE HAS A MERRY CHRISTMAS AND A HAPPY NEW YEAR!!!!!!
Expect more specials coming in January also... : ) -
Whoever buys these please contact me for help assembling w/correct components, domes, timing, fuel, etc....feel free to send them to me and i will make sure they are ready to run!
-
Thanks guys ! Appreciate it ! Have a Happy Thanksgiving... : )
-
Call me
-
15 Hrs launching with a 10mm Serval is alot of pounding on a clutch w/no lockup!
-
w/a 10mm Serval, our clutch with NEW inner and outer hubs and HD springs will hold for awhile BUT you will need a lockup eventually, especially if doing a ton of dragging/launching on pavement.
-
33PWKs may be good for your application..... !?? They work good on alot of our setups for MX or Woods bikes wanting hp everywhere.
-
Not a fan of aftermarket stators/flywheels... Seen several quit when least expected and several aftermarket flywheels come apart. : (
Tors removal kit is great, parking brake block off is good, this would be the time to install a timing plate....Check out our site for more ideas..
-
No biggie, There is roughly 20 links per foot. 20 links x 6 ft = 120 links Plus we usually throw an extra link or 2 in there for good measure.
So If we sold 6 foot ( which is roughly 120 links) according to your calculations he would have 5 links EXTRA, NOT 3 pins too short. PLUS whatever extra we throw in .
We have literally sold Hundreds of chains and none were too short. We'll keep doing what works for us.
-
What is the chain lenght for a +4 swing arm
6 foot Not for sure on lengths as we sell it by the foot..
-
Some real good parts in that mtr for sure
!!! Made great power for a Play Port!!! Good luck with sales... bump
Porting/Boring Sale $$$ For January
in Sponsor Spotlight
Posted
During the month of Jan. All cylinders/motors SENT DURING THE MONTH OF JAN. for porting of any kind, we will be offering a bore/hone job at half price!!!! A $50 Savings