Balls2Wall

i have 3 sets of tires with wheels, all banshee bolt patterns. please don't ask me to separate the tires from the wheels. I'll post more pics this weekend when i get my camera back. 1 pair "old style" mohawks 21x7x10 on douglas blue label rims. at some point these were run without being tightened down all the way. on each wheel 3 out of 4 holes aren't circles, they've been ovaled by the studs, but i have run them like this with no problems. wheels are not completely straight along the bead, but they both hold air. these wheels do have a weird offset. offset is 4 1/2" deep on outside, 2 1/2 on inside. $175 shipped 2 pairs of 8 paddle haulers 20x10x10 both on douglas blue label wheels. both sets of wheels are in great condition. one set of tires has 3/4" of paddle left with one paddle missing a chunk about 1" long by 1/8-3/16" deep (it's not much i'll post pics later). the other set of tires has 11/16" of paddle left. pics will be posted this weekend. $225 shipped each set

PM SENT

$1200 shipped

Hoping to sell this complete without parting out. i know this will be hard to sell so if someone is interested in complete motor i'll cut you a sweet deal. make me an offer. eventually i'll start parting out if it doesn't sell. started this build, never finished, and have moved on to other things. motor was assembled and has never been run. brand new parts are: hotrods 4 mil long rod crank w/tz bearing hinson basket with straight cut gears direct drive lockout clutch other parts/info: stock transmission pro design adjustable timing plate high output stator ricky stator flywheel shift star & drum mods cases freshly painted

head and used 19cc domes SOLD still available: new 19cc domes used 22cc domes reed spacers vitos pistons

Cubs, cub pistons, clutch cover, water pump, v forces 2s, and intakes, all SOLD pro design head with studs, orings, and either used 19s or used 22s: 140 shipped pro design domes: new 19cc: $40 shipped; 19cc or 22cc (both used): $30 shipped reed spacers: $25 shipped vitos pistons: $25 shipped

bump nikasil is in perfect condition. plugs are included. cubs have a clean up port done by dtr racing in salem, or

bump pm returned

bump. 550 for cubs offers?

68mm pistons, intakes, and vforce reeds sold $600 for cubs

Decided to move on up to the Eastside and some powervalves so this stuff's got to go. everything is off of 421 cub. no dibs. prices do not include shipping. my zip is 97304. if someone wants a combination of parts ill drop the prices some Polished cub cylinders with 68mm bore (will not work with stock crank. set up for 4 mill long rod). the polish job isn't the greatest, but i'm pretty picky. in the pics i've circled a couple flaws, and there are some little scratches from a wrench around the forward nuts that bolt cylinders to case. the head studs are not included. $750 brand new 68mm blaster pistons with rings pins and bearings - $125 pro design cool head. comes with studs, o rings, new 19cc domes, and used 22cc domes - $175 used 19cc pro design domes for stock bore (one was dropped - u can see dent in the picture - but continued using these and it didn't affect the oring seal) - $30 aluminum reed spaers - $25 vforce 2 reed cages in good shape - $85 pro design 34-35mm intake manifolds with no crossover - $150 brand new polished quick change lockout cover. this is not a 1 piece cast, but a stock one that's been modded and epoxied. upgrading to 1 piece cover. lockout assembly, water pump cover, and dipstick not included. - $200 pro design billet water pump $40 vito's super stock forged "ported" pistons and rings. one is brand new, the other is slightly used. they're either .020 or .030 over, but i don't have my caliper right now. i'll post size once i know tonight. i don't have the pins or pin bearings for these. - $30 stock head and stator cover - $10 each (will send pics upon request)

Brand new polished lockout cover with used pro design impeller. don't remember brand of cover. this is not a quick change cover. I bought it like this without realizing it wasn't a quick change so i'm getting rid of it. water pump cover and dipstick not included. $250 + shipping brand new pro design cool head with o-rings and studs (head's been torqued but hasn't been fired so orings should b fine). also will throw in a set of domes (i don't remember which ones are for a stock stroke and which one r 4 a 4mm, so i need to take them to my builder to be sure, but i have 19cc (i think this is stock stroke), 22cc, 17cc, and 16cc (think all for 4mm)). $195 + shipping if i don't have the domes you want 175+shipping kickstarter, stock stator cover, and stock head all in good shape $10 a piece + shipping (will send pics upon request) i accept paypal and will split the fee with buyer. no dibs. the quickest way to get a hold of me is my phone: 503-831-5621 (i probably will not answer if it's out of state but if you leave a message ill call right back)

K&NS, outerwears, and reed cages sold

payment pending on K&Ns, outerwears, and reed cages