chapmanmd

Thanks, Bro. I'll check out what is in there when I get home tonight and report back.

Yeah, I tried messing with the air screw. When I got the carb from Trinity, the air screw was all the way in. I started with the screw 1.5 turns out and went from there. I dropped the needle in the clip and that didnt help either. Any suggestions as to what pilot I should even be starting with? I did my plug checks and the main jet is good. I'm close to putting the dual carbs back on... Thanks.

Greetings. On my Banshee woods quad, I have a new Keihin 35mm PWK carb from Trinity. Other engine mods include: Trinity Stage II porting, Trinity cool head with 20mm domes, 3/8" Reed Spacers, Aktiv Reeds, Dynoport Pipe, CFM Aluminum airbox with K&N, and thats about it for the engine. My problem is this... It starts and idles great. It runs great from the midrange up. It has a wierd bog just off idle, but if you feather the throttle, it will rev. I'm new to the 2 into 1 thing and really dont know where to start fixing this issue. Any suggestions? Thanks. Mark Chapman

How much for the cylinders?

Please send me an email address and I'll send pics of the +2

I can relate to what you are going through with this . I bought a bumper for my son's TRX90 and he sent me one for a 400ex and then REFUSED to take it back and give me what I bought. THEN, I bought a pair of rear Hipers that when I received them, the whole hub was eaten up and they were unusable. Again, I took one in the ass. Never again will I buy from that . Mark Chapman

Looking for a good, used set of Hiper rear rims (4/115) Have lots of stuff to trade or will buy outright. Thanks. Mark Chapman

I'm looking for a good used set of rear Hiper rims. I have lots of stuff to trade or will buy outright. Thanks. Mark Chapman

I'm interested in the following stuff... Vitos 4mm stroker crank big bore cylinders that are ported for high end,on 69mm with forged pistons 34mm pj carbs with upi intake boots that are yellow works triple rate shocks with rezzies--just rebuilt,cost me $200 AMP link Denton steering stabilizer I have lots of stock and aftermarket stuff to trade.

No problem. I'll send them when I get home tonight. Around 5 central.

I have a NEW, never installed custom +2 chromolly swinger that I would consider trading. Mark Chapman

Ive got a NEW Lonestar Axcallibur Blaster Axle. The Blaster Axle is -4 for a Banshee, but it is adjustable +2 or +4 so you could go back to stock Banshee width.

The RAD carrier is NOT round housing. Its the billet, standard type carrier with bearings. The swingarm is NEW, never installed. It has the tapered bearing, round style carrier with bearings. I paid $770 for it. Make me an offer. This stuff needs to go. Rear rims (8x8, 4/115) with NEW Holeshot 18x8x11MX's... Again, make me a reasonable offer. Thanks.

Did you find one?

I've got a stock airbox with vented lid and k&N with powerflo. Make me an offer.

BET is running 2 Harescrambles this year. The first is next weekend, 3/20. 4.5 mile course that will prove to be alot of fun. One piece of advice, have skids on your quad. We're running 4 MX's this year, 4 TT's, and one HC as well. If any of you guys are going to race a TT this year at BET, please let me know, I'll see about leaving a pass at the gate for you. Bring your "A" game... Mark Chapman BET Track Official

I have a set of chrome powdercoat stock a arms if anyone needs them.

I was using Pyramid reeds. I went back to the Aktiv reeds on Trinity ported cages. I have tried DF3's and I didnt see alot for the money. I am sold on the Aktiv reeds, especially for the $$. Just my $.02 worth. Your mileage may vary.

I've got the following stuff that I need to clear out of the garage. I would prefer to trade for other aftermarket stuff. Stuff that needs to go: Banshee airbox with vented lid and K&N filter and Powerflo Stock front and rear shocks (red), rebuilt in 2002 87 J Arm chassis (red) with Lonestar +2 +1 upper v arms. No lowers, but can be bought through Lonestar 87 Swingarm with carrier NEW in box RAD Banshee Billet Carrier with bearings NEW Lonestar Axcallibur +2 +4 BLASTER axle 87 Banshee front hubs with newer rotors Used white banshee plastic. Rears look pretty good, fronts are a little beat up Probably other stuff I cant think of, but if you need it, ask. Stuff I Want: Aftermarket Front shocks for +2 +1 a arms Aftermarket rear shock Polished or chrome clutch side cover Billet water pump cover BLING!!! I dunno... tell me what you have to trade!!! Thanks. Mark Chapman

I'd personally like to invite all of you guys to come to BET in Belleville, IL to try our TT. I personally do not know of any better tracks around. We are celebrating our 40th year racing this year and we are one of the only races around that offer 150% payback for ATV's in pro classes. Visit our website at http://www.betdirt.com Click on "Schedule" for race dates. We will also be running a ST at the St. Clair County fair in August. Mark Chapman [email protected]