Banshee rage

SOLD

Any takers going on Ebay soon

Any takers going on ebay soon

For sale front Billet bumper asking$ 60.00 shipped to your door. PayPal accepted.

Eye to eye is 14 inches center to center.

These are 34mm PJ KEIHIN carbs that have been polished. And they come with caps, slides and throttle cable. And all the jets i have $250.00 or make offer

190lbs rider and they were used with my +2 Leagers A- arms. I rode the dunes and ice in the winter.

Here is a set of Axis shocks w/ adjustable rezzy's. I will be parting out my shee as i tear it down list of mods that will be sold is in my Sig. These shocks are 2 years old with 15 rides on them. Quad was garage kept and was run in the dunes and on the ice in the winter. Carbs will be up next. Asking $550.00 for shocks new they were $864.00 and they come with all the hardware to mount shocks and rezzy's. Or make an offer.

Any takers. Going to put up on Ebay and Auto Trader. Then if no buy will part out

Selling a 2005 Special Edition Banshee. Loaded with the following mods 2005 Banshee Limited Edition Mods: CPI Drag pipes (out of frame) V-Force 3 reeds Billet intake +4 Degree key 409 Big bore mono block- Bored to a 415 Triple port and polished K & N pod filters 35mm Keihen carbs Dirt Digger carbon fiber clutch ITP .190 rimms and Sand Star tires front and back and Turf tammers with rimms front and back Laeger A-arms +2 Axis shocks w/resvoirs RPM carrier RPM Axle +2 +6 extended swing arm New chain Gold x-ring AVS clutch lever and braided clutch cable ProTaper SE bars Gearing-15/39 Compression is 165 Every part on the bike except the motor and pipes are 2 years old. The Pipes are a year old and the motor has about 5 hours on the motor. Every part on the motor has 5 hours on it Reeds, Carbs. The big bore kit is a LA sleave mono block with intake. You will not find a cleaner Banshee already to race. 91.2 MPH on a radar gun. Having a second child and no time to ride anymore. Asking $6000.00 or best offer. If i dont sell it whole will part it out

Sold to Sean. Cool guy have fun in Glamis dude.

Let me know

Here are the Paddle tires and rims. There is a small piece missing from one of the paddles. So you are getting perfect rims and almost perfect tires. Shipped to your door for $80.00 you would pay more than that just for the rims. Douglas red labels and Tiger shark paddles and the piece missing is very small at the very end of one paddle. These tires were up for sale before and guy never sent money. Will post on Ebay soon.

Paddle's and rims SOLD. Still have a set of Stock tires with ITP rims that have been setup for ice racing with woody's studs $80.00 shipped to your door. Will post pic's soon as i get home.

Here are the Paddle tires and rims. There is a small piece missing from one of the paddles. So you are getting perfect rims and almost perfect tires. Shipped to your door for $60.00 you would pay more than that just for the rims. Douglas red labels and the piece missing is very small.

Pipes are sold. Will put up pic's of tire's and rims and paddle tires and rims

Thay are in great shape look at the pic's and can email you more if you like. No stingers thay are just the pipes and i thought that was a good price for them.

Will post info and pic's when i get off work

These our Pro Circuit Platnuim Pipes with Billet hangers and Billet exhaust clamps. Pipes are in perfect condition. No silencers and shipped to your door for $100.00 I also have a set of Tiger Shark paddles on Douglas red label rims for sale $60.00 Also have a set of Stock tires that have been studded with woody's studs for ice racing on ITP rims yours for $80.00. Have pictures for all and you can reach me at 734-637-7994 ask for Jon or email me at [email protected]

Sold to CFM Hope you enjoy.

This is a set of 1 year old V-Force3 reeds and SRP Billet intakes for stock cylinders and 26mm to 28mm carbs. Thay are in perfect condition. I went to a big bore setup and cannot use these anymore the bike was only riden about 5 times in that time period of 1 year. Paid $119.95 for intakes and $165.00 for reeds. Asking $150.00 shipped to your door.

Rolling chasis is powder coated BLUE TRANSLUCENT with powder coated silver accents. Comes with Tank, seat, electrical harness, tires and rims, radiator and lots of billet. All new bearings and bushings and a DURA BLUE +2 axle. $1200.00 or best. Motor: Lower end is a 1987 with a new HOT ROD crank comes with 90% parts to complete lower end. -Make offer Motor: Top end is a 2005 stock cylinderds and bore with pistons was running needed to go BIG bolt on and go - Make offer Pipes: PRO CIRCUIT PLATNUIM PIPES W/ BILLET HANGERS AND NO SILENCERS. $150.00 or best. Pipes: AAEN Performance pipes- Make offer Pipes: 2 into 1 setup w/ silencer- Make offer Paddle tires: Sand shark size 20" w/ Douglas rims- Make offer Carbs: Stock 26mm carbs w/ K&N filters and outers setup with idle screws. Make offer Reeds: One year old V-Force 3 reeds and SRP billet intakes w/rubber boots to fit stock carbs- $150.00 firm Iam selling this stuff for a buddy and you can email or call him with any questions Email: [email protected] or Cell: 810-531-9104 ask for Ryan. Have pictures of everything just ask and will email to you. Moving sale gotta go Here is the picture of the Rolling chasis.

Thanks for the feedback guys. I'am running on cement and at the dunes and the ice in the winter. My builder told me to go with a 15/39 set up. Going to try it. I also have 15/41 and 15/45 what do you guys think out of my 3 choices would be all around best fit.

Hello fellow riders Need some help with my current gearing 13/45 and it spins 1st, 2nd, and half of 3rd gear on payment. should i go to a 14/45 or maybe a 15/45 2005 Banshee Limited Edition Mods: CPI Drag pipes (out of frame) V-Force 3 reeds Billet intake +4 Degree key 409 Big bore mono block- Bored to a 415 Triple port and polished K & N pod filters 36mm Keihen carbs Dirt Digger carbon fiber clutch ITP .190 rimms and Sand Star tires front and back Laeger A-arms +2 Axis shocks w/resvoirs RPM carrier RPM Axle +2 +6 extended swing arm ProTaper SE bars Gearing-13/45 Compression is 165