kracker2k

Hi, I'm looking for a battery for my 1997 Warrior. If you ahve a good working one cheap let me know or if you know of somewhere to get one cheap online or store please let me know. Thanks

I'd like an invite. [email protected] Thanks

As of today $6,000.00 CND = $5,167.20 USD for anyone who would like to know.

Hi, I need come parts for my 97 warrior. I need to get an rear axle, real axle carrior, rotor and caliper as well as the brake line. Any other misc parts that may be needed for the rear brake back by the axle I will probably need as well. Thanks

How was your luck with the method I proposed?

I just recently had this delema with my banshee. All I did was go to Autozone and ask too go in the back and found some high temp radiator hose that fit what I needed. Got a piece that was l shaped and about 12 inches long. Got this for about $5 and then bought eight hose clamps for about $0.50 each. I used some clipper things for hedge trimming to cut the hose into 5 pieces thowing away the angled piece and then I put it on. Ended up about $11 after tax for everything. Worked great and was cheap. Might want to try this. Take the small piece of exhaust with you and tell them you need some hose that pits snug on there and you should find something.

I'm planning to buy these parts either on ebay or from someone on here so I would like to find out which parts are interchangable that way I can know what to look for. A lot of people list stuff for banshee's and not for warriors but if they are interchangable then I have a better selection to buy from. Hilarious: If you could find out if the other parts are interchangable that would be great. Thanks

I just got a 1997 warrior and need to get some parts. I was wandering if parts from a banshee would work as they are close to the same on a lot of stuff... so I've been told. I think I will need to get a caliper, pads, rotor and possibly an axle. If some of these parts will work which ones and what years of banshee should I be looking at? Thanks

Do warriors have reverse? I'm looking for something 4stroke with reverse to use to move some snow this winter as well as fun to rid. I have a 97 banshee with aftermarket handlebars, axel nerfs, rims and RAZR tires... not sure what all else as I bought this used... carbs need adjusted before it will run right as I just replaced them and have not had time to adjust them yet... I could do this before we were to trade. I'm in NW ohio about 30mins from Indiana so we could meet half way if your interested. LMK if your interested, it is white with a powder coated frame and swingarm

I already sold the T3's... these carbs were suppose to be off a brand new bike with no changes. They appear to be brand new as well. The exhaust I got also looks brand new.. not even a scratch or rust spot anywhere... I thought they should go right on and be good. It just runs very rough and won't go over about 20mph... I don't want to hurt it running it to much and just want to know what to try to get it running just like stock. Thanks

The guy I bought it from had put 34mm carbs and Toomey T3 pipes with a stock motor. I'm not sure what he did wrong but it was not running right (kept fauling spark plugs). I took that crap off and sold it now I want it back to stock and running properly so I can sell it for the difference here locally and get my money back out of it. only road it twice. That is my reasoning behind it, right or wrong. I'll try those things you said and see if I can get it running when I get some free time. Working working 60hour weeks and then working on the house all weekend doesn't leave much extra time. Thanks

I just sold a pair of 34mm kehien PJ carbs with cable and throttle for $155 that I've been trying to sell for 9months... good luck finding some, they are out there all over

Mine is definately dead... anyone have one? Thanks

Looking for something cheap... maybe under $20 if I can find something Thanks

Hi, I'm looking for a nextel motorola phone as cheap as possible. Must be able to take a sim card (I think they all do). I would prefer i205, i305, i530, i730, i830 because I already have a charger that will work with these but will consider others that are cheap if you have a charger to go with it. Just need something cheap and quick to use until mine can get fixed. Thanks

Any help on this would be appreciated. Even a how to on adjusting carbs properly would be useful. Thanks

Hi, I'm taking my banshee back to stock and just put some stock carbs back on it and I'm having some problems, I already got a stock exhaust put back on it. First off, when I put them on and got it started one carb was stuck at full throttle. I realized the person who I bought the carbs off of had one of the floats in backwards. That part is taken care of now. The problem I'm having now is that it runs but there is not much power there and it smokes a lot more than normal. I tried messing with the adjustments on the TORs but can't seem to get it right with them, is there something else I can do to get these carbs adjusted right? I already sold my other pipes so I need to get this running properly now that it is back to stock. What should I start with to get this running properly? Thanks

If your intersted and come up with some money quickly I'll take $150+shipping for them. This is a heck of a deal as these have been going for $225-$250+inflated shipping on ebay. This offer is open to anyone with the cash at this time. Thanks

Would you be interested in some 34mm Keihin PJ carbs with cable and twist throttle? I'll make you a great deal on these. People keep backing out when they say they will take them and I just want to get rid of these things. Thanks

I don't currently have a pic... I'm looking into getting a digi cam but don't have one at this time.

I have a 1997 banshee that is mostly stock as far as motor goes. just took it back to stock carbs and exhaust actually. Has nerfs, aftermarket axel, rims handelbars. I think thats about it. Located in NW Ohio, I'll take $2500 OBO for it. Thanks

exhaust has been sold but carbs are still available as well as the jimmy... please make some offers

carbs still available... exhaust has been sold

Hi, I got a stock exhaust from someone a while back and they said it would come with everything that I needed to get it installed. Apparently it did not come with the gasket hoses for it or the clamps for them. Could anyone by any chance hook me up with these? I'll need all 4 of them 2 for the front parts and 2 for the back. Clamps would be nice if available but not necessary as I could get some clamps without any problem. Any help on getting these cheap/free would be greatly appreciated as I don't like to see my banshee sitting there not running. Also, if you happen to have some bolts that fit for the exhaust mounting to frame that would be great but I can go to Lowes and get these if necessary. Thanks

Sent a PM earlier today... made you a heck of a deal. I just want to get rid of these. Thanks